Question about HP Compaq nc6000 Notebook

1 Answer

Window xp will not start

Have problem logging onto computer. The XP Home
page will come up but then i get a black screen
and a message box titled "lsass.exe unable to locate
this component" comes up with message
inside "This application has failed to start
because OLEAUT.dll was not found.Reinstalling this
application may fix this problem" but i can carry
on because it freezes up.Things are very slow too.

Posted by on

  • kradevisser Jan 21, 2009

    I have an HP Pavilion ze2000 laptop and I have the same error message, however, I can't get past this. If I click ok to the error message, it just stays as a blank screen. I have tried to boot my computer in almost all the different modes and have had no success! I just got this computer and was given what I thought were the correct system recovery disks, but it says when I insert them that they are not for this laptop! HELP!!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 256 Answers

Hi

Problem is because of virus please install any good anti virus i.e. Eset nod 32, kaspersky or bitdefender....etc. after you install anti virus update it an scan your system problem will be solved.

Thanks

Posted on Jun 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gateway login


What sort of problem at log in >>?????
Forgot password ?
A "setup password" is a password that you must enter to log into a user account on your Gateway laptop.

This can be beneficial if you have a number of people using the same computer and don't want just anyone having access to your personal files.

But if you are the sole user of your Gateway laptop, then it can be more of a hindrance.
As all Gateway laptop computers run a version of the Windows operating system, you can remove the setup password by accessing the Windows Control Panel.

Click on the "Start" menu.


Select the option that reads "Control Panel." If you're running Windows Vista or Windows 7, this will have its own listing in the "Start" menu.

If you're running Windows 95, Windows 98, Windows ME or Windows XP, this will be found under the "Settings" sub menu.

Double click on the icon that reads "User Accounts."
Click on the name of the account that has a setup password that you want to remove.


Click on the "Remove my Password" option.
Enter your current password into the appropriately labeled box.


Click the "Remove Password" option.
Click "OK" to save your changes and exit the "User Accounts" utility.

The setup password will have been removed from your account, and you will be no longer prompted to enter it when you boot up your computer.
Unlock a Gateway Computer

Getting locked out of your Gateway computer can be frustrating, especially when you have school or work deadlines.

You can get locked out of your Gateway computer in cases where a password protected screensaver became corrupt, or if the you have set the default screensaver to use a screensaver that does not exist.

Gateway computers come with Microsoft Windows XP and 2000, including the professional versions of both. Knowing how to unlock your a Gateway computer can save you time and irritation.

Press the "Ctrl," "Alt" and "Delete" keys on your keyboard simultaneously to unlock your Gateway computer.


Type the last logged-on user's login information and click "OK" if you see a locked computer message along with "Only domain/username or an administrator can unlock this computer." Press the "Ctrl," "Alt" and "Delete" keys once again when you see the Unlock Computer window disappear. Log on as usual. Method 2

Shut down the locked Gateway computer by using the Microsoft Windows Resource Kit Shutdown tool.

This tool shuts down and restarts a Windows 2000- or NT 4.0-based Gateway computer.
Note the dialog box that comes up called System Shutdown.
Wait for the shutdown timer to run out and see the Welcome to Windows box displayed on the screen.
Press "Ctrl," "Alt" and "Delete," which unlocks the computer.
Log onto your Gateway computer normally.
Method 3: Backup, Modify and Restore the Registry

Click "Start" and "Run," then type in the command below in the field box exactly as printed:
%SystemRoot%\system32\restore\rstrui.exe
Click "Create a Restore Point," then click "Next" on the Welcome to System Restore page that appears.
Type any name for the restore point, then click "Create" on the Create a Restore Point page. Click "Close" after creating the restore point.

Perform this procedure before you make changes to the registry, just in case you make an error; otherwise, incorrect registry changes could create serious problems with your computer.
Click "Yes" if you receive a prompt to turn on System Restore at this point.
Clear the "Turn Off System Restore" check box by clicking on it, then click "OK," and repeat.
Click "Start," then type "regedt32.exe" (without the quotes) in search field box to modify the registry and unlock the computer. Press the "Enter" key on your keyboard.
Locate the scrnsave.exe value under the registry key below:
HKEY_USERS\.Default\Control Panel\Desktop
Click "String" on the Edit menu, type "logon.scr" (without the quotes), then click "OK."
Look for the ScreenSaverIsSecure value, then click "String" on the Edit menu, type "0," then click "OK."
Quit the Registry Editor
Click "Start" and "Run," then type the command below exactly as printed to restore the registry, then click "OK":
%SystemRoot%\System32\Restore\Rstrui.exe
Click "Restore My Computer to an Earlier Time" on the Welcome to System Restore page, then click "Next."

Note your computer may already be selected to restore to an earlier time--in this case, just click "Next."
Click the system checkpoint on the Select a Restore Point page. Click "Guided Help (Registry Backup)," then click "Next" on the "On This List Select the Restore Point" area.

Click "OK" if you see a System Restore message listing all the configuration changes it will make. Click "Next" when you come to the Confirm Restore Point Selection page.

System Restore will now restore the Windows XP configuration you had at an earlier time, and then it will restart your Gateway computer.

Log onto your computer as usual, and then click "OK" when you see the System Restore Confirmation page.

Nov 26, 2013 | PC Laptops

1 Answer

I have occasionally found the laptop (usually after being turned completely off) will not re-start, instead showing a "fan error" message. This, however, has been succeeded by a new, unsolvable...


