Question about Acer AL1716 F Monitor

1 Answer

My acer AL1716 monitor has some sort of problem where when i turn on the monitor, everything shows up for 1 second and it turns to a black screen. Please help.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

It may be because it has bad DC filter caps, bad transformers, etc. Please read my guide and read about bad caps and look at the pictures of failed ACER and other monitors albums.
If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Service manuals: http://elektrotanya.com/?q=showresult&megnev=ACER&megnev2=AL1716&kategoria=monitor&kat2=schematics

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://en.wikipedia.org/wiki/Capacitor_plague
Learn about bad caps: Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Posted on Nov 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My acer AL1716 monitor has some sort of problem where when i turn on the monitor, everything shows up for 1 second and it turns to a black screen. Please help


If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Replacement board: http://www.lcdrepair.us

Nov 10, 2010 | Acer AL1716 F Monitor

3 Answers

What is the screen resolution for acer al1716 monitor


Hold the power button down for at least 10 seconds till the light goes out, then turn it on and the problem is gone.

May 16, 2010 | Acer AL1716 17" LCD Monitor

1 Answer

I have a acer monitor model #AL1716, the screen goes black and then the acer name comes up. This happens frequently and not in a pattern . I have checked the plugs to be sure they are connected. Please...


1. Does this happen well you are not actively using your computer?
If so In control panel >> Power Options >> the default is "turn my moniter off after 20 min" you can adjust there.

Oct 14, 2009 | Acer Computers & Internet

3 Answers

Acer al1716 dont work


When the LCD monitor display flickers and or has a black screen then the fault is usually a faulty inverter or the CCFL lamp. When you look at the screen at a sharp angle and you see a dim image then it is a backlight problem and it is caused by a faulty inverter or a CCFL lamp.
Check out LCD Parts for parts, service, and DIY info. Use this link to their WEB site :-
www.lcdparts.net

Sep 03, 2009 | Acer AL1716 17" LCD Monitor

2 Answers

My monitor is new .. the screen stays black and the power button flashes green ... how do i fix this ????


Hi!
I have acer al1716 LCD and whan the computer is turn on, the lcd led turn green but the lcd is showing black, what i can do?

thank you!

Apr 16, 2009 | Acer AL1716 17" LCD Monitor

1 Answer

LCD Monitor wount turn on Black screen


my Acer AL1716 monitor will not come on after pressing the on button and no green light.

Aug 25, 2008 | Acer AL1716B 17" LCD Monitor

1 Answer

Blink problem


hi there, try to install direct x software, a driver software for video acceleration. ty

Feb 13, 2008 | Acer AL1716 17" LCD Monitor

1 Answer

Acer AL1716 monitor flickers


i Have the same problem, this screen is used on the spare computer we have in a loft conversion and the room does get rather cold, Warming the screen up with a fan heater for a couple of minutes gets rid of the problem. When the fault occurs the buttons on the front to adjust the picture quality don't work they just turn off the monitor.

Dec 08, 2007 | Acer AL1716 17" LCD Monitor

1 Answer

Flickers and shows acer logo


Perform a system recovery:

2 ways:

1. If in Windows - Start - Programs - Acer empowering technology - Acer E-recovery management -
click on Restore at bottom then "Restore to factory default settings"

2. Alt/F10 during boot right after Acer splash screeen on startup
http://us.acer.com/public/page11.do?sp=page74&UserCtxParam=0&GroupCtxParam=0&dctx1=25&CountryISOCtxParam=US&LanguageISOCtxParam=en&ctx3=-1&ctx4=United+States&crc=790373818

Oct 26, 2007 | Acer AL1716 17" LCD Monitor

Not finding what you are looking for?
Acer AL1716 F Monitor Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

633 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...