The machine can send/receive message, but there is a problem that keeps on coming back that says" Change drum soon". I place a new drum but the problem still comes back. What need to be done, now that i've done all that i can do.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Open up front op panel,mid door opens up tube sitting on top of drum unit is the toner cart! be care full can get messy!Pull lever on end of tube (will only go 1 way from original position)lift up and dispose of.pull white tape off of new cart install in drum push lever,open and close mid door a couple of times to cycle toner toner message will disappear.
Wait until the time, date and answering mode appear on the display. Then press the SELECT FUNCTION key.
Press the 7/COUNTER DISPLAY One-Touch key. The display will show DRUM COUNT.
Press to clear the image drum unit counter.
Press the SELECT FUNCTION key to finish.
Hi just a note to say first theing to check is that the phone line is connected at both ends to correct sockets and that the connector to teh fax unit is connected to the line socket and not the phone socket as this is the main cause of line errors.. Good luck you could also check to see of you need to dial 0 or 9 first before you dial your number as you ma y be on an exchange line.. also check the fax settings to see if you have set the line type correctly either pulse or tbx..