Question about Computers & Internet

1 Answer

Memory issue computer display insufficient memory whenever I play DVD on Power Dvd 5.0 after 1 or 2 hour computer stops working and power DVD is not working- and then whenever I try to do anything on the computer it display insufficient memory- But My computer is having good configuration I have 236 RAM- so please assist me- Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

236MB is a very small amount of RAM, especially to be watching DVDs. You need to install additional memory. The minimum recommended these days is 1GB - 4x as much as you have now. Most new systems aren't shipping with less than 2GB. Install some additional RAM and your playback issues should be alleviated.

Posted on Jun 17, 2008

  • Greg Mlynarczyk Jun 17, 2008

    Are you kidding me? Two stars? When your computer reports you don't have enough RAM, what else do you think the problem might be?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a PHILIPS DVP3962. My DVD player used to play where I left off watching my DVDs, but recently, when I turn it off and turn it back on, it starts from the beginning of the DVD. Dose anybody know why...


Resume function is wiped from the player's memory buffer whenever the unit is switched to standby (either with the [POWER] button on the main unit, the remote or turned off at the wall), the disc is removed, or the [STOP] button is pressed twice (either on the front or via the remote).

(The simplest thing you can try is to insert a DVD, play a few minutes of its main title, press [STOP] once, not twice, leave it for 10 minutes, then press [PLAY] - it should resume, and thus continue your movie from where you left off)

Resume is considered 'temporary memory' in DVD devices, and therefore is not intended to store the playback point of the disc permanently whenever power is lost, [STOP] is pressed twice or discs are ejected.

However, this is relatively normal, and is not a fault, but it can be annoying to the user.

Apr 26, 2011 | Philips DVP3962 DVD Player

3 Answers

Not playing NTSC DVDs


I can see if there is an unlock code for your device

Apr 21, 2008 | Yamaha DVR-S150 DVD Player

1 Answer

Hi is the UNlocking code for LG DVD PLAYER DVD-233OP SO IT CAN PLAY DIFFERENT DVDS


1. Power on the player with no disk in the drive.
2. Wait for the "No Disc" message to appear.
3. Press Pause on the Remote.
4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display).
5. Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.).
6. Press Pause on the Remote.
7. Power the player off, wait 30 seconds and then power back on.
NB: If the above code fails to work then once the player has displayed the "No disc" message press Stop before entering the above code
Hope it helps!

Oct 30, 2008 | Televison & Video

1 Answer

Suddenly "cannot play this disk" on Sony DVD/CD..every DVD...CD's work!


I have the same problem. I have a 5 year warranty from the company I purchased the unit from. I am not sure if they will replace it or not. I am reluctant to buy another one with this known issue. We have enjoyed the unit for nearly 3 years with no issues.

Oct 19, 2008 | Sony DVP-CX985V Multi-disc DVD Player

2 Answers

Machine stuck on hello...pressed power & stop to no avail


Hi. The most common culprit for this HELLO message issue is a faulty DVD-RW drive. To make sure that this is the case, you will need to replace the DVD-RW drive with another DVD, DVD-RW, or another spare hard drive in it's place to make sure the unit powers on and gets past the Hello message. Just make sure the replacement is configured correctly via the master/slave jumper on the back. If this does nothing to help, then the fault could reside in the motherboard or hard drive. You can look at this post where I helped out a user with spare parts http://www.fixya.com/support/t1195654-drc8030n_motherboard

Oct 09, 2008 | RCA DRC8030N

1 Answer

Code for dvd player dvd252


Pioneer DVD player (DV-505, DV-525, DV-606, etc.) Note: Some codes work on LD/DVD combo players only, such as "Disc side A/B".
Note: The LD/DVD 0525 code will work too, but the arrow keys (among other things) won't work without being keymoved to the correct codes.

000 Chapter prev
002 Pause
003 Scan reverse
012 Disc side A/B
014 Random
028 Power on/off
029 Step/slow reverse
030 Audio
031 Exit?
033 Menu
034 +10
035 Power off
061 Power on
062 Power on
063 Demo (when player is off)
064 Power on
067 Reset (when player is off)
076 Program
077 Repeat A-B
078 Disc side B
080 Disc side A
082 Enter
084/086/088/090 Shuttle reverse
085/087/089/091 Shuttle forward
092 A/D/CX
093 8
097 9
140 Return
142 Last memory
143 Up arrow
147 Down arrow
150 Subtitle
156 Title
157 Mode (set-up)
158 Open/close
160 Angle
161 Condition
162 Step/slow forward
163 Chapter/time/frame search
191 Chapter next?
195 Chapter prev?
196 Right arrow
203 Left arrow
204 Repeat
205 Time search
208 Clear
209 Chapter search
211 Display
212/214/216/218 Jog reverse (w/still)
213/215/217/219 Jog forward (w/still)
220 4
221 0
222 6
223 2
224 5
225 1
226 7
227 3
252 Chapter next
253 Stop
254 Play (will turn on player and resume if player powered off)
255 Scan forward

Jul 11, 2008 | Televison & Video

1 Answer

SCREEN SAYS "SAFE" ?DO IDO TO GET RID OF IT???????/


To remove "SAFE" from the front display, using the remote control, press and hold "INFO" for 5 seconds until it disappears. This was probably acitivated while you stopped a recording which can trigger it, of you may have activated "Safe" by pressing the INFO button several times. This is to prevent access of the recorder by locking all controls. This is for the DVD Recorder/VCR combo VR320 and the 1st generation DvD Recorder DVR-130.

Even though this was a product I regret purchasing, it isn't as bad a people make it out to be. It works best with DV cable recording from 1 Hour Mini-DV tape camcorders to 1 Hour XP Record DVD mode. It is probable one of the best. Only issue I have is when you try playing a finalized DVD-R disc in another DVD player, there is a chance it might not work because of the Highest quality 1 Hour record mode. Standard is 2 Hour SP. You will have to burn an exact copy using DVD copy software on your computer to DVD-R. This will fix the problem.

May 31, 2008 | Samsung DVD-VR320 DVD Recorder/VCR

3 Answers

Need setting to change regional code on samsung DVD P172


This works to change region code 5.
This is how it works.
1)Power on player.
2)Ensure that there is no DVD inside the player.
3)The tray should be closed.
4)Press "Subtitle" on the remote control.
5)Press 53814 for region 5 (For other regions see any of the other cracks)
6)The region code 5 will be displayed on the left top corner of your screen.
7)Now press 9. A 9 will be displayed on the top left corner of the screen.
8)Press Subtitle on the remote again
9)Power off the player.
10)Power it on again and you are region independent!!
Worked for me.

Mar 13, 2008 | Samsung DVD-HD870 DVD Player

2 Answers

Remote Control Control Codes


has anyone solved this problem???

Jan 13, 2008 | Audio Players & Recorders

2 Answers

Sony dvd tray locked


had the same prob with a sony dav dz it kept saying locked but after hours and hours of pressing random combinations it came off im sure it was unplug plugback in then hold power and open tray and tap stop or a combination of those buttons.i woud try it again on mine to make sure but i do not want to lock it again.

Oct 23, 2007 | Sony DVP-S330 DVD Player

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...