Question about Canon Office Equipment & Supplies

1 Answer

I replaced my ink cartridge in MP470 after removing the protective tape and making sure it was well seated but I still get the "out of ink" screen. ????

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Canon Expert
  • 231 Answers

Did you use a replace or an original cartridge?
if it was a replace the error is normal, but do not dispare just press resume/cancel for at least 10 seconds, after this the ink counter will be canceled and you will not get the "out of ink" screen any more.

Posted on Nov 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ink cartridges keep popping out when i close the printer door


The cartridges are not seating all the way - are you sure all the tape has been removed from the cartridge? Also, use a flashlight and look on the ink cartridge carriage - make sure there's no paper of tape sitting on it that would keep the ink catridges from seating properly. The ink cartridges should go in and you should feel them click into place.

Nov 16, 2013 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Instructions on how to install the printers ink


Solution: Replace ink cartridge(s) MP210

Replacing An Ink Cartridge Use the following procedure to replace empty ink cartridges or when an ink cartridge error appears.
  1. After confirming that the printer is powered on, open the scanning unit (printer cover). The ink cartridge holder moves to the replacement position.

    Note: After confirming that the scanning unit support is fixed into position, release your hands.


    lidopened.jpg
    *MP470 shown

  2. Press down on the semi-circular tab (circled area in , above) to release the cartridge and then remove it.


    Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.


    05sj00081_06_en.gif

    *Optional cartridges PG-40 and CL-41 shown in examples

  3. Remove and replace each cartridge individually. Or, remove the second cartridge after the first has been removed.

  4. Take out a new cartridge from its casing and gently remove the orange protective tape in the direction of the arrow.

    05sj00081_02.jpg


    Note: - Do not attempt to reattach the protective tape once you have removed it.
    - Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.

    05sj00081_03.jpg

  5. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*

    *One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. It does not matter if the capacities (Standard or High) do not match.

  6. Push up on the front of the cartridge until it locks into place. (A click sound will be heard when the cartridge is locked in place.)

    05sj00081_04_en.gif

  7. Confirm that the ink cartridges are installed properly.



    05sj00081_04.jpg
    The ink cartridge is not installed properly.

    The ink cartridge is installed properly.

  8. Fold the scanning unit support and close the scanning unit (printer cover).

  9. Wait until the preparatory operation is complete; it takes about one to two minutes.

Mar 31, 2011 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

When I Turn on my Canon Pixma Mp210 the error 6 pops up. I try to restart my printer, but it didn't help. What this error means and what to do?


Issue: ERROR LED: E, 1, 6
Solution: Press and hold Stop/Reset button for at least five seconds

Clearing the Ink Error If you want to continue printing in this condition, press and hold the <Stop/Reset> button on the printer for at least five seconds, and then release it. Replace the ink cartridge and close the Scanning Unit (Printer Cover).

If printing is in progress and you want to continue printing, press the Stop/Reset button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.

The function for detecting the remaining ink level will be disabled.

Replace the empty ink cartridge immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under the ink out condition.

Issue: ERROR LED: E, 1, 6
Solution: Replace ink cartridge(s) MP210


Replacing An Ink Cartridge Use the following procedure to replace empty ink cartridges or when an ink cartridge error appears.
  1. After confirming that the printer is powered on, open the scanning unit (printer cover). The ink cartridge holder moves to the replacement position.

    Note: After confirming that the scanning unit support is fixed into position, release your hands.


    lidopened.jpg
    *MP470 shown

  2. Press down on the semi-circular tab (circled area in <1>, above) to release the cartridge and then remove it.


    Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.


    05sj00081_06_en.gif

    *Optional cartridges PG-40 and CL-41 shown in examples

  3. Remove and replace each cartridge individually. Or, remove the second cartridge after the first has been removed.

  4. Take out a new cartridge from its casing and gently remove the orange protective tape in the direction of the arrow.

    05sj00081_02.jpg


    Note: - Do not attempt to reattach the protective tape once you have removed it.
    - Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.

    05sj00081_03.jpg

  5. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*

    *One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. It does not matter if the capacities (Standard or High) do not match.

  6. Push up on the front of the cartridge until it locks into place. (A click sound will be heard when the cartridge is locked in place.)

    05sj00081_04_en.gif

  7. Confirm that the ink cartridges are installed properly.



    05sj00081_04.jpg
    <1> The ink cartridge is not installed properly.

    <2> The ink cartridge is installed properly.

