Question about Kodak EasyShare LS443 Digital Camera

1 Answer

Error code e45 - Kodak EasyShare LS443 Digital Camera

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on Dec 14, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
lock123
  • 6831 Answers

SOURCE: error codes e45

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on Dec 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not a camera question E45 on tv screen switch on tv it says 'E45 Service not Aurhorised' won't let me in to any channels


E45 means Service not authorized indicating that an attempt is made to tune to a transport stream which is blocked. In this case, remove the smartcard, rescan all networks before reinserting the smartcard. Also check that you are using the current version of the software on your decoder. DSTV ERROR CODES MEANING AND SOLUTIONS

Feb 13, 2017 | Cameras

1 Answer

Error code e45


E45 error code is a main display (control) board communication error. Only way to repair, is to replace the main control board.

Nov 10, 2013 | Electrolux Washing Machines

1 Answer

E45 error on frigidare affinity washer


Hello efrendepaz - That is correct, typically error code E45 indicates that the washer has detected a Main Control Board issue. The control board will need replacing and regrettably this is not simple DIY job. I would strongly recommend connecting with a professional to move forward accurately.

Mar 13, 2013 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

When i swich on it says camera error ''E45 see users guide.


E45 error code indicates the lens of your camera is already defectived. You need to contact Kodak at 1 800 235 6325 ext 12. Your camera needs repair

Feb 03, 2010 | Kodak EasyShare Z700 Digital Camera

1 Answer

Easyshare Z612 with an error code of #e45


Itøs a lends error. There is not much else to do than to send it in for repair or go for a trade up.

OoW repair for this model w. this fault: 88,07 Pounds.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 14, 2009 | Kodak EasyShare One Digital Camera

1 Answer

My camera kodak easy share v530 has error e45 the zoom doesnt go in when i turn it off. when i turn it on it says error e45


E45 means it has a lens error., the gear of the lens is already defective you need to call precision camera for repair toll free 1 800 665 6515

Nov 01, 2009 | Cameras

2 Answers

ERROR CODE E45 pops up on start up. I have been


Hi,

E45 means the lens is jammed, tip so lens is facing down and shake to see if you can dislodge. Look between the lens and the body and see if you can see any dirt or sand..

As you have identified, the cost of repair is more than the value of the camera so you have nothing to lose from here...

Try and dislodge the lens, smack the camera into your hand to try and free up lens, wiggle the lens to try and free it up.

If no luck dismantle the camera and see if you can free up...
Unless the last option would be to throw it and purchase a new camera.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Oct 23, 2009 | Kodak EasyShare V705 Digital Camera

3 Answers

Error code E45


can u help me with my camera. its a kodak LS 443. I keep getting a saying that is has a error # E45. the lens are stuck. Can u tell me wat do do or give me advice please

Nov 20, 2007 | Kodak EasyShare LS443 Digital Camera

Not finding what you are looking for?
Kodak EasyShare LS443 Digital Camera Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...