Question about Furuno 1715 LCD Radar System GPS Receiver

1 Answer

Furuno GaAs FET Front End 4 Tone Daylight Display - when closing the DC breaker for the rada unit, the 10 amp fuse blows. Don't have a schematic. Don't know the model number. There are no data nor nameplates on the unit. The unit name is what is on the top margin of the front panel. Any help would be appreciated.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

Unplug the radar from it and turn on the display. If that does not blow the fuse, then your problem is either in the cable to the antenna or the antenna itself. Start there.

Posted on Jan 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brand new furnace wont start its a aruf 14 electric air handler with a 10 amp heater coil


the 3 amp fuse protects low voltage side of transformer. if it's blowing on a call for cooling wire pair going to outside unit bad or contactor in outside unit.

Nov 18, 2013 | Goodman Heating & Cooling

1 Answer

Fuse keeps blowing


Hi Anonymous, you have a hard/dead short that should be easy to find generally they are the easiest. Time to get out your test light and start tracking the wire from the power side of the switch, circuit breaker or the blown fuse receiver, when the test light quits lighting you are very close to your short. For a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

Jul 02, 2013 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

1997 Harley Ultra Classic 30 amp main breaker pops while riding. Also blows 10 radio power fuse


Hi Anonymous, you have a hard/dead short that should be easy to find generally they are the easiest. Time to get out your test light and start tracking the wire from the power side of the switch, circuit breaker or the blown fuse receiver, when the test light quits lighting you are very close to your short. For a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

Jul 19, 2012 | Harley Davidson FLHTCUI Electra Glide...

1 Answer

1997 Harley Ultra Classic blows 10 amp radio power fuse and 30 amp main bike breaker


Hi Anonymous, sounds like you have a hard short between the battery, ignition switch and the radio. For a free wiring diagram please visit the website below:
Harley Davidson Wiring Diagrams and Schematics
Good luck

Jul 19, 2012 | Harley Davidson FLHT - FLHTI Electra Glide...

1 Answer

E-000003-0000


During printing, the main thermistor detects less than 120°C/248°F for 1
sec or more continuously.
Main cause:
The fixing film unit is faulty (main thermistor fault, thermal fuse blow, fix-
ing heater fault).
Or the power supply PCB is faulty.
Or the DC controller PCB is faulty.
Action1.
Malfunction
Turn off the power; wait for 10 min, and turn on the power. Is the problem
corrected?
YES:End.
2.Wiring
Is the wiring from the DC controller PCB to the fixing film unit normal?
NO:Correct the wiring.
3.Fixing film unit
Try replacing the fixing film unit.
Is the problem corrected?
YES:End.
4.Power supply PCB, DC controller PCB
Try replacing the power supply PCB. Is the problem corrected?
YES:End.
NO:Replace the DC controller PCB

Nov 07, 2009 | Canon imageCLASS D320 Digital Copier

2 Answers

Mackie 1200/1400 blows all 4 10 amp fuses


missmatched impedance, insufficient ground, blown transistor.

Jul 20, 2009 | Bob Mackie Mackie M-1400i Power Amplifier...

1 Answer

I have a furuno fcv 585 echo sounder with a FURUNO CA50/200-12M -c13298 BRONZE THRU HULL HIGH PERFORMANCE TRANSDUCER. The transducer has 4 wires and it looks from the schematic that it attaches via a...


you need an MB1100 matching box has the 10 pin pigtail for your sounder and accepts bare wire input from your ducer
this will also ensure that all power from sonar get to ducer, but it from me if you like 847-746-0100

Jul 09, 2008 | Furuno FCV-582L GPS Receiver

1 Answer

Furuno gp31


i dont think you should have a fuse on the - wire its only a return to earth its like closing the stable door after the horse as bolted

May 11, 2008 | Furuno GP31 GPS Receiver

1 Answer

TempStar 10 AC


visit www.gotempstar.com for the schematic on this unit. Coincidentally, your air handler unit should not draw 15.6 amps with an additional 40 for the heater.

Jan 07, 2008 | Dishwashers

Not finding what you are looking for?
Furuno 1715 LCD Radar System GPS Receiver Logo

Related Topics:

661 people viewed this question

Ask a Question

Usually answered in minutes!

Top Furuno GPS Experts

Cindy Wells

Level 3 Expert

5187 Answers

Steve
Steve

Level 3 Expert

694 Answers

The Knight
The Knight

Level 3 Expert

74468 Answers

Are you a Furuno GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...