  8. Fold the scanning unit support and close the scanning unit (printer cover).

  9. Wait until the preparatory operation is complete; it takes about one to two minutes.


Trust this is helpful. :)

Dec 10, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

How do I take out the ink cartridge?


Replacing An Ink Cartridge Use the following procedure to replace empty ink cartridges or when an ink cartridge error appears.
  1. After confirming that the printer is powered on, open the scanning unit (printer cover). The ink cartridge holder moves to the replacement position.

    Note: After confirming that the scanning unit support is fixed into position, release your hands.


    lidopened.jpg
    *MP470 shown

  2. Press down on the semi-circular tab (circled area in , above) to release the cartridge and then remove it.


    Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.


    05sj00081_06_en.gif

    *Optional cartridges PG-40 and CL-41 shown in examples

  3. Remove and replace each cartridge individually. Or, remove the second cartridge after the first has been removed.

  4. Take out a new cartridge from its casing and gently remove the orange protective tape in the direction of the arrow.

    05sj00081_02.jpg


    Note: - Do not attempt to reattach the protective tape once you have removed it.
    - Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.

    05sj00081_03.jpg

  5. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*

    *One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. It does not matter if the capacities (Standard or High) do not match.

  6. Push up on the front of the cartridge until it locks into place. (A click sound will be heard when the cartridge is locked in place.)

    05sj00081_04_en.gif

  7. Confirm that the ink cartridges are installed properly.



    05sj00081_04.jpg
    The ink cartridge is not installed properly.

    The ink cartridge is installed properly.

  8. Fold the scanning unit support and close the scanning unit (printer cover).

  9. Wait until the preparatory operation is complete; it takes about one to two minutes.

Dec 09, 2010 | Canon PIXMA MP210 InkJet Printer

1 Answer

Impossible to insert the cartridge in a printer always shows that it is not a good loaded


:
  1. After confirming that the printer is powered on, open the scanning unit (printer cover).The ink cartridge holder moves to the replacement position.

    Note: After confirming that the scanning unit support <1> is fixed into position, release your hands.


    lidopened.jpg
    *MP470 shown

  2. Take out a new cartridge from its casing and gently remove the orange protective tape in the direction of the arrow.

    05sj00081_02.jpg


    Note: - Do not attempt to reattach the protective tape once you have removed it.
    - Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.

    05sj00081_03.jpg

  3. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*

    *One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. It does not matter if the capacities (Standard or High) do not match.

  4. Push up on the front of the cartridge until it locks into place. (A click sound will be heard when the cartridge is locked in place.)

    klikinthekart.gif

  5. Confirm that the ink cartridges are installed properly.



    correctincorrect.gif
    <1> The ink cartridge is not installed properly.

    <2> The ink cartridge is installed properly.

  6. Fold the scanning unit support and close the scanning unit (printer cover).

  7. Wait until the preparatory operation is complete; it takes about one to two minutes.

Removing Ink Cartridges:
  1. After confirming that the printer is powered on, open the scanning unit (printer cover). The ink cartridge holder moves to the replacement position.

  2. Press down on the semi-circular tab to release the cartridge and then remove it.


    Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.


    removethecarts.gif

  3. Remove and replace each cartridge individually. Or, remove the second cartridge after the first has been removed.

  4. Fold the scanning unit support and close the scanning unit (printer cover).

Nov 30, 2010 | Canon PIXMA® MP210 Printer

1 Answer

I replaced my Canon ink cartrige in MP470 after removing the protective tape and making sure it was well seated but I still get the "out of ink and change cartridge" screen. ??????


If the ink error doesn't clear after you close the lid, switch the printer power off for few seconds. If that doesn't work, try removing and fitting the cartridge again.
Are you sure the error is for the colour cartridge - not the black this time??
If you can't get it to reset, don't panic. It will still print as normal. If it stops and asks for a new cartridge, holding the Stop/Reset button for 10 seconds will make it work again.

hope this helps

LC
www.inkbank.com.au

Nov 10, 2010 | Canon PIXMA MP470 All-in-One Printer

1 Answer

I CAN NOT INSTALL THE INK TO MY CANON PRINTER. WHAT DO I DO FIRST. IT IS A CANON PRINTER MP210


Use the following procedure to replace empty ink cartridges or when an ink cartridge error appears.
  1. After confirming that the printer is powered on, open the scanning unit (printer cover). The ink cartridge holder moves to the replacement position.

    Note: After confirming that the scanning unit support is fixed into position, release your hands.


    lidopened.jpg
    *MP470 shown

  2. Press down on the semi-circular tab (circled area in <1>, above) to release the cartridge and then remove it.


    Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.


