Question about JVC AV-56WP74 56" Rear Projection HDTV-Ready Television

2 Answers

My TV Hi There, When I turn on my TV, most of the time I see that half of the screen is green and other half is blue. I have to turn on & off the TV 50 to 100 times and play with "split" & "freeze" that cause suddenly the picture appear. I forgot to say that this green and blue on TV is shaky and some times it becomes some lines in different color patterns ( parallel lines ). When the picture comes it is excellent in quality. The problem is each time I want to turn on the TV, I have to sit down for 30 to 60 minutes and play with remote, and if I am lucky the pictures come on then. Please help me with this issue. Please tell me what is going on and what I have to do?????? Thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks Easyab,

I am far from you, I am in Chicago.
I tought that might not be the conververgence. because when I want to watch TV, I turn on the TV and I do Auto Convergen once or twice. then I press Freeze or Split on my remote back and forth, and suddenly the picture comes in great quality ??????
I am a Canadian medical doctor ( recently moved here ) and I don't know much about TV. I accept what you say and I buy your words. I am very good with repairing things and I hope I will learn to repair this TV too without any damage to it. I asked some body to come and repair it. He asked me for $300 that is alot for me untill I begin my job.
Could you please tell me the cost of repair?
I don't know if I can ask you more questions when I go through those steps you mentioned????
my direct email is: drsnour@yahoo.com
Sincerely
Sam

Posted on Jun 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 132 Answers

Hey Zerp,

You need Convergence IC's. It is more difficult than batteries on a remote.

You access the convergence board through the inspection plate that is located behind the front speaker grill.

You remove the board, determine if any resistors are burnt, replace any burnt or out of tolerance resistors, replace 1 or 2 IC's and re-install the board.

Now you have to adjust it to look like new.

If you haven’t misadjusted it too badly, do the auto focus and it is back to where it was before IC failed. If it is still misadjusted badly, then resistors may be wrong value or open.

If you live around Calgary, try me instead:

http://calgaryconvergencerepair.weebly.com/convergence-explanation.html

Or try the find a repairperson part of this website, maybe you will be lucky and someone is listed nearby.

Most rookies doing this job will cause damage and not be successful, and pay double for someone to fix their mess or end up scrapping the TV.


easyab

Posted on Jun 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. My Sony Videoscope XBR's Convergence Allignment


I happen to share this same problem. The alignment of the gridlines on the standard convergence panel are completely abnormal, and if I attempt to auto-adjust the TV, it flashes different colors on the sides of the screen , and then turns off the convergence settings.

Feb 01, 2010 | Sony Projection Televisions

1 Answer

Hi I have a rca hd52w59. the top half of the


Projection sets have two very common problems.

The first common problem is convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped or bowed
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 24, 2010 | RCA HD52W59 HDTV Projection Television

2 Answers

MOVED TV NOW NO PIC JUST RED BLUE GREEN ON TOP HALF OF SCREEN


Try re-soldering convergence IC pins first, they might get loose when you moved the TV.

May 27, 2009 | Panasonic PT-61HX40 61" Rear Projection...

1 Answer

My TV Screen turns green or blue after 10 minutes of the tv on


You have a chip that is overheating due to heatsink coumpound being dried up. You need to find that chip and heatsink and apply new compound to both parts.

Mar 18, 2009 | Mitsubishi WD-73827 73" HDTV DLP TV

2 Answers

I have a problem with my picture


If convergence is intermittent, then most likely poor solder connection on convergence board. This is not a simple repair. Accessing the board, removing it, identifying the poor connections and soldering, then re-installing is delicate work.

If you are in Calgary, call me.

Easyab

Jun 10, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer

Panasonic PT -47WXC43G 42 inch TV


replace the convergence amp ICs both of them. They cost about 15.00 each

Mar 09, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Sony TV Screen


Is you model listed below?

Sony wega blue dot or star pattern on screen
http://esupport.sony.com/perl/news-item.pl?news_id=206&mdl=KDF42WE655
Models: KDF-42WE655, KDF-50WE655, KDF-55WF655, KDF-60WF655, KDF-55XS955, KDF-60XS955, KF-42WE620, and KF-50WE620

Jan 15, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

2 Answers

Sony KP-51WS500


does it have blue video image?

Sep 29, 2007 | Sony KP-51WS500 51" Rear Projection...

Not finding what you are looking for?
JVC AV-56WP74 56" Rear Projection HDTV-Ready Television Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Projection Televisions Experts

easy alberta
easy alberta

Level 2 Expert

132 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a JVC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...