Question about Bosch MUM6630 Universal Series Stand Mixer

2 Answers

HI, have a bosh universal mixer,very old, works as new,but from mal use the botton part of blender was forced and it neds to be replaced.the tag in the bottom is skratched,15 years old, E-NR MUM???2/03 FD7810 600 WATT TYP UM60ST2 the inside of the cup is aluminium and the machine looks as the mum6630 plase advise. thank you very much

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need manual for BOSCH um60st2

Posted on Aug 03, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello, excuse me I have a question if you can only have the cup? thanks bye

Posted on Feb 07, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drive Shaft stopped kneading dough


To give the mixer strength it has planetary gears. Something may be wrong in the gear section

Nov 26, 2013 | Bosch 800-watt Universal Plus Mixer with...

2 Answers

My blade assembly broke. Can I get a new one for my Maxi 4000


replacement can be found on amazon, take a look here: Amazon com Vitamix blade assembly. I hope this was helpful. Cheers

Jan 16, 2013 | Vitamix Vita Mix Maxi 4000 Commercial...

2 Answers

Need replacement beaters for Rival 12 speed stand mixer. I am unable to find any 89-attachments for this mixer as I have misplaced the beaters that came with the unit. I've looked everywhere. Are...


I cant find any information online at all about buying attachments for my new Rival 12 Speed Blender!! Does anyone know how I would find out how I could go about ordering new parts for it?

Jul 01, 2011 | Rival Food Mixers

1 Answer

I seem to have lost the instruction manual for my mixer. I would like to use the immersion blender, but I can't figure out how to attach it to the mixer body. The shaft on the blender is too short to...


Hi
The blender does not attach to any of the two holes for the whisks.
You need to push back the sliding cover in the center, bottom part between and behind where the whiskers attach. This will uncover a third attachment possibility, where you insert the blender and twist it a quarter turn into place.

Dec 13, 2010 | Braun M880 MultiMix Hand Mixer

1 Answer

Noisy, high pitched whirring MUM6622UC/01 Bosch Universal Mixer


My wife's bosch mixer had a similar problem but it was a very loud grating problem. I talked to the bosch dealer in Utah, sorry, I've forgotten which one-- the one that does the repair. This is typically what happens: the seal on the blender wears out, which results in fluids from the blender dripping into the motor, onto the upper motor bearing. So, the upper bearing corrodes and is what is causing the bearing failure and the loud noise (needed hearing protection to operate it). I was lamenting the cost and time it would take to ship the mixer both directions (not actually that much compared to the price of the mixer), and he said he would sell me the bearing and the bottom replacement part of the blender that was leaking. So, I did the repair myself, but it took awhile, and I had to build a puller for the bearing to get it off the shaft, modifying a harbor freight gear puller. But it now is back to new. So, it was a success for me, but i would recommend anyone who isn't very mechanical to just send it off to Utah (again, I forgot the place, I think they talk about the shop in one of the other posts), and you will have a better than new machine.

Nov 08, 2009 | Bosch 700 Watts MUM6622 Universal Series...

1 Answer

K-tec Kitchen Champ 2000 manual information needed


Type into the search box above. Blendtec and it will return with nimerouus appliance sites. Some sites carry all sorts of brands and parts including manuals _Good Luck_ Ned

Oct 31, 2009 | Food Mixers

1 Answer

Can't get the drive coupling off my Bosch Universal to replace it


I have had my Bosch Universal Mixer with the Blender and Food Processor Attachments since 2005, and I've loved it since the day I got it... that is, until the blender broke while my son was crushing ice to make slushies...

I figured out the "drive coupler" was stripped and needed replacing, but I couldn't figure out how to take apart the "blade assembly" which includes the "drive coupler" part...

My retailer, Pleasant Hill Grain, sent me the following email:

"I am not aware of any printed instructions for removing the old coupling and
replacing with the new. We recommend holding on to the blades with 1 hand and a
towel and using a needle nose pliers to unscrew the old coupling. You would put
the new coupling on in the same manner.
If these instructions do not work, I would suggest contacting the Service
Dept at Kitchen Resources in Utah. Their phone is 800-692-6724."

