Question about HP - HP Photosmart 8250 printer

1 Answer

HP Photosmart 8250 Ink System Failure,error code Oxc18a0007. I've tried HP site for solutions with no success. Also tried re-installing software,replacing ink (all genuine HP) but no luck!

Posted by on

  • Anonymous Sep 01, 2008

    Will not print or fax, Ink system failure error code Oxc18a0007

    Any suggestions?

  • tallpaul1 May 11, 2010

    I read one solution, concerning Oxc18a0007, but don't know how to open the right-side cover of Hp 8250 to disconnect the ribbon cables.



    Thanks.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

Ink system failures is a very serious problem on HP printer systems. If you have this problem you should be ready to replace your printer. However there are still troubleshooting steps that you can do to try to resolve this problem. try this Ink System Failure Trouble shooting guide.

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oxc18a0007?


This is Ink System Failure Error.

You need to remove the Printhead and Cartridges and clean the golden contacts ( electrical contacts ) and clean them with lint free cloth.

If this does not fix the issue, You need to replace the Printhead/Cartridges

Regards,
Suhail

May 16, 2012 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

I replaced all new ink cartridges on my 8250 and now it says there is an ink system error.


Hello,

The "Ink System Failure" error is causes by air in the ink feed tubes. One of your old cartridges either run all of the way out or one of the new ones are defective. We have a step by step guide purging the air from the feed tubes posted on our web site. Go to our site at: www.ccl-la.com , click on the printer repair link and then the HP link. Follow the steps and you should be back printing in no time at all.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Jan 05, 2010 | HP Photosmart 8250 InkJet Printer

1 Answer

HP 8250 Photosmart printer that displays "system ink failure"


Try changing the ink cartridges.

If you installed the "HP Support Toolkit" software from the CD-ROM that came with the printer, use this Toolkit to "run a cleaning cycle".
It can print a "test" page, to show you which colours _do_ work, and which do _not_ work.

If all else fails, then find a qualified printer technician.

Dec 31, 2009 | HP - HP Photosmart 8250 printer

1 Answer

Ink failure system error


1. Turn the printer off for few minutes then turn it back on
2. Clean ink cartridge
3. Update drivers
4. If nothing works, repace the battery

Sep 07, 2009 | HP Photosmart 8250 InkJet Printer

1 Answer

We have the HP3210 All-in-one that indicates the OXc18a0007 printer error and can not find the solution.


hi I guess you are also getting error "Ink system Failue"
Try this:

Reset the system by holding down the OK, Cancel, Black, and Color buttons down at the same time and turn the 3310 off. Keep holding the buttons down until the printer shuts off and the turn it back on. You will have to turn the printer off twice and then it will recalibrate. Make sure you have new cartiges in the printer so that it can reset.
If, this does'nt
& if your printer is in warrenty Call 1-800-474-6836 and tell them about the error code and they will replace it in first go
Best of luck!!

Jul 03, 2009 | HP - HP Photosmart 8250 printer

3 Answers

Ink system failure


  1. Press the On button to turn the printer off.
  2. Unplug the power cord from the back of the printer.
  3. Remove all the ink cartridges.
  4. Wait two minutes.
  5. Plug the power cord into the back of the printer.
  6. Press the On button to turn the printer on.
  7. Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved.

Dec 11, 2008 | HP Photosmart 8250 InkJet Printer

1 Answer

Ink system failure


IssueAn 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. 
Solution
Press the On button to turn the printer off. 
Unplug the power cord from the back of the printer.
Remove all the ink cartridges.
Wait two minutes.
Plug the power cord into the back of the printer.
Press the On button to turn the printer on. 
Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved.
If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Dec 03, 2008 | HP Photosmart 8250 InkJet Printer

1 Answer

Ink system failure, error code 0XC18A0506


Ink system failures is a very serious problem on HP printer systems. If you have this problem you should be ready to replace your printer. However there are still troubleshooting steps that you can do to try to resolve this problem. try this Ink System Failure Trouble shooting guide.

Jul 30, 2008 | HP Photosmart 8250 InkJet Printer

1 Answer

Photosmart 8250 printing computer codes


my printer photosmart 8250 is printing does not print it says ink system failure when i try to replace it the yellow ink jet so please please help i'm in third world country my email address is abrbw@yahoo.com please help again

Jul 17, 2008 | HP Photosmart 8250 InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

1,345 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...