Question about Logitech Harmony 550 Remote Control

1 Answer

I can shut tv off or change channels---remote says safe node

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

Doing a firmware upgrade is the BEST way to recover from Safe Mode. A remote may go into safe mode itself for a variety of reasons.

However, if the remote fails to communicate with the PC when it is stuck in Safe Mode, please try the following.

1. Remove the batteries from the remote & check for any stuck buttons especially the Power button that may be causing the remote to stay in this state.
2. If it still will not apply firmware to get out of safe mode, then still without batteries hold down the #2 button while plugging into USB, and it should exit Safe Mode, and say something similar to 'Firmware Upgrade Success'. Even though it says this, still perform the Firmware upgrade since it was stuck in Safe Mode to begin with.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Nov 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I restore my access to Netflix?


I forgot my Netflix login or password. - Netflix Help Center

https://help.netflix.com/en/node/365

NetflixIf your Netflix login isn't working, this article explains how to regain access to your ... You can reset your password by receiving a password reset email, or by ...

My Roku freezes on the Netflix loading screen.

https://help.netflix.com/en/node/14236

NetflixHighlight the Netflix app and press the star key on the remote. Once you confirm by selecting Remove channel again, the device will be deactivated. Deactivating the Roku Streaming Stick in this manner will remove the Netflix channel from the main menu. Torestore it, select Streaming Channels > Movies & TV > Netflix.

Troubleshooting Network Connection Issues - Netflix Help ...

https://help.netflix.com/en/node/85

NetflixIf you are experiencing Internet related streaming issues such as the error "Cannot Connect to the Internet," this article will help troubleshoot your home network.

Jan 10, 2016 | Computers & Internet

1 Answer

RCA LCD TV gets stuck on one channel


sounds like you have an intermittent defective main board. ebay rca model for replacement board.

Jan 11, 2015 | RCA Televison & Video

1 Answer

The Zenith Digital TV Converter DTT900 needs reprogramming


1) While pressing & holding down the TV POWER button, press CHANNEL UP or CHANNEL DOWN repeatedly until your TV is turned on or off. 2) Release the TV POWER button when your TV is turned on or off. *Each press of the channel button sends a manufacturer code (1-45) to your TV, one after the other. Note: You may have to do this every time you change or remove the battery, as the remote will reset itself to the default code.

Nov 25, 2009 | Televison & Video

1 Answer

TV keeps shutting off and changing channels


hide all your remote controlls and put some tape over the front cover of the tv where you think the remote control reciever may be , if this fixes it then it means something is amiss with a rogue remote , most likely batterys..could even be sunlight ??

Jul 03, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

LG 42LC7D TV does not want to chg channels after 5 min of use


There are some inductors that are out of spec. LG's original SB said to replace some of these with a jumper, but it only lasted a couple months.

You need to have the Total Main Assy replaced.

Jul 28, 2008 | LG 42LC7D-UB Television

2 Answers

RCA rcr311w remote won't change tv channel to Video 1 or Video 2 channel


my universal unit won't change the tv channels, everything else works except the channel changing. Does anyone have a solution., The company is only open during the week.

Feb 08, 2008 | RCA RCR311B Remote Control

1 Answer

Cannot change channels in digital mode


Solution that worked for me:

Beware: Although the process should be safe, it technically voids your warranty.

Enter the service menu:
1 - turn of tv with remote
2 - press and release in the following order on the remote: Info, Menu, Mute. Make sure remote is pointing at the tv
3 - turn on the tv from the remote
4 - you will see the service menu. using the down arrow on the remote select the Reset option. Using the right arrow button at this point will do a hard reset.
5 - Wait a few seconds, turn TV on
6 - you will have to rescan analogue and digital channel but it should be working now.

Jan 29, 2008 | Samsung LE26R73BDX 26 in. HD-Ready LCD...

Not finding what you are looking for?
Logitech Harmony 550 Remote Control Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Jerry Umali

Level 3 Expert

979 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14873 Answers

Are you a Logitech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...