I still couldn't figure out how to take apart the blade assembly, so I did end up calling the distributor, Kitchen Resources...

Dave, the tech @ Kitchen Resources, answered my call on the first ring...

Once I explained my problem, he started giving me the same instructions Pleasant Hill Grain gave
me... I explained to him that holding the blades tightly wasn't working for me.

As it turned out, holding the blades did not secure the drive shaft because
the drive shaft was broken off INSIDE the blade assembly - which is why I could
not unscrew the old drive coupling part.

Dave's next question revealed the true issue at hand... my Blender Attachment has the blade assembly made of plastic - they switched to plastic
in 2005 because the metal assembly turned black in dishwashers.

Bosch just recently went back to using metal for this part - apparently the
plastic blade assembly didn't hold up.

Kitchen Resources - the U.S. Bosch Distributor - is sending me a new blade
assembly - no charge, he said it's covered under warranty. Woo Hoo!

Best of all, I hadn't yet purchased the replacement drive coupling part, because
I wanted to know how to go about replacing the part before ordering a new part.

With shipping this part would have been a $50+ repair - you have to love
customer service of that caliber!

[Aside: You really don't need to ever put this part in the dishwasher - wash
the inside with by putting hot water and perhaps a little dish detergent inside
the blender and turning it on - rinse the outside under the sink... no
dishwasher needed! ]

Mar 23, 2009 | Bosch MUM6610 Universal Series Stand Mixer

2 Answers

Need to replace cord on vintage Sunbeam Mixmaster Junior


For mixmaster junior, but should be relevent to many old sunbeams:

That's not the power cord going to the speed switch. You don't need to get those screws off.
To replace the cord:
Cut the old power cord near where it enters the blender.
remove the two front screws, pull off front housing.
remove 1/4" nuts found in recesses of exposed front plate.
pull speed handle out far enough to get a screwdriver under exposed front plate, and pry gently. It'll come off as it's a friction fit.
cooling fan blade is now visible, you need to remove it.
pry up gently on the teeth attaching it to the motor shaft.
Work your way around the 4 sets of teeth, it'll come off. Don't lose the two washers.
unscrew the electrical contacts.
take off the speednuts holding the brush assembly in place.
gently pull up on the brush assembly with a needle nose, until it comes out.
now remove the screws holding the motor coils in place. They're the same ones the speednuts attached to, and have hex heads you can get at with a needlenose.
once those are out, pull on the motor coils gentle, and wiggle them out of the housing.
You'll see the stub of the old power cord at the back of it.
Get a round replacement wire of the right diameter, thread it through the cord hole in the blender, and connect it up to the coils.
-I had to drill the power cord hole 1/16" larger than it was to get a modern cord to fit through it.
On the stub of the old cord, you'll see a metal ring which serves to anchor the cord in blender body. remove it (screwdriver + needlenose and pry), and attach to new cord at the righ position.
Put everything back together, being careful not to bust the carbon brushes.
Congrats, you now have a functional blender with a cord that won't try to electrocute you.

Mar 10, 2009 | Sunbeam Food Mixers

1 Answer

Kenwood chef excel attaching blender


http://www.kitchenmanuals.com/manuals/mfg/kenwood/km300_km400_km600_km800.html

hers the manaul for u rate me as fix ya ok its a pdf file also thx nick use adobe reader to view it 43 pages thx agian for using fix ya

Feb 04, 2008 | Kenwood KM400 / KM410 Chef Classic Stand...

1 Answer

Bosch mixer doesn't run!


It sounds like the switch to me.mixers last awhile as long as there not overloaded.The brushes in the motor also go bad but i think the switch is your problem.Goto home depot/lowes and take the switch with you,dont forget to mark the wires.If they cant help you goto graingers (its a electrical/plumbing wharehouse).let me know,you can use an universal switch if the one you cant find isnt availiable.

Dec 10, 2007 | Bosch MUM6612 Universal Series Mixer

Not finding what you are looking for?
Bosch MUM6630 Universal Series Stand Mixer Logo

Related Topics:

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Food Mixers Experts

Paul Bade

Level 3 Expert

1516 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

The Knight
The Knight

Level 3 Expert

73611 Answers

Are you a Bosch Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...