Question about Raymarine Ray45VHF (53 Channels) 2-Way Radio

1 Answer

I have a Raymarine VHF marine radio but cannot get channel 37 - why not?

Posted by on

  • paulcarson Jun 17, 2008

    Thanks for your reply - a useful explanation but do you know how to change it?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

To my knowledge, Ch 37 (M1) is used by the UK Marinas and Yacht Clubs, however, the Raymarine Ray45VHF uses the US VHF Marine Radio Channels allocations/standard where there is no Ch 37 (actually no Chs 29-59).

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa

Posted on Jun 17, 2008

  • Louie  Role
    Louie Role Jun 17, 2008

    Hi again,

    It can not be changed, the limitation is built-into the firmware in compliance with the US FCC regulations, sorry.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ray 215 DSC VHF microphone


Hi Ralph,

Not to sure, but I take it that you are looking for a microphone for the Ray 215 DSC VHF Marine radio, is this correct?

If so, then you could do one of the following: go to your nearest 2-way radio repair shop, as they always have spare parts and could find a suitable match for your radio, search the web or log onto ebay, apart from that, I couldn't suggest anything more. I hope that I understood your query, as it was a little short on detail.

Wishing you well and best regards from the FixYa team.

Cheers,
Peter

Mar 15, 2013 | Raymarine Radio Communications

1 Answer

W do I turn off squelch control on a digitech DC-1065 marine radio hand held 5 Watt


Hi David,

Before I try to give advice, I need more info.

I possess a Digitech DC1065 UHF 80 Channel CB hand held, so there seems to be some confusion here.

I live near Perth, Western Australia.

Firstly, How many channels does your radio have?

If the answer is 80, then what you have is a UHF CB, not a marine band radio.

Marine band is VHF with 87 Channels, in Australia that is, and the default channel is always 16.

Digitech are an Australian radio manufacturer, so you'll get great backup service.

If your radio is not defaulting to Ch16, then I am right about it being a UHF CB.

Therefore, it is useless for VHF anything, let alone Marine band.

I'm almost 100% sure this is a UHF CB in your possession.

Try this to prove me right please.

Reply to me with your Country and nearest city, I'll then be able to find a solution for you real quick, though I believe I already have.

Looking forward to your response.

Regards,
Peter

Dec 21, 2012 | Motorola Walkie Talkie 2-Way Radio

1 Answer

Can this radio communicate with cb channels?


hello unfortunetly not as these radios are resonating on the marine band which is vhf high band cb band is resonating on 27mhz ,marine band 157mhz so will not work .

Apr 02, 2011 | Standard Horizon HX471S (824 Channels)...

2 Answers

Require Frequencies for CTCSS codes for Motorola GP 2000


check this link at page 21 or see below

CTCSS PRIVACY CODES FREQUENCY CHART (Hz) Code Freq. Code Freq. Code Freq. Code Freq. Code Freq. 1 67.0 9 91.5 17 118.8 25 156.7 33 210.7 2 71.9 10 94.8 18 123.0 26 162.2 34 218.1 3 74.4 11 97.4 19 127.3 27 167.9 35 225.7 4 77.0 12 100.0 20 131.8 28 173.8 36 233.6 5 79.7 13 103.5 21 136.5 29 179.9 37 241.8 6 82.5 14 107.2 22 141.3 30 186.2 38 250.3 7 85.4 15 110.9 23 146.2 31 192.8 8 88.5 16 114.8 24 151.4 32 203.5 * Channel 8,9 and 10 are designated Canadian Marine Frequencies * Channels 8~14 are low-power FRS license free channels Note: Privacy codes can be programmed for use on Channels 1~22 only

Feb 01, 2010 | Motorola GP300 Compatible 2 Way Radio...

1 Answer

How to reset mmsi number Raymarine 215


This secret code is for the Raytheon / Raymarine RAY 220 VHF. It may work on other Raytheon/Raymarine radios also.

Here you go:

With the Power OFF, Press and HOLD the FUNC, 16/9 and DSC keys while you power ON. Do not release the keys until you hear the audio BEEP which means your done. Then reprogam your NMSI number as per the manual. Pretty easy, hey?

Jan 28, 2010 | Raymarine Radio Communications

1 Answer

2 way radios


Your radio with model number M33GMC09C2AA is a GM300 made for Central Asia, Eastern Europe and Turkey. It is VHF 25 watt with 12.5 channel spacing. It will do frequencies between 146-174 MHz. It should be able to be "read out" by a Motorola dealer. If it has been in a boat, it most likely is programmed with Marine frequencies. If you have another marine radio you may be able to determine the frequency by process of elimination.

The wiring kit for power is readily available for around $18 ea. If your boat has a marine VHF antenna onboard, you will be able to attach the antenna to this radio. It takes a mini-PL connector.

Sep 14, 2008 | Motorola Radio Communications

1 Answer

VHF Radio


Check ther frequency tuning.
Sounds like it is off frequency.
Is the VSWR on the aerial Ok

Apr 01, 2008 | Raymarine Ray45VHF (53 Channels) 2-Way...

2 Answers

VHF transmit power


Hi, It is not typical but neither is there a problem with the radio. Transmit Power output is loosely dependent on the: 1. Frequency or channel you are transmitting. Normally, Marine Band VHF are calibrated for max (25 in your radio) at Ch16 or 156.800Mhz; 2. If the SWR of the antenna is not a flat 1.0, power tends to go down; 3. After some time, the TX side of the radio needs to be re-calibrated; 4. Power Supply - some radios will push max output only when powered with 13.8 and tends to go down when used with 12 volts. Hope this be of some help/idea. Post back should you need additional information. Good luck and kind regards.

Oct 04, 2007 | Garmin VHF-725 2-Way Radio

Not finding what you are looking for?
Raymarine Ray45VHF (53 Channels) 2-Way Radio Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Raymarine Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1640 Answers

Brad Brown

Level 3 Expert

13732 Answers

Mike Charette

Level 3 Expert

1769 Answers

Are you a Raymarine Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...