Question about Vacuums

1 Answer

We just moved in - the house is about 9 years old. I have a Eureka Mega Boss central vac - looks like model # is CV20220. 12.4 amps, 120 volts. Can't figure out what type of bags I need. Can you help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 147 Answers

Well, for this unit you will need any of the following bags,

Eureka genuine Part# 90610
Eureka replacement (Central vac bag)
another genuine bag style called CV-1, and/or CV-2
Kenmore Central vac bags

Most of the bags there are available at your local vacuum shop, and sometimes even Sears. The Kenmore central vac bag is, can and will fit your Eureka Mega Boss. Prices range on these bags anywhere from $12-$20 for packages of 3. Generally you will replace a bag once every 3-4 months.

Good luck,
Mark

Posted on Nov 10, 2010

Testimonial: "Thanks a ton! Very helpful!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the reset button the eureka the boss smart vac


There are many different models of Boss Smart vac so I can't say for sure without your model number but it most likely does not have a reset button. It may have a reset switch built into the motor.

Feb 26, 2017 | Eureka Vacuums

1 Answer

What filters do I use for this? does the Hf-9 work?


Hey, this is Jeremy with Crucial Vacuum,

Unfortunately, you did not include what kinda of vacuum you were trying to make sure the Eureka HF-9 filter was compatible with. Below I have compiled a list of all of the models that the HF-9 filter will work with for you.
  • Fits Eureka Upright Style HF9 Victory & Whirlwind Vacuums.
  • Eureka Victory - 4300, 4400 & 4600
  • Eureka Victory Enviro Vac - 4370, 4377, & 4470
  • Eureka Self Propelled - 5184, 5185, 5187, 5188, 5190, 5191, & 5196
  • Eureka Whirlwind - 4180, 4380, 4381, 4480, 4481, 4483, 4488, 4489, 4580, 4686, & 4689
  • Eureka The Boss - 4672
  • Eureka Smart Vac - 4469, 4473, & 4476 & Sanitaire- S4170, SC4570, & SC4580 models.

You can purchase replacement parts for Eureka (including the HF-9 filter) direct from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10
http://www.crucialvacuum.com/eureka.html

I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Jeremy Lerner
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

Aug 12, 2015 | Vacuums

1 Answer

My home has a central vacuum system hook-up but no vacuum installed. My friend upgraded his central system and gave me his Eureka Mega Boss central vacuum system and the accessories, including the pow


The power head requires 120 Volts. Some hoses have a receptacle in the handle for the power head plug, and the hose has a cord at the wall inlet end that plugs into a receptacle. Some hoses have a plug at the wall inlet end that plugs into a 120Volt receptacle built into the inlet. The hose plugs into this receptacle when you push the hose into the inlet. The power for this built-in receptacle is wired with line voltage when the system is installed.

Apr 15, 2012 | Eureka 1810 Central System Vacuum

1 Answer

How do i change the vacum belt on my eureka mega boss


Turn the unit upside down and remove the screws holding the bottom plate on. After you do that, you will be able to access the belt.

Jul 01, 2011 | Eureka Mega Boss 4460DT Vacuum

1 Answer

Bag model for Eureka Mega Boss 4460 type E


The model 4460 is for a Victory model which uses Eureka Type AA bags

They can be found at http://www.totalvac.com/eureka_aa_bags.html

Jun 10, 2010 | Eureka Mega Boss 4460DT Vacuum

1 Answer

I have a Eureka 'The Boss Smart Vac'. The beater


Yes, you need to replace the belt. You should actually change this belt every year. Here is a link to the belt you need and the manual which has instructions:

Eureka The Boss Smart Replacement Belts

Owner's Guide (3,666K download)

Dec 09, 2009 | Eureka Smartvac 4870 Bagged Upright Vacuum

1 Answer

I need hepa filter specification for eureka upright mega boss.it is not bagless.


http://www.eureka.com/servlet/FindOwnersGuide

"You will find your model number on a metallic silver-colored rating plate. It’s usually located on the back or bottom of the cleaner. Here is an example of a rating plate: You will find your model number on a metallic silver-colored rating plate. It’s usually located on the back or bottom of the cleaner."

"Not all accessories, supplies, owner's guides or Eureka program details are available online. If you can't find what you're looking for, you can call 1-800-282-2886 for assistance. Our Service Representatives are available Monday through Friday, 8 a.m. to 7:30 p.m. Central Time, and Saturday and Sunday, 10 a.m. to 6:30 p.m. Central Time. Our Service Representatives will need your vacuum's model number, so please have it ready when you call."

Feb 25, 2009 | Eureka Mega Boss 4460DT Vacuum

2 Answers

Getting a Eureka central vac cloth bag back in after cleaning


The easiest way is probably to take the unit off the wall turn it upside down. This will give you some leverage. I would not try to get the ring in all at once, but leave a little out and then that piece that is left out you might need to bend it a little to get it in. There really is no trick that is why I am not a big fan of filtered central vacs. I prefer true cyclonic.

Feb 21, 2009 | Vacuums

1 Answer

Eureka central vac 's power stopped won't start again.


I took to dealer I bought from . He examined it. The motor is gone needs new one. Thanks, Ann

Jan 24, 2009 | Eureka 1810 Central System Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...