Question about Foundry Networks Foundry EdgeIron 2402CF (EIF2402CF) Networking Switch

2 Answers

We have foundry edgeiron 2402cf switch and forget my username and password , what i shoud be made ?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers

Hi,

Please follow the steps below to reset the password

1. Power Off and Power ON the switch
2. Immediately enter 'b' to go to the boot monitor mode
3. Do not Enter any password in boot monitor mode.
4. Enter boot system flash primary
5. You will be getting a prompt as 'FastIron>'

Please set the new password as below:

FastIron>enable
FastIron# configure terminal
FastIron(config)# enable super-user-password admin
FastIron(config)# write memory


Your new password is set now as 'admin'

Best Regards

Posted on Nov 17, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How / where do you enter 'b'? Is that in hyperterminal. I cant get this to work or get any response from the Fastiron Edge 2402's I have but the Edgeiron 2402's are fine
Settings are 9600, 8date, 1 stop, no parity

Posted on Dec 10, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset password netgear


From your computer type 192.168.1.1 in the address bar and hit enter
a windwo will come up asking for your user name and password. It shoud be Username: admin Pw: password
if that isnt it username Admin password: Leave blank
This will bring yo to the router so you may change your router password


t

Mar 05, 2014 | Computers & Internet

1 Answer

Sir i have forget my admin password i want to recover it now tell me the procedure


Hi,
Default admin username: smcadmin Default admin password: smcadmin

This is the default username and password for your SMC 24-Port Ethernet Switch to log into the setup page. Also by default the ipaddress to log into the setup page is http://192.168.2.1

Thanks in Advance!

With Regards,
Prema.

Jan 06, 2011 | SMC (SMC6128L2) 24-Port Ethernet Switch

2 Answers

Recover Password


there are two ways ..try them

first :
In order to set a new password do the following:

Make sure you have a console connection to the Foundry device.


Reset the device using the reset button in front or remove and then reinsert the power cable.


Immediately enter b to go to the boot monitor mode at the time of boot up.


Enter no password in boot monitor mode.


Enter boot system flash primary (or secondary).


At the prompt enter the following commands:

FastIron>enable
FastIron# configure terminal
FastIron(config)# enable super-user-password test
FastIron(config)# write memory
Your new password is now "test".

second... only try if first doesnt work
Set the switch to its default configuration. Make a direct connection to the switch’s console port and power cycle the switch. Immediately after powering on, press <Ctrl><u> to access the system file menu. ]Select <D> to delete all user-defined configuration files. Press <Q> to boot the switch.

hope this solves your problem

Aug 08, 2009 | Foundry Networks Foundry EdgeIron 2402CF...

2 Answers

Don't know the username to "http://192.168.0.1" router Level One.


If you have never changed this from default then the user name will be "admin" & the password will be "password" or "admin. If you google the default password for Your router model then that shoud find it if this does not work. Don't forget to rate me if this works for you.

Jul 06, 2009 | Levelone CP Technologies LevelOne FBR-4000...

1 Answer

Hub and switch difrance


Switches are smarter than hubs.
Lets say you have a switch with 16 ports, your computer is connected to port 2 and you are browsing the internet. You make a page request and when the reply comes back it hits the switch and the switch forwards the information to port 2.
This does not happen with a hub, the hub does not know you are on port 2, it sends the information to every port, in this case all 16 ports. In a low traffic environment a hub can be ok but it can cause a lot of unnecessary traffic on your network and slow it down.
If you have a choice pick a switch over a hub, there is not that much of a price difference these days.

Sep 26, 2008 | Foundry Networks EdgeIron (EIF48GS)...

1 Answer

3COM network switch access problem


You Could check to see if it has a passowrd and username as 3com or user as username or password thats wat mine is and i forget my pass

Aug 04, 2008 | 3Com SuperStack 3 4924 Networking Switch

1 Answer

Edgeiron 48gs


The RJ45 pin color configuration is mismatching

Oct 17, 2007 | Foundry Networks EdgeIron (EIF48GS)...

Not finding what you are looking for?
Foundry Networks Foundry EdgeIron 2402CF (EIF2402CF) Networking Switch Logo

Related Topics:

1,365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Foundry Networks Computers & Internet Experts

John Hong
John Hong

Level 3 Expert

787 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

586 Answers

Jimmy Hernandez
Jimmy Hernandez

Level 2 Expert

49 Answers

Are you a Foundry Networks Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...