Question about Televison & Video

1 Answer

The solution to the problem "Menu keeps popping in and out and the remote control working erratically" was to upgrade the software with bx23u-1.1.0.0-01461. How do you do this on a tv set?. I can download on a computer but I never heard of doing it on a computer. met.1944_11@netzero.com

Posted by on

  • met_1944_11 Nov 13, 2010

    Hey guys, I really appreciate the help. Now I have to learn and figure out what compressing the data means. They want 28.00 for a download program to do this. I wonder if the factory could just send me a preprogrammed usb stick. I'm not too savvy with computers. I will be asking for your help again..Mike

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

You Download the new firmware on the pc - download as in Save, not Run. Once the download is complete you disconnect the pc from the internet to minimize the possibility of corruption, plug in a USB memory stick, format it to FAT then move the downloaded firmware file to it. Make sure to Safely disconnect the USB memory stick before unplugging it from the pc.
Now plug the stick in the USB socket of your tv and start the update procedure: the exact procedure is explained in detail in the user manual - you must follow it to the letter or the tv will be rendered completely dead.

Posted on Nov 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Menu keeps popping up on screen on 52 r5wh73


This sounds like the front panel assembly(FPA) switches are acting up. What happens with this model is the FPA switches start to conduct just as if someone was pressing the buttons. This in effect locks up the system control or causes it to do erratic things.
The way to determine if the FPA is bad is to remove it by unplugging from set. This requires front panel disasembly. Note:The remote will still work with the FPA removed so the set can be tested.
Also double check that the remote is not the problem by removing it from the room or removing the batteries
Let me know if you need more help or info.

Dec 03, 2009 | RCA R52WH73 Projection Television

1 Answer

MENU KEEPS POPPING UP


It's a software problem with the TV. Go to the PHILIPS web site for downloading the latest software upgrade for your TV to fix the problem.
Lots of Philips TV are having the same problem. Philips support should provide the software for free.

Sep 09, 2009 | Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

Menus pops up


The menu button on the TV itself is bad and must be replaced ( or removed ). Alternatively the whole front button assembly can be disconnected. Just follow the wire back to the main chassis and unplug it.

Apr 09, 2009 | RCA P61927 61" Rear Projection Television

1 Answer

Menu


Is this a plasma TV ? If so remove the back cover of tv and unplug the cable that plugs into the IR board from the SSB that receives the signal from the remote. If it stops you panel is causing interference with the signal. If it doesn't your problem is in you SSB. you might see if there is a software upgrade offered by the producer of that TV.

May 03, 2008 | LG 42PC5D Television

1 Answer

2 remotes....same problem


try a firmware upgrade if a firmware upgrade doesnt work, try e-mailing them from www.logitech.com go to contact us and send an e-mail:

1. Log into the Logitech Harmony Remote Software on your computer
2. Click on the Downloads button at the top-right corner of your screen
3. Click on the Firmware button. Follow the onscreen instructions to upgrade the firmware on your Harmony remote
4. Once the firmware upgrade is complete, click on the Update Remote button
5. Test your remote.

Apr 04, 2008 | Logitech Harmony 880 LCD Remote Control

1 Answer

No picture for 3-4 minutes after start up


Roger,
Could be as simple as a software upgrade if the picture looks okay after it come on... What software version are you currently running?
SOFTWARE VERSION CHECK Step (1) Turn the TV ON. Step (2) Using the TV Remote, Select Antenna C. Step (3) Press the MENU button on the Remote. Step (4) Menu will appear
mmc-fig_7.gif
(Figure 1)
Step (5) Press the Cursor Down button and Highlight SETUP
mmc-fig_9.gif
(Figure 2)
Step (6) Press SELECT on the Remote Control. Setup Menu will appear
mmc-fig_10.gif
(Figure 3)
Step (7) Cursor Down and highlight UPGRADES
mmc-fig_11.gif
(Figure 4)
Step (8) Press the SELECT button on Remote Control. Upgrades Menu will appear
mmc-fig_8.gif
(Figure 5)
Step (9) Read the Software Version
software-version-check.gif (Figure 6)


Let me know!
Bill

Dec 12, 2007 | Hitachi 53SDX01B 53" Rear Projection...

3 Answers

Menu problems


An incredibly simple fix after a month of frustration. Get a blank USB flash drive. Go to Philips web-site. Go to your model #. Look at problems and you'll see the menu problem. You need new software. Follow directions and download software on to flash drive. Plug in to set and watch it load up. Instant fix. I'm a very non-geek and the whole process took <15 minutes.

Jun 30, 2007 | Philips 37PF7320A 37 in. HD-Ready LCD...

4 Answers

Menu options keeps popping up


Sounds like the button cluster has an issue...see if the menu button is stuck and if not, repair may be needed to disassemble the TV and have a look at the control section.

Jun 07, 2007 | Philips 42PF7320A 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

Cindy Wells

Level 3 Expert

5123 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...