Question about Acoustic Research 900MHz Wireless Stereo Speakers with Auto Tuning

1 Answer

Wireless speakers My tv while fairly new has only input plugs. The speakers must be hooked to output. My DVD player has output and the speakers work with it, but we cannot control the tv volume this way. What can we do? Patsy Sebera psebera@hopewell.k12.va.us or pjsebera@comcast.net.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 100 Answers

Salutations pjs52,

Regrettably there isn't an easy way to connect the speakers to your television directly. One thing that would make this easier would be if you are lucky enough to have a headphone jack on the tv, you should be able to buy a mini-plug to RCA adapter.

Otherwise, regrettably I can not foresee a way to make this type of connection with out a home theater receiver but then it would control the volume and not your television.

I wish I had better news.

P.S. For future postings its not advised to include personal information such as your email address. It opens you up to possible spam emails by posting it on a public forum.

Jon
Go Ahead. Use Us.

Posted on Jun 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RCA DRC247N DVD Player No Audio


The separate DVD player has three output cables: video (yellow), right audio (red) and left audio (white?). These connect to the corresponding inputs on the TV. If your cable box also has three similar output cables, you probably do not have a second set of inputs on the TV so what to do? You can purchase three Y adapters that combine two female RCA connectors into one RCA plug and plug everything into your one set of connectors on the TV. However, if your cable box output connects directly to the TV antenna input, the solution is simpler. Post a comment if this approach is not going to work

Oct 13, 2012 | RCA DRC247N DVD Player

2 Answers

Picture in picture operation & connection to dvd player


Now--first--connect the DVR cable box HDMI output to the HDTV HDMI input (use the lowest numbered one e.g. HDMI 1) for this connection. Use a standard (not Monster brand) HDMI cable for this connection. Then turn on the TV, turn on the cable box and switch the TV to the HDMI input. A picture should come on. You may even hear the audio on the TV speakers. If so, that is OK.

Then--connect the component video output of the DVD HT to the TV component 1 input. Use a three wire component video cable with red, blue and green connectors on each end. Connect color to color on both ends. Then turn on the DVD, put a DVD in the player and start it running. Switch the TV to the component input and it should show a pix. The audio will come from the DVD player speakers.

If your DVD player does have an HDMI output, you can use it and just connect as above to the second TV HDMI input.

To get audio from the cable box out of the DVD player speakers, you will need to connect an audio cable from the cable box go the HT amplifier. Use a set of RCA patch cables and go from the analog audio output of the cable box to the rear panel audio inputs of the DVD player. The owners manual for this unit will give directions on using this input. Since your HT unit does not have any other inputs, you will not be able to get Dolby Digital audio.

Hope this gives you food for thought. If so, and you have more questions, just come back in with a follow up.

Good luck. Remember, the owners manuals all have hook up connections diagrams. Sometimes they will help.

Dont forget to rate me as fixya..

Jan 30, 2008 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Have lenoxx ht 500 surround sound speakers & dvd but dvd is broken, need to purchase another dvd player but can't source lenoxx model, what other models can i connect surround sound to? or whe


If your surround sound receiver unit has rca audio inputs(red/white), you can hook up any brand of DVD player that has rca outputs. You would hook the yellow output from DVD player to yellow input on TV. Hook red/white output from DVD player to red/white input on surround receiver. Hope this helps.

Jan 03, 2012 | Audio Players & Recorders

1 Answer

What channel do I set the TV on so that the dvd will play


Hi,
Hook audio/ video cable from dvd player to AV input of tv and select that AV input in tv to watch dvd playback picture.
You will see yellow jack (for video signal output) and red-white jacks (for audio left-right output signal) at rear of dvd player, plug AV Cable and hook it in AV input of tv, make sure yellow pin connected in yellow jacks of dvd and tv.
Thanks.

Feb 18, 2011 | Sony DVP-SR200P DVD Player

1 Answer

How do i hook up my dvd recorder to my dvd player? where do i hook my cords to?


You need RCA cables to do this.These have red yellow and white cable ends.The yellow is for video the white is for the left speaker,red for the right speaker.Run the RCA cables from the output of you DVD player to the INPUT of your dvd recorder.Run another set of RCA cables from the output of your dvd recorder to the input of your TV.Most modern tv's have these inputs. These RCA cables can be purchased at Radio Shack or places like Walmarts.

