Question about Garmin nuvi 350 GPS Receiver

1 Answer

GPS ARPS need to hook gps 350 to a kenwood tm710a.cable that came with radio.have a 3 point sterro plug.1.white,to data in to gps 2.red todata out on gps.3.shield to gnd to gps..if i cut off the computer plug.not the min usb plug.what wires do i use to match up to the radio plug?or tell me what the wiring out is from the min usb plug.73 de km5tn..km5tn02@yahoo.com...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 174 Answers

Are you joking....usb is not serial data....you need a diferent gps to give out serial data....try a streetpilot 3

Posted on Jul 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My garmin nuvi 200w keeps going into mass storage mode when plugged in to charge.as soon as it is plugged in to charge the screen appears that shows the garmin plugged in the computer. and the map...


1) Disconnecting the nuvi from the charging cable.

2) Press and hold the battery meter icon for 8 seconds. This puts the nuvi into "system test" mode.

3) Plug in the power cable.

4) Click "Exit." The nuvi should now reboot, but remain in GPS mode!

Aug 06, 2011 | Garmin nuvi 200W GPS

1 Answer

I bought a vehicle that has a kenwood 5120 stereo, i want to hook up the satalite radio and do not know how.


Typically, satellite units get plugged into the antenna input of your radio, then you tune your radio to a specified station to access the satellite tuner

Feb 14, 2011 | Kenwood DNX5120 DVD Navigation System GPS...

1 Answer

Code to unlock a kenwood dnx5140 car gps sterio


ype 1

  • During the code request mode, while pressing the DISP key, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
  • Enter the security code with the Kenwood remote.

Type 2

  • Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
  • Enter the security code with the Kenwood remote.

Type 3: Model# DPX-4020 and DPX-4030

  • Press and hold the 1 then the 6 preset keys until the display shows the letter C.
  • Enter the security code with the Kenwood remote.
Entering Letters with a Kenwood Remoteo enter a letter with a Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter. Press the Track Up or Next Track key to send the letter. To send the letter A, press the 2 key once then press the Track Up key. To send the letter B, press the 2 key twice then press the Track up key.
Finally, when all of the letters are entered, press and hold the Track Up button for 3 seconds.
The key sequence to enter the security code KCAR is:
  • 5
  • 5
  • Track Up
  • 2
  • 2
  • 2
  • Track Up
  • 2
  • Track Up
  • 7
  • 7
  • Track Up
The Kenwood should then enter tuner mode.
A Security Code Bug in Some Kenwoods

Oct 31, 2010 | Kenwood DNX5140 Car GPS Receiver

1 Answer

Connection to PC for Nav software


Assuming you have GPS input to your 1732 (i.e. GP310/320 sensor), you'll need a 7 pin NMEA data cable (000-154-028) wired to a D-sub 9 pin (serial) plug. The shield goes to pin 5, blue to #3, & white to #2. Jumper pins 7 & 8 together. The 7 pin cable goes to Data port 3 of the 1732.

Jul 12, 2010 | Furuno Navnet 1732 GPS Receiver

1 Answer

Installing the Lowrance HDS 5


You do not need the data cable connected unles you are hooking it up to other electronics, ie computer, second GPS sounder ect. You only need to conect the red to the positive on the battery and the black to the negative.

Jun 13, 2009 | Lowrance Hds-5 GPS Receiver

1 Answer

Need to connect NMEA0183 to radio


Thank you for your quick respond.

I downloaded the owners manual and it had all the informaion I needed.

May 24, 2009 | Magellan GPS 320 GPS Receiver

1 Answer

GPSMAP 180 power/data connector


Okay
guys: book says:
PIN 1 (red) 10-40 volts DC
PIN 2 (black) Ground
PIN 3 (blue) NMEA out Shows this goes to Autopilot/NMEA devise and to RXD positive RXD negative goes to ground (black)
PIN 4 (brown) NMEA in Goes to GBR 21 Beacon Receiver to a blue wire, brown wire on thaat devise goes to PIN 3 and the negative goes to ground
PIN 5 (white) no connection
PIN 6 (Green) no connection
PIN 7 (yellow) goes to alarm low Shows going to negative terminal on alarm relay and positive terminal goes to PIN 1 (red)

All Greek to me, have fun

Seadrive Joe

Feb 03, 2008 | Garmin GPSMAP 180 GPS Receiver

1 Answer

Internal wiring


Hi - I have a Garmin GPS 126 in bits on my desk ready for a new cable as the socket in the back has some broken pins.

Also refer to the Garmin GPS to PC Wiring Instructions here on the Garmin site: http://www8.garmin.com/support/faqs/faq.jsp?faq=68

The internal 8 pin white connector on to the back of the circuit board is as follows:

1 Red Positive
2 Black Negative
3 Yellow Data Out
4 Green Data In
5 not used
6 not used
7 White Alarm

All the best, Tony at KiwiGPS, New Zealand

Jan 23, 2008 | Garmin GPS 126 GPS Receiver

1 Answer

No guage screen on my garmin 4208


Need more info:

Is your Garmin hooked up to your engine's computer via an NMEA 2000 data cable?

The gauge option will not appear in the menu if the GPS does not recognise the data coming from your engine. (If you turn on the GPS simulator, you should see the gauges on that screen.)

There are 3 possible reasons that the gauges do not appear in the menu:

1) improper wiring between engine and gauges.

2) GPS has not been set up to receive data in the GPS's NMEA setup menu.

3) Engine has not been set up to send NMEA data.

This is a relatively new feature that only works on newer engines that are NMEA 2000 capable, such as Volvo and Evinrude Etec.  The engines usually need an optional instrument package to make use of the NMEA 2000 system.

We're just scratching the surface here, please reply with any questions.

Oct 22, 2007 | Garmin GPSMAP 4208 GPS Receiver

2 Answers

Radar screen shows "no scanner". Would like resistance data for cable pin-out from display to scanner head.


Hello Clifford,

This is an old message. Are you still having trouble with this or has it been resolved?

Aug 22, 2007 | Raymarine C80 GPS Receiver

Not finding what you are looking for?
Garmin nuvi 350 GPS Receiver Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2124 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...