Question about Washing Machines

1 Answer

A207 starts and stops freq during some steps in entire cycle but not all

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,891 Answers

This sounds like a timer contact / very common / when it stopes if its the timer yo can lift or wiggle the timer shaft and if it starts it is the timer . also by lifting the lid and lowering it it may be the lid sw . out of adjustment . i would adjust the lid sw first and if the problem does not go away it the timer . The timer is ( are you sitting down 185.81 ) and I do have 3 in stock . .. if you need one you can send me your old one and i will shil you one back for 125.00 plus shipping . and this will have to be pre paid . ( pay pal works or ? you let me know .. mm hope this works . the 207 is a good 2 belt machine one of maytag 's best ,, mm the maytag man . or majic **** .

Posted on Nov 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front load washer FTF530FS1 stop mid cycle, sometimes for more then an hour, then starts up again, entire cycle can take more then 3 hours? Also during cycle is very loud.


Seems you have possibly 2 problems. One, check to see if the element is not faulty. If no heat during heating cycle, the washer wont proceed for a long time.. Two, if noisy, especially on spin cycle, the bearings (2 of them) and the seal are faulty. Replace them as soon as possible.

May 27, 2010 | Frigidaire FTF530FS Front Load Washer

1 Answer

Noise hear during washing cycle?


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Mar 28, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Excessive noise during the spin cycle. we have owned the washer for 16 months. problem started 1 wk. the machine is level.


It's noisy Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 03, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Vibration of wash machine


Hi!

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary. If there's a loud thumping noise during the spin cycle, the load of clothes has probably gotten unbalanced. Open the lid, redistribute the clothes in the washer, then re-start it. Repeat these steps if necessary.

Please do accept this solution and revert for further assistance.


Thanks

Rylee

May 22, 2009 | Danby Washing Machines

1 Answer

Water leaks during drain cycle and the machine


Hi

If the water leaks during drain and spin only: A washer that leaks only during the drain/spin cycle often has a leak in the main drain hose. Inspect the entire hose and correct any problem you find. Alternatively, the steel or plastic outer tubs can rust, split, or be punctured. This may be most visible during large loads and high water levels. If this happens, you may have to replace the entire outer tub--but that may not be an economical repair to make. Consult a qualified appliance repair technician for further details.


Please do rate this solution as "FixYa" if found useful.

Thanks
Rylee

Mar 17, 2009 | Washing Machines

1 Answer

Load squeal when it in the agitation cycle.


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary. 
for detailed help with diagrams and step by step instructions click the link http://www.applianceaid.com/washerspinnoise.html

Dec 29, 2008 | Admiral AW22 Top Load Washer

1 Answer

Danby washing machine noisy only during spin cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 13, 2008 | Danby DWM99W Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Brad Brown

Level 3 Expert

15639 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...