Jan 10, 2010 | Lite On LVW-5005X DVD Recorder

1 Answer

Have an RCA F27636BC TV. Can u hook a DVD player


How to hookup TV

If you have a TV with only a single coax input and you want to hook up components like DVD players and VCRs, here's how to do it.



What you need to connect your DVD player or game players to a TV that only has a VHF/UHF 75-ohm F-connector ("coax antenna input").

1.) RF Modulator with Stereo Audio Inputs.



2.) 6 foot long coaxial cable with male "F" connectors. This cable goes from the modulator to the TV. The modulator also has a coaxial input to plug in your antenna or your VCR.



3.) 6 foot long Video and Audio Cables with "RCA" plugs. The cables connect the yellow, red and white outputs from your DVD or game player to the yellow, red and white inputs of the modulator.





Works with X-Box, PlayStation, Nintendo or other devices that output audio/video via the RCA plugs and you want to connect them to your coaxial only TV.

Nov 24, 2009 | RCA F27636BC 27" TV

1 Answer

I want to hook up my bose speaker systerm to my new vizio tv


Real easy, get a RCA audio cable (red and white ends) that is long enough to go from the tv inputs to your receiver inputs. Plug one end into the audio out on the back of your tv, then plug other end into input on your receiver (tv, cd or vcr). Now everything going to tv will output to receiver also. You may have to go into the TV menu and under audio, set audio output to fixed. Then you can change the volume on your receiver which is best way to go.

**Advanced** If your TV and receiver has optical capability you can use an optical cable instead.

Good luck,

Mar 23, 2009 | Vizio VW42LF 42 in. LCD HDTV

1 Answer

Center and wireless speakers not working


are you tryng to get digital surround ? you can only get left and right audio or virtual surround sound if there is no optical or coax digital audio input connected from the sources digital output for that selection

Mar 06, 2009 | Panasonic 1000W 5.1-Channel Home Theater...

2 Answers

I CAN NOT GET ALL 5 SPEAKERS TO WORK


I know this is not the answer that you want to hear, but: That television is not capable of delivering audio output to all 5 speakers - it is a stereo-only TV, which only delivers 2 channels.

Furthermore, that Coby DVD-937 only has Digital Audio outputs rather than inputs, which is very strange and complicates our problem immensely. You will get 5-channels with DVD or radio play, but getting 5 channels for TV is not possible without additional equipment.

The manual for the Coby mentions a "Digital Decoder Amplifier," which would work. You would connect a digital audio cable from the area marked "Coaxial" on the back of the Coby to a digital audio IN on the back of an external amplifier. You would connect the speakers to this amplifier, instead of directly to the back of the Coby. Then you would need a cable or satellite box with digital audio outs (fairly common nowadays) to another digital audio IN on the back of the amplifier. The cable or sat box you may have already, but you may need to purchase such a "Digital Decoder Amplifier" or other digital amplifier with appropriate speaker wires and 2 digital audio input slots (not to mention two digital audio cables). Fairly complex. Possibly expensive.

-Tha Mp3 Doctor

Feb 20, 2009 | Coby DVD-937 5.1 Channel DVD...

1 Answer

Need a diagram to hook my Bose CinemaT speakers. When I hook it directly to the tv no problem but can't figure out how to hookup my reciever and CD player to work also? Help Please


You'd be better off hooking the speakers to the RECEIVER'S speaker outputs, THEN hooking your TV audio output to an unused receiver input, such as AUX. The signals from your receiver cannot reach the TV; thus your CD player and radio will not play through the speakers if the speakers are hooked to the TV. All receiver INPUTS are designed to accept the same signal level; thus, you can use any input for your TV audio, such as Aux, DVD, CD, etc. Just remember which input you're using for the TV audio, and everything should work fine. Almost all receivers have an AUX input; hopefully yours also has a dedicated CD input to avoid confusion. The you simply select the AUX input to hear your TV through the speakers.

Dec 26, 2008 | Bose Cinemate Digital Home Theater System...

Not finding what you are looking for?
Acoustic Research 900MHz Wireless Stereo Speakers with Auto Tuning Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acoustic Research Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4852 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you an Acoustic Research Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...