Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher and Paykal GWL 10 US - Stops before rinse

The washer has been stopping during or after the wash cycle. It then begins to beep about 1 time per second. The 3rd and 4th light in the wash cycle and the first light in the rinse cycle are lit. To get the machine to finish the cycle I have to press the power button off and then back on, advance to beginning rinse cycle. It will then finish. Next load it does the same thing. Any help will be appreciated. Thanks Dan machine stops anywhere during the cycle. the only way to start it is to turn off at wall and unplug for 5 minutes, it usually restarts at same part of cycle. also machine will not turn on if left turned on and plugged in at wall after last use.

Posted by on

  • colby28 Jun 17, 2008

    thanks blygh. i'll give that a go tomorrow. spoke to FP - they suggested a new machine. gee what a surprise

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

52. (00110100) Eco - Diverter Top-up Fault diverter valve made be stuck in half open position ,may be a mechanical obstuction or the wax filled solenoid that actuates it may be faulty .located under machine beside pump .

Posted on Jun 17, 2008

1 Suggested Answer

SOURCE: Fisher and Paykal GWL 10 US - Stops before rinse

...most likely the balance sensor, a small contact switch behind the main control panel that is telling the machine it is out of balance, more likely the switch and/or contacts have corroded...

Posted on Aug 20, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model Gw709AU


When you start your machine is the water just go stop go stop,
Just wait for the machine to display an error code on the wash progress lights and beeps constantly.
It could be the Rotor Position Sensor, out of balance switch or lid magnetic reed switch.
Your error code will determine this.
Is your machine beeping & showing a weird pattern of lights on the wash cycle, It is displaying an error code,
To read this error code you start at the red spin light & work to the left only add up the lights that are on. Red spin light = 1 2nd rinse light =2 1st rinse light =4 last wash light=8 4th wash light=16 3rd wash light=32 2nd wash light=64 1st wash light=128
j8paojvh5jrgaaaaabjru5erkjggg==


2_26_2013_3_17_31_am.jpg

Feb 20, 2013 | Fisher and Paykel Washing Machines

1 Answer

Keeps stopping during wash cycle


Hi Kathy,just read your posting.When the machine stops during the cycle does the machine beep and show an error code?Could you confirm the model number of your machine.Now if you have an LCD screen on your machine the fault code will appear in it but if you have no screen then the error code will appear as lights .These lights will be a row of 8 lights.Starting from the left to right which lights are on when the machine is beeping.Is it the 2nd and 4th or the 1st and 7th ---etc---?Please reply with additional information and I am sure I can help you.Looking forward to your reply.

Sep 18, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

We have a WGL 10 US model F&P washer. Most


Are you waiting long enough? Ours seemed to stall but eventually would start up again. Have you tried diagnostic mode? email me at Yahoo.

Sep 01, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

3 quick beeps during cycle if you can get it to stay in a cycle


MY KENMORE OASIS HE IS DRIVING ME CRAZY! THE CYCLE SIGNAL CONTINUES TO BEEP AT LEAST 25 TIMES, STOPS FOR MAYBE 20 SECONDS, THEN BEEPS AGAIN ABOUT 25 TIMES. THE WASHER WORKS GREAT, BUT IT WILL NOT STOP BEEPING! HELP!!!!!

Sep 13, 2008 | Kenmore Oasis HE 27062 Top Load Washer

1 Answer

The washer has been stopping during or after the wash cycle. It then begins to beep about 1 time per second. The 3rd and 4th light in the wash cycle and the first light in the rinse cycle are lit. The...


Plug off the wall. Open up behind the machine. Check to see if any wires loose. See that the wires from the control panel to the motor are plugged in tight. Vibration from the machine could loosen the wires and give the display wrong readings, or disrupt the run.

Rate me please..........

Dec 26, 2007 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher and Paykal GWL 10 US - Stops before rinse


...most likely the balance sensor, a small contact switch behind the main control panel that is telling the machine it is out of balance, more likely the switch and/or contacts have corroded...

Aug 06, 2007 | Fisher and Paykel GWL11 Top Load Washer

3 Answers

1 beep per second and odd light sequence


there some simple solutions but may not always work but everyone should try. underneath when the water pump engage with the tub. there;s a white plastic clip press it out and turn the water pump. it will come off the tub. before doing this you should have the washer disconnected. have someone or put something under so the washer won;t fell on you while reaching down. sometimes debris gets stucks on the way from the tub to the pump. it insert your fingers inside once the pump is taken out and if you find debris take it out. put back the pump and connect the washer again. this can be a very simple solution it won;t work all the times. but what if it does. :)

Jun 14, 2007 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Beeping and odd light sequence


I have the same problem with my 603 washing machine stopping in the middle of a cycle and i would have to go and manually advance the wash. I have just replaced the top curcuit board with a new one. can you please help or offer a solution. Thank you.

Jun 14, 2007 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...