Question about Saeco VIA Venezia
I have a starbucks barista type sin006. it blows the gfi when turned on. When unpluging the heating element it will not blow fuses and the pump will work. No resistance throught the element contacts but about 10,000 ohms from element contact to boiler tank. Do I have a shorted out element?
You sure have short on the heater element.If you take the wire off from the heater and everything ios working is a short.Also take one wire from the heater and test with a multimeter the heater pin(the one go inside the boiler) and the other one on Ground.If show continuity the heater is in short
Good Luck and don`t forget to Rate your Experience
Posted on Jun 21, 2008
Yes I would say so. - Wel done in finding it.
Unusual for it to go this way - usually just goes open circuit.
Hope this helps you. If so, please take a moment to rate as Fixya!
(For some strange reason My account is playing up, and giving answers as a guest, But it's me - Richie_asg1. )
Posted on Jun 17, 2008
Tips for a great answer:
Jul 14, 2014 | Starbucks Barista Quattro Coffee Maker
Jul 29, 2011 | Starbucks Saeco Italia Digital Barista...
May 10, 2010 | Starbucks Barista Quattro Coffee Maker
Mar 17, 2009 | Starbucks Barista Utopia
Jan 11, 2009 | Estro Barista Athena
Nov 10, 2008 | Starbucks Coffee Makers & Espresso...
Nov 07, 2008 | Starbucks Saeco Italia Digital Barista...
Oct 31, 2007 | Starbucks Barista Quattro Coffee Maker
May 22, 2015 | Saeco VIA Venezia
498 people viewed this question
Usually answered in minutes!