Question about Kenmore Sewing Machines

1 Answer

I got a 1950 sewing machine set in a table with a knee control for the pedal. The light comes on, but I am not sure how to make the knee pedal work. There is a lever and I have moved it, but nothing happens. What should I do next? Do I need to look at electrical connections? Do I need to move the lever to certain position?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,788 Answers

Have you tried getting a copy of the owners manual? You can usually download one for $10 at www.sewingmanuals.com or go through Sears. I remember having a machine with a knee control and it seems to me that you only had to pick your stitch length and press the knee control to make it sew. Mine was a straight stitch only Singer. Do some research online with your model number, google it and see what you find. Good luck

Posted on Nov 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My riccar 555su machine starts sewing as soon as I plug in. Foot pedal is stationed inside cabinet by knee, but I'm not controlling it.


The pedal is stuck in the ON position. Unplug the sewing machine and try to open up the pedal to inspect it. Or try pressing the pedal a few time to loosen up the pedal movement. Good luck!.

Oct 24, 2016 | Riccar Sewing Machines

2 Answers

How do I slow the speed of the machine down in order to quilt


use a smaller stitch. DO NOT PUT YOUR FOOT ON THE PEDAL SO HARD

Jun 28, 2015 | Sewing Machines

2 Answers

Company recomendated any table to use sewing machine 1507


if it is an ordinary sewing machine then any old table will do
kitchen, dining , bedside any table that you can sit at with your knees under it

Jun 14, 2015 | Sewing Machines

1 Answer

Problem with knee lift


are you sure it is in all the way and it is far enough away from your table so it is not catching on anything ?hope this helps

Oct 16, 2014 | Janome Memory Craft 9000 Computerized...

1 Answer

My machine gergles and then the needle starts to vivbrate back and forth without touching the pedal. It seems like it starts doing this after it is on for a while.


The foot/knee control is hanging in the 'on' position slightly. Look for an adjustment screw on the control, something that will let you set the pedal position. Try to adjust it so as to have a tiny dead spot at the beginning of the pedal travel, so that you actually have to move the pedal a little before the machine starts.

lp

Jan 15, 2011 | Singer Sewing Machines

1 Answer

Needle will not move up or down Froze up Machine is a 1950 's cabinet model machine, knee controled, Pfaff 230-260 automatic embroidery style. Have been using right along. I live by Atlantic...


please open the front plate of that machine there you can find the soft which is used to move needel up and down... put some oil initially and move it up and down so that it may works... may be due to rust you may get this problem... or please check internal garewheels to fix this problem

Oct 22, 2010 | PfaFF Sewing Machines

1 Answer

We have a very old Necchi Model BU Mira, that is integrated into a sewing table. It has a knee pressure speed control. There is no power cord, so I'm trying to figure out where to connect one. It appears...


The power wire (from the wall) connects to a block just under the motor where the on/off switch is. On my machine there is a brown block with the words Necchi italy on it. I unscrew two screw and there is a track were the power cord lays and leads bite in to the cord as the screws are retightened..... The blue wires from the transformer are on the "sewing machine side" of the transformer and power from the wall should not be attached there.

Dec 20, 2009 | Necchi Sewing Machines

1 Answer

Should there be a pedal with this machine (201K) purchased in 1953? What is the metal twisted bar for?


sounds like you have a cabinet model, yes this machine requires either a foot or knee control, the twisted metal is probably part of the knee control mechanism. order foot contrrol or knee control to fit the machine from linssewvac@hotmail.com

Sep 25, 2009 | Singer 132QRFB Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

kakima

Level 3 Expert

102366 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Kenmore Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...