Question about Lexmark E250d Laser Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Paper jam Lexmark E250d
I hate to state the obvious and I am not patronising you, but is the rear door fully closed (did it click into place) - probably. I wonder how many pages the printer has printed? If you are lucky you might be able to print out a demo page (hold the "okay" button down - the large one with the diamond/triangle on it). If it is a high number (say over 10,000 pages) then perhaps the paper pick rollers have stopped working? Also, what paper are you using? Heavy (100gsm or above) or thin (under 75 gsm) may have feed problems.
If this doesn't work you could always try printing to the rear door - this would probably stop the jam hopefully. This would enable you to print a demo page at least so you can see its page output.
Hope this helps you out.
Posted on Oct 01, 2008
Well I kept trying to find out the solution as I don't have any user's guide with me and finally I got a hint. I just reinstalled drivers & related software which solved the problem. Printer is new
there cann't be any other type of problem like toner or developer etc. So this is a very positive approach to reinstall the software.
Posted on Jan 15, 2009
SOURCE: my Lexmark E250d will not
Here is how to reset the photoconductor kit counter:
1. Make sure the new kit is installed and the printer is turned ON.
2. Open the front panel.
3. Hold the Cancel button in until the front panel LEDs flash.
4. Close the front panel
Posted on Mar 26, 2009
Tips for a great answer:
Toner light is ON, I would assume that the light is solid and not blinking. You can press and release to clear the light sequence and continue processing the print job. With the printer turned off, remove the toner cartridge and shake it to extend its life. Check the replacement toner cartridge if it is the one suitable for your region.
If the blinking light is on Toner Low, press and release the Continue button (green button) to clear the light sequence and continue processing the print job. If the light is still blinking, the photoconductor is almost full and should be replaced.
For further assistance, please call Lexmark Technical Support.
Apr 12, 2011 | Lexmark E260dn Laser Printer
Mar 02, 2011 | Lexmark E250d Laser Printer
Dec 15, 2010 | Lexmark E250d Laser Printer
Nov 24, 2010 | Lexmark E250dn Laser Printer
Feb 05, 2010 | Lexmark E250d Laser Printer
Aug 17, 2009 | Lexmark E250d Laser Printer
Apr 22, 2009 | Lexmark Z640 InkJet Printer
Jan 14, 2009 | Lexmark E250dn Laser Printer
Sep 13, 2008 | Lexmark X2500 All-In-One Printer
91 people viewed this question
Usually answered in minutes!