    05sj00081_06_en.gif

    *Optional cartridges PG-40 and CL-41 shown in examples

  3. Remove and replace each cartridge individually. Or, remove the second cartridge after the first has been removed.

  4. Take out a new cartridge from its casing and gently remove the orange protective tape in the direction of the arrow.

    05sj00081_02.jpg


    Note: - Do not attempt to reattach the protective tape once you have removed it.
    - Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.

    05sj00081_03.jpg

  5. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*

    *One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. It does not matter if the capacities (Standard or High) do not match.

  6. Push up on the front of the cartridge until it locks into place. (A click sound will be heard when the cartridge is locked in place.)

    05sj00081_04_en.gif

  7. Confirm that the ink cartridges are installed properly.



    05sj00081_04.jpg
    <1> The ink cartridge is not installed properly.

    <2> The ink cartridge is installed properly.

  8. Fold the scanning unit support and close the scanning unit (printer cover).

  9. Wait until the preparatory operation is complete; it takes about one to two minutes.

Oct 11, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Problem on a canon 3100


The Power Light Flashes Orange - Error Codes When an error occurs, the power light flashes orange. The number of orange flashes followed by a long green flash indicates the cause of the problem.
Two orange flashes: Out of paper, paper jam, or paper feed error
If no paper is loaded in the auto sheet feeder, or if the paper is not loaded correctly, set the paper correctly and press the Resume button on the printer to continue printing.
Three orange flashes: Paper jam
If paper has jammed in the printer, carefully remove the jam and press the Resume button to continue printing.
Four orange flashes: A tank inside the BJ cartridge (print head) is out of ink
Replace the empty BJ tank and press the Resume button to continue printing.
Five orange flashes: BJ cartridge is not installed properly
Remove and reseat the cartridge correctly. Make sure the orange protective cap and tape have been removed. Make sure the blue locking lever is locked down securely.
Six orange flashes: BJ cartridge (printhead) is not installed
Remove and reseat the cartridge correctly. Make sure the orange protective cap and tape have been removed. Make sure the blue locking lever is locked down securely.
Seven orange flashes: BJ cartridge (printhead) is defective
Remove the BJ cartridge and check that the contacts on the cartridge and cartridge holder are clean. Make sure the orange protective cap and tape have been removed and reinstall the cartridge. If the error occurs again after you resume operation, you may need to replace the BJ cartridge.
Eight orange flashes: Waste ink absorber almost full
The printer has a built-in waste ink absorber to hold the ink that is consumed during print head cleaning. This error indicates that the waste ink absorber is nearly full. Press the Resume button to skip the error so you can continue printing.
The POWER light flashes orange and green alternately: Service error
A service error means the printer requires the attention of a qualified technician. Count the number of flashes. (You may be asked this information.)

Feb 02, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Install ink


Installing / Removing Ink Cartridges To print normally, install or remove ink cartridges in an orderly procedure. Installing ink cartridges:
  1. After confirming that the printer is powered on, open the scanning unit (printer cover).The ink cartridge holder moves to the replacement position.

    Note: After confirming that the scanning unit support <1> is fixed into position, release your hands.


    lidopened.jpg
    *MP470 shown

  2. Take out a new cartridge from its casing and gently remove the orange protective tape in the direction of the arrow.

    05sj00081_02.jpg


    Note: - Do not attempt to reattach the protective tape once you have removed it.
    - Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.

    05sj00081_03.jpg

  3. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*

    *One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. It does not matter if the capacities (Standard or High) do not match.

  4. Push up on the front of the cartridge until it locks into place. (A click sound will be heard when the cartridge is locked in place.)

    klikinthekart.gif

  5. Confirm that the ink cartridges are installed properly.



    correctincorrect.gif
    <1> The ink cartridge is not installed properly.

    <2> The ink cartridge is installed properly.

  6. Fold the scanning unit support and close the scanning unit (printer cover).

  7. Wait until the preparatory operation is complete; it takes about one to two minutes.

Removing Ink Cartridges:
  1. After confirming that the printer is powered on, open the scanning unit (printer cover). The ink cartridge holder moves to the replacement position.

  2. Press down on the semi-circular tab to release the cartridge and then remove it.


    Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.


    removethecarts.gif

  3. Remove and replace each cartridge individually. Or, remove the second cartridge after the first has been removed.

  4. Fold the scanning unit support and close the scanning unit (printer cover).
I hope it helps!!!

Dec 08, 2007 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1985 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...