How can I get my WEP id again...I lost it?????

If you have los the wep key for your personal wifi at home reset your router to factory defaults and start again please advise of router make and model and i willl assist you in re setting

You can connect pc only when web access provider confirms you and authenticate to connect to the internet vis wap id.WAP id can only being given by the provider so you must contact your provider to access it.

Best is to reset the router (see http://www.fixya.com/support/r7947146-reset_belkin_router).
You will lose all the settings you have (you can get them again from your ISP if you need to).
Alternatively can try to find the wep code this way: http://lifehacker.com/#!5305094/how-to-crack-a-wi+fi-networks-wep-password-with-backtrack but that won't solve the missing router password.

There are two passwords for the router: the WEP/WPA password, which lets you connect to it wirelessly; and the admin password, which lets you change the configuration. If you have lost the WEP/WPA password but know the admin password (or haven't reset it from its factory default), you can connect a temporary cable between your router and your computer, and use the Easy Install Wizard or the manual configuration steps (see manual) to change the WEP/WPA password to something you know. If you do not know the admin password, then you have to reset the router to factory defaults by pressing and holding the Reset button for at least 10 seconds, and then using the Easy Install Wizard to configure it again from scratch.

WEP == Wired Equivalent Protocol

Connect a computer via an Ethernet-cable to the router.
Login to the router, with the correct ID/password.
Click on "wireless" and then click on "status".
The WEP-key will be displayed.

On the back of the router there's a very small reset button where you stick a paper clip or a small pen tip in.Insert it in there and hold for about 10 secs or until the green led lights starts to flash. Once you do this it will reset the routers password to default, which is: user id: admin, pwd: password.

You may have to reconfigure the other laptop again or recreate the wireless connection.

you have to log in http://10.0.0.2 at the button/under of your router tells you the generic name and password you need to enter, just follow the instructions, you'll be able to change your settings

The WEP code is whatever you make it when you set up the wireless connection. If you have lost this key. It is best to use the manual reset located on your wireless router. Will require a small point like a paperclip. Then you will have to access the router and set up the wireless internet over again. Then you can secure it with a new WEP key.
If you need further assistance please ask me.
Thanks,
Lee

Hello, You should be able to reset the router to default. Look for a reset hole on the back. This will set the SSID, WEP and WPA off. ID and Password would be set to "admin". You can then turn WEP back on and set a new PSK. Hope this helps.