Question about Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

My Kenmore Elite Oasis washer unbalanced signal seems to be very sensitive. Only after several tries of readjusting the load to get it really even that the washer will spin without stopping. I made sure that the washer is level and sturdy. Is there any quick fix for this problem?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

If the washer throws an UL error code with out any clothes in the washer then the issue must be concerned with the mechanical alignment inside the machine or a bad CCU.

The most common problem which can cause this is some sort of mechanical hinderance which does not allow the basket to move freely.

The suspension system which holds the basket in its place might be faulty and causing the unbalancing. In this model i think there are plastic ring at the bottom of the basket . Even if they are worn out or moved out of position it may cause the UL error code you are facing

Posted on Nov 11, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Kenmore Elite Oasis HE top loader washer that every time it reaches the spin cycle the UL error code appears and will not spin and then in a few seconds it will start to rinse again.

Posted on Jan 12, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unbalanced load stoped it mid cycle no codes shown how do you restart


Normally you re position the load until it is evenly distributed around the tub. Close the lid and press resume or restart.

Aug 17, 2013 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Why dose my kenmore elit oasis he washer keep geting unbalanced with or with out a load in it


Possiable it has a broken yoke on the inner drum, Mine broke completely off. Lucky it was covered by Sears warrenty. Cost is over$1,000 to repair with out warrenty.This is a common problem with He Washers..

Sep 30, 2012 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore elite oasis washer makes noise and unbalanced


If your washer start going to high speed and it make unbalance and bangin on the frame. there was a stator may need replace....good luck

Nov 28, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My Kenmore Elite Oasis starting to show "UL" and immediately stopped working. How do I fix this issue?


UL = Unbalanced Load

re-distribute the clothes and re-try.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Aug 24, 2010 | Kenmore Oasis HE 27082 Top Load Washer

2 Answers

In mid wash the Kenmore Elite Oasis HE flashes F51 and


check if basket turns freely. if it does replace the main board

Jan 28, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

What does UL code mean on washer?


What does error code UL mean on digital Kenmore Washer?

Jan 17, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My kenmore elite washing machine always has an unbalanced indicator, even if i run it empty.


Check the balance load sensor.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Aug 06, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Unbalanced loads


There has been a noted problem with the Kenmore Oasis and the "Out of Balance" or "Ob" error. If this is what you are experiencing, the problem has been attributed to a couple of things. Not having sufficient amount of clothes in the wash tub during a wash cycle. That is...smaller loads cause a problem when the washer tries to distribute he weight evenly in the spin cycle. Not enough clothes, no balanced weight, you get an Out of Balance indication. The other problem (which tends to be the more common issue) is the control board under the operator console. The manufacturers developed a new software to run on the new and improved control boards that is supposed to correct this problem. Double check your load distribution first (which it seems you already have), then check with the manufacturer to see if there may be a recall on your washer that corrects this problem at no cost to the consumer. I hope this helps you some.

Nov 11, 2007 | Kenmore 4.5 cu. ft. Oasis Canyon Top Load...

Not finding what you are looking for?
Kenmore Elite Oasis 27052 Top Load Washer Logo

1,769 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2248 Answers

fordexpert

Level 3 Expert

5537 Answers

 Brian Main
Brian Main

Level 3 Expert

464 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...