Question about Samsung HC-P4752W 47" Rear Projection HDTV-Ready Television

1 Answer

HCP4752W Board Hi where did u Buy the HCP4752W Board from and is it a easy replacement Thanks

Posted by on

  • enoehttemi Jun 20, 2008

    Hi
    Well there was a power out while i was at work when i got home and turn the TV it gave me nothing so i turn it off and back on again then it came on but the colours were all off and out of focus
    and a smell of something burning came from the back of the tv
    Thanks


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 8,617 Answers

Respond to this post and let me know what your symptoms are and I will post a link to where you van get the correct board that will fix your TV.

Posted on Jun 19, 2008

  • Sonny Berry
    Sonny Berry Jun 20, 2008

    You need the P59A convergence amp, you can get one at the following link with free shipping takes 5 minutes to replace just un plug yours and plug in the new one very easy the board is all by itself no where near anything dangerous. Hers the link

    http://servicemanuals.vstore.ca/

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a model HCP4752W. The picture has a ghosting with the colors out of sinc.


hi, i believe this is an issue with the projection system, samsung had a recall recently for this issue, i recommend getting in contact with them!

Sep 09, 2010 | Samsung HC-P4752W 47" Rear Projection...

1 Answer

Thanks for advice with my Samsung HCP4752W Projection TV. No the board I ordered was not form Samsung, and I did not take care of the problem. It was about the same, so I pulled it and put the old back. My...


Find Q433 and replace it with NTE54 this will solve your problem Mats should have them 1-800-628-1118
Also Visit this website Encompass Parts Distrubtion
they will list Parts and Prices 1-800-638-3328

Mar 23, 2010 | Samsung HC-P4752W 47" Rear Projection...

1 Answer

I have a samsung hcp4752w and replaced the sub board, worked fine just need alighned in lower right corner, will not enter mute 183 power to adj convergence, will enter 182 fine. I checked all setting and...


Have You Replaced Convergence ICs,If not replace Both of them and 2 resistors 2.7ohms 1watt ICs are STK ICs big Black IC will have part number on them STK392-020. Mats Electronics has them in stock
1-800-628-1118

Feb 20, 2010 | Samsung HCP4252W 42" Rear Projection...

1 Answer

Changing bulb


Hi,
Changing bulb in Sony KDF-60XBR950 is easy.
Click Sony Support to download lamp replacement instruction manual for your TV.
Please buy Sony original lamp/ bulb for your TV safety.
Thanks.

Dec 29, 2009 | Sony Grand WEGA KDF-60XBR950 60" Rear...

2 Answers

Samsung HCP4752W convergence board?


I couldn't decide whether or not to attack the IC Chips or the whole board, so I took out my S&W model 59 and pumped 11 9mm rounds into the whole chassis! Sets works as new as long as 'new' means comes with 11 bullet holes in chassis.

May 12, 2009 | Samsung HLN437W 43" Rear Projection HDTV

1 Answer

Convergence issue with samsung HCP4752W


When you change the convergence board you must do a complete factory alignment. If you have never done this, do not attempt it, call a svc. co. You won,t regret it. Just curious, why didn't you repair the original?

Mar 23, 2009 | Samsung HC-P4752W 47" Rear Projection...

1 Answer

Sony KP 51WS510 convergence problem


Please check pico fuses in D board and confirm +22 & -22 volt supply to convergence ICs.
Fuse numbers are as follows...

PS8001, PS8002, PS8003, PS8004, PS8005, PS8006


Dec 21, 2008 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Convergence


Sounds like convergence amp ic's
i dont have any part number for that model.
Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://www.hdtvoice.com/voice/showthread.php?t=28929
Or send to ptscorp.com
http://www.hdtvoice.com/voice/index.php?s=

STK392-010 replace with STK392-040


good luck
please mark the post with a fixya

Feb 24, 2008 | Samsung HC-P4752W 47" Rear Projection...

2 Answers

Wavvy lines, wiggy


Dougers, I am next door, in Alberta. I have fixed my hyperboard by replacing the surface mount caps myself in my workshop for a fraction of the cost of a replacement board.
See my other thread for more information.

Oct 23, 2007 | Toshiba 57H82 57" Rear Projection...

Not finding what you are looking for?
Samsung HC-P4752W 47" Rear Projection HDTV-Ready Television Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...