Hi there,

To disable hibernation in windows xp:

-Right click on the desktop
-choose properties
-Click the screen saver tab
-Click the power settings button
-in the power options properties dialog box click the hibernate tab
-uncheck enable hibernation
-click OK

Hope this helps!

Apr 15, 2011 | PC Laptops

1 Answer

How to fix blue screen when trying to start computer


it will depend the error message. however; you can try this.

start you computer on safe mode. (i am telling you this will depend on error message)

to start you pc in safe mode hit F8 key simultaneously. when the windows pop up. with you down arrow in you keyboard select. SAFE MODE only. (if you go trought your log in screen you will be lucky) . if so
log in as normal. click yes for safe mode question

(THE NEXT ADVICE IS ONLY IF SYSTEM RESTORE IS ON)

i recomend you if you can log in onto your pc in safe mode to do a System reestore. because the blue screen could be a bad driver or bad update that you recently did.

so to make an system restore follow this. To use System Restore to restore Windows XP to a previous state, follow these steps:
  1. Log on to Windows as an administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore.
    Collapse this imageExpand this image 2425992.png
  3. On the Welcome to System Restore page, click to select the Restore my computer to an earlier time option, and then click Next.
    Collapse this imageExpand this image 2425656.png
  4. On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.
    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.2425657.png
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as an Administrator. Then click OK on the System Restore Restoration Complete
HOPE THIS HELP

Dec 17, 2010 | Samsung NC10-14GW Notebook

2 Answers

Error Code: 0x80070002


I think The default security provider in Windows XP has been changed loadTOCNode(2, 'workaround'); To reset the default security provider in Windows XP, delete the relevant registry keys in the Windows registry. To do this, follow these steps:
  1. Start the computer. Press the F8 key during startup to start the computer in Safe mode.
  2. Start Registry Editor (Regedt32.exe).
  3. Delete the following registry keys in the Windows registry: HKEY_USERS\.DEFAULT\Software\Microsoft\Cryptography\Providers HKEY_USERS\S-1-5-20\Software\Microsoft\Cryptography\Providers
  4. Quit Registry Editor.
  5. Restart the computer

Jun 02, 2010 | IBM ThinkPad A21m 2628 Notebook

1 Answer

When cp is bootin up, it goes to welcome screen an then is black screen, stays black except the mouse arrow is showin' it bwon't boot up no further,can sombody please help, Jack


Restart the Notebook and keep tapping the F8 key to access the Windows advanced options.

select Safemode.

Once you are in safemode, follow the below steps :

  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Complete page is displayed.
  7. Click OK.

Mar 14, 2010 | Compaq Presario 700 470024-192 Notebook

4 Answers

Password forgot


Well, I think you can rely on this password recovery tool to clear the password and reboot your computer without asking the password. The program is fully compatible with Windows 7, Vista and XP etc operation system, supporting both 32-bit and 64-bit. Let me know how it goes. Regards.

Aug 27, 2009 | PC Laptops

1 Answer

Dell Inspiron blank screen


You can restore your system in your safe mode.
To use System Restore to restore Windows XP to a previous state, follow these steps:
  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Complete page is displayed.
  7. Click OK.
If you successfully restored your computer to a previous state, and the computer is performing as it should be, you are finished.

Jun 11, 2009 | Dell Inspiron 9300 Notebook

1 Answer

Acer 1360 black screen cant get start menu


If you are getting a Blue screen repeatedly and you can't start up to windows in any custom setting ( from f8 start up menu ) one way to solve the problem is to Use the restore disc or windows installation cd or dvd to install windows into the computer or perform a repair installation if a windows already exists on the computer and the setup can find it.

how to perform a repair installation

this is for xp, but its similar on 2000 and on vista.

insert your Windows XP Setup CD, and restart your computer.

1.When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD.

if not then the computer is not set to start up from a cd, you can either enter the setup / bios to change that setting OR right when you power up the computer look at the screen it will say what button to press in order to enter boot menu or bios, it will very likely be button F12 or similar, it should say on the screen when you power on.

if it doesn't, then you need to go into the bios and change the boot order so that the computer starts from the CD first.

after that you should be able to start from the cd and install the OS (Operating system, eg.Windows)

here's some info on how to work the bios: http://www.whitecanyon.com/how-to-change-boot-order.php


Repeat step 1 when you have changed the boot order.

2.Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen.

3.Do not choose the option to press R to use the Recovery Console.

4.In the Windows XP Licensing Agreement, press F8 to agree to the license agreement.

5.Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

6.Follow the instructions on the screen to complete Setup.

7.Ones windows is working you will need the drivers for your computer, they are at the makers website, for hp and compaq. www.hp.com for acer http://support.acer-euro.com/drivers/downloads.html for all other brands go to google and write Brand drivers. Should get you to the right place. Dell is most likely www.dell.com and so on.

May 18, 2009 | Acer Aspire 1360 Notebook

2 Answers

Cannot start up


Do you have a copy of your OS disk:

Try This:

insert your Windows XP Setup CD, and restart your computer. 1.
When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD.
2.
Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen.
3.
Do not choose the option to press R to use the Recovery Console.
4.
In the Windows XP Licensing Agreement, press F8 to agree to the license agreement.
5.
Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
6.
Follow the instructions on the screen to complete Setup.

Feb 16, 2009 | Toshiba Satellite A35-S159 Notebook

1 Answer

Dell Won't Log In


If you did not buy the Xp then you may have an illegal copy so your computer is not operating properly. I suggest getting a legal copy of XP

Nov 25, 2008 | PC Laptops

Not finding what you are looking for?
HP Compaq nc6000 Notebook Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PC Laptops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a HP PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...