Question about Canon PowerShot A95 Digital Camera

1 Answer

Screen view is cloudy & has lines through it - download also looks like that so picture isn't printable

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, contact Canon support for your country to see if they'll still honor the advisory (some still will, especially if you stress you knowledge that this is a known defect of the camera). They may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. Please see this link for more info.

Affected cameras with this problem include: A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S400, S410, S500, SD100, SD110, IXUS V2/V3/300/400/430/500/II/IIs, IXY Digital 200a/300a/320/400/450/500/30/30a

Posted on Nov 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My crt acer ac512 monitar only centre line view,c"not full view why?


there are several reasons why picture of crt monitors did not display good picture. if your monitor had horizontal line at the center of the screen?...the faulty is in the vertical deflection, check the vertical oscillator also the fusible resistors & capacitors around that section. if there had vertical line at the center of the screen?..check the horizontal deflection, horizontal output transistor also check the YOKE.

Jul 31, 2014 | Acer Computers & Internet

1 Answer

Honda schematics


printable? all that is seen on your screen , is printable. for sure.
the car has like 100 pages on topic.
buy the FSM , or use alldata dot come.
or tell what part you are working and we can post 1 page.
wiring of what, the car has Very complex wiring, endless.. really...
if you look in the book, its HUGE.
lighting
drive line, huge.
brakes ABS.
transmission, controls.
Audio.
other options, cruise, lots.
automatic inside dimming mirror, OMG, really>?
charging
starting

buy the fsm
if in usa , buckup $15 for alldata.com and look, and download it and print it, like us.

Jul 18, 2014 | Honda Accord Cars & Trucks

1 Answer

Sanyo VPC-S770 view screen & pictures have a rosey tint


There is only one thing I can think of. If it is not this perhaps your camera is defect.
Your camera has a White balance setting. You can put it in Auto, Incand. Daylight, cloudy and Manual.
Check if it is in something other than Auto. If so, put it in Auto, till you think you can improve the colours by putting it in a special setting.

Jan 29, 2014 | Sanyo VPC Cameras

1 Answer

The picture is not clear anymore. It seems as though the picture has gotten gradually darker. We still use the television, it is just not clear enough. When watching nighttime scenes, we cannot see mu


Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Below are more details for both items. Also, complete repair kits with instructions and repair support are avail from site such as www.TvRepairKits.com

Common Problem #1) Convergence has gone out

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. The power light will blink. TV may also make a chirping noise.
Here are some pics of convergence problems.


7859b01.jpg

e87380c.jpg
69189a5.pngSOLUTION #1

What you will need to do is convergence. You can get a repair kit from TvRepairKits.com . It includes replacement parts,step by step instructions, support, etc.

Common Problem #2) CRT Fluid is Cloudy

Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the coolant in the blue and green tubes will become cloudy and cause the screen to look dull, red/orange, etc. You may even see halos around images.

Picture of a set that needs the fluid changed.

578ba6c.jpg
TV set after fluid change

65af323.jpg

69189a5.pngSOLUTION

What you will need to do is replace the coolant and clean the crt. You can get a repair kit from TvRepairKits.com . It includes replacement coolant,step by step instructions, support, etc.

Jan 21, 2013 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

THE PICTURE ON MY TV IS SHOWING A YELLOW SHADOW ON ON SIDE MORE & A BLUE SHADOW ON THE OTHER. IS THIS A BULB PROBLEM?


TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are more details and solutions for both.

Common Problem #1) Convergence has gone out

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some pics of convergence problems.


7859b01.jpg

e87380c.jpg

Common Problem #2) CRT Fluid is Cloudy

Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the coolant in the blue and green tubes will become cloudy and cause the screen to look dull, red/orange, etc. You may even see halos around images.

Picture of a set that needs the fluid changed.

578ba6c.jpg
TV set after fluid change

65af323.jpg

69189a5.pngSOLUTION

You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 28, 2011 | Panasonic PT-47WX49 47" Rear Projection...

3 Answers

The color is separating


Tv have a problems known as a convergence problems,it dead.The colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.The tv convergence board must have these parts replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Jan 06, 2011 | Sony KP-51WS510 51" Rear Projection...

1 Answer

I have a Dell desktop computer & monitor. Tonight, I was checking the status of an order being shipped by UPS. When the UPS tracker can't find an order, an error message is overlaid on the page - so...


no, i do not think it is dying... but i think it is infeced with some nasty... for future reference, you need to state what operating system and what model of the computer, dell is making over 500 models over the years, telepathy do not work very well... i assume you have some variant of windows

re-start computer in safe mode with networking enabled, download any on line virus checker and run it... it can take some hours before it finishes. follow that procedure.

1. switch off computer - leave for at least 20sec
2. switch on and repeatedly click f8, you will have selelction screen
3. select safe mode with networking
4. log as an administrator, is screen still cloudy? was screen cloudy during boot up? if it is cloudy all the time, there maybe something wrong with videocard or with monitor. let assume that it is clear:
5. go to http://www.eset.com/online-scanner and download they free scanner
6. install and run the scanner, follow instructions
7. download and run ccleaner, remove all junk and clean your startup as well as registry.
8. repeat step 1 to 4
9. go to http://www.malwarebytes.org/mbam.php and download they free version, install and run it, follow instructions
10. repeat step 1 to 4
11. go to http://www.microsoft.com/security/malwareremove/default.aspx and download and run they malware scanner.
12. switch off computer and wait 20 sec, start and use normally.

if this is not a software problem, then follow this procedure:
1. borrow known working monitor and check quality of the display, is cloudy?
2. connect your monitor to another computer, is cloudy?
3. if yes is in first instance, your computer is responcible, if yes is in second instance, your monitor is responcible.

as you did not stated what model and operating system, i cannot provide more detailed advice. advice given is correct for virtually all computers with similar problem in existence...

if you find my help useful, please do not hesitate to vote for me.

Jul 31, 2010 | Computers & Internet

1 Answer

Red and fuzzy picture can you help on my 50 inch phillips magnavox projection TV


This is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
The other common problem is cloudy lens fluid. After many years the coolant in the blue and green lens will become cloudy and cause the screen to look dull, red/orange, bright white, etc. You may even see halos around video.
You can see some example photos and find a solution here on Fixya.
http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Nov 25, 2009 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

The tv picture looks like should be wachting it whith 3d glasse


This is a very common failure on Projection TV sets. Its called a convergence failure. Here are some common symptoms.
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
The other common problem is cloudy lens fluid. After many years the coolant in the blue and green lens will become cloudy and cause the screen to look dull, red/orange, bright white, etc. You may even see halos around objects on the screen.

You can see some example photos and find a solution here on Fixya.

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Nov 15, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Cloudy white pictures


Cloudy images are usually a result of ccd gone bad. Try power reset, maybe it helps..

Jan 12, 2008 | Fuji FinePix S7000 Digital Camera

Not finding what you are looking for?
Canon PowerShot A95 Digital Camera Logo

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...