Question about Maytag Washing Machines

2 Answers

Matag epic z mhwz600twoo is flashing f-25 - Maytag Washing Machines

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

F25 is a DRIVE MOTOR TACHOMETER ERROR

If the control is unable to properly detect motor speed, the machine shuts down. If a failure occurs during high-speed spin, the door unlocks after 3 Minutes.

Possible Causes/Procedure

1. Verify the shipping system including shipping bolts, spacers and the power cord are removed.
2. Unplug washer or disconnect power.
3. Check drive motor tachometer resistance. It should be approx. 115 ohms.
4. Check wire harness connections between the drive motor and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU).
5. Plug in washer or reconnect power.
6. Check the MCU by looking for operations of the drive motor.
7. Check the drive motor for powered rotations.

The board may require replacing, let me know if you have questions with doing any of the above

Posted on Jun 17, 2008

  • Benjamin Patri
    Benjamin Patri Jun 28, 2008

    If you are satisfied with your experience here, then feel
    free to provide me with some feedback by rating my solution. If you need any
    more help, I would be glad to assist you, just ask.



    Thanks for your time and service and I hope you have a Great Day!




×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Flashing...like what..?

Posted on Jun 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pump panel board


I have a may tag epic that was flashing

Apr 14, 2012 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

The metal wire ring fell off the rubber seal at opening and the seal is also off centered I have a matag epic washer


Hello,

With it being off centered and the seal retainer coming off what needs to checked is the concrete counterweight thats bolted to the front of the tub has come loose and wobbling free.

Gene

Aug 05, 2011 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

My Maytag washer has a flashing F 15. What does that mean?


The following list of codes indicates an electronics communication problem with the washer: * Epic® washer - F05, F07, F09, F10, F11, F13, F14, F15, F21, F22, and FdU
* Epic ZTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33


To remove the error display, press Pause/Off or Pause/Cancel twice.

zjlimited_453.gif

If Pause/Off or Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, call for service.

Hope this helps.

Jun 24, 2011 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Mani have an error coming on my epic maytag washer it flashes the letter F and then the letters DL please help


Hello the error code F with a DL is usually a clogged or kink in the drain line.
Unplug washer and remove drain hose and clean it out.

Check area where Line connects to washer closley for any debris and remove it.

May 08, 2011 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

When I open the door of my wash machine it smells bad. What would cause this? Is there a lent trap with lent in it, causing this? If so were is the lent trap? Matag Neptune Washer.


Hi dear.I'm bit foreign to this model of Maytag.There for I do not know exactly where is the lint filter on it (Refer it's user manual)but I can help with the Bad Odour.If you are doing COLD WASH most of the time with your washer bad odour happens because of body oil & some other deposits(residue) left or sticks the drum after each wash.Cold wash cause that & if it gets worst mould problem going to start up.That's why you have to run the machine empty on Hottest Cotton wash cycle with some bleach every 6-8 weeks to get rid off residue.You'll see the difference.I hope that helps.Thanks.

Sep 02, 2010 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Keeps flashing LF


call matag tech in california they might still be open

Jul 29, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Washer flashing 02 F. Maytag epic washer won't spin -flashing 02 F about 15 minutes into the cycle. We just had new electrical components put into it.


You need to use the HE detergent. I believe that is a drain problem. By using the regular detergent that causes more suds and in turn clogs your drain

Jul 16, 2009 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Maytag Epic Error "F"


I dont know how to fix it but if you hit OFF then start it restarts, i get the same message it will appare over and over again untill the load is done.

Oct 18, 2008 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

High speed spin problem


contact maytag at 1-800-688-9900 and ask whats going on and you need your machine fixed while it is under warranty, it is only covered for a year.
they may refer you to a whirlpool number but whirlpool now ownes matag so this is ok

Jan 21, 2008 | Maytag EPIC MFW9700S Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...