Question about Linksys Wireless-G WRT54GS Router (e125894)

1 Answer

The Cisco System logo just stays orange, I attempted to repair on my lap top but it won't let me repair.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Linksys Master
  • 7,733 Answers

The router can be set to factory default by performing either of these two steps:

Resetting the Router Using the Reset Button
Resetting the Router Using the Web-Based Setup Page

NOTE: Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. All of the settings of the router will then be erased and the router's IP address will become 192.168.1.1.

To perform a hardware reset on your Linksys router, follow these steps:
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the router before resetting.
Step 2:
Press and hold the Reset button of the router for 30 seconds.

the Cisco System logo just stays orange, I - 3798-001.png

Figure 1: Location of the Reset button on a Linksys BEFW11S4 router.
NOTE: The image may vary depending on the model number of the Linksys device.

4030-022.png

Figure 2: Location of the Reset button on a Linksysthe Cisco System logo just stays orange, I - 4030-024.pngter.

4030-024.png

Figure 3: Location of the Reset button on a Linksys WRT54GC router.
NOTE: If the image of your router looks different from the ones shown above, consult your router documentation.
Step 3:
If the normal reset does not work, try to press and hold the Reset button for three seconds. The Ethernet light should go OFF then back ON. Unplug and re-plug the router's power adapter while pressing the Reset button. Keep holding the reset until the power light stops blinking.
NOTE: The router must be powered ON when you press the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the router's web-based setup page using a Mac computer, click here.
Step 2:
When the router's web-based setup page appears, click Admithe Cisco System logo just stays orange, I - kb4008-004_en.pngen click on Factory Defaults.

kb4008-004_en.png NOTE: If the screen on your router's web-based setup page looks different, click herthe Cisco System logo just stays orange, I - kb4008-005_en.pngStep 3:
Click on Restore Factory Defaults and select Yes.

the Cisco System logo just stays orange, I - kb4008-006_en.pngi.fixya.net/uploads/images/kb4008-005_en.png" alt="kb4008-005_en.png" class="h_mi" /> Step 4:
Click OK.

kb4008-006_en.png


Related Articles:

Accessing the Router's Web-Based Setup Page
Setting-Up a Router with Cable Internet Service
Setting-Up a Linksys Router Using DSL Internet
Changing the Linksys Router's Password

Posted on Nov 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i fix my lap top battery circuit after fixing new cells?


A very dangerous thing to do and possibly the pcboard and temperature sensor inside the battery is now damaged. Probably cheaper to buy a new battery through ebay than purchase new cells to attempt a repair.

Nov 17, 2014 | Computers & Internet

1 Answer

Need cisco network magic pro key pls


Try www.wanetelecoms.com

I get nearly all my software on request from there.

Jan 22, 2014 | Cisco NM300 Network Magic Pro 5.5

1 Answer

Orange light on the router


The color orange indicates that

the Router is not using the SecureEasySetup

feature, while the color white indicates that the

Router is using the SecureEasySetup feature.

When the Router enters SecureEasySetup

mode, the Cisco logo will turn white and

start flashing. After the Router has generated

the SSID and WPA Shared Key, the Cisco

logo will stop flashing and stay white.

So this "feature" can be turned off (meaning the light is off)

On the web-based router setup (192.168.1.1 in web browser) go to Wireless > Advanced Wireless Settings

Secure Easy Setup
This feature allows you to enable or

disable the SecureEasySetup feature. Select Disable to

disable the feature and turn off the button's light. The

feature is enabled by default.

Click the Save Settings button to apply your changes, or

click the Cancel Changes button to cancel your changes.

Dec 11, 2012 | Linksys WRT320N Wireless Router

1 Answer

Vizio m470nv will not come on, logo blinks orange to white.


It may not be the caps at all, a lot of the new LED Back-Lit TV have faulty LEDs. They short and pull down the power supply, and to a novice it will seem like a bad power supply. That means that you must replace the bad LED's in that particular LED strip before you can fix the problem. Not an easy repair for a rookie.

Mar 03, 2012 | Vizio M470NV 47 in. LCD HDTV

1 Answer

I just bought my new Cisco Linksys E1000 WirelessN Broadband router, set up the brand new cat 5 wires and hooked it to my modem. My old lap top is able to see the wireless network but my alienware lap top...


if you're running windows 7 sometimes it tries to auto detect the type of network but doesn't ask for a password, when it starts to try to auto detect hit cancel and enter in the password manually.

Dec 31, 2010 | Cisco Linksys E1000 WirelessN Broadband...

1 Answer

No wireless connection for laptop. Linksys router - model #wrt160n v2


you can run a direct line to that router and go to the cisco web site and get the information you need to run that router. its a pdf format and is 2.56 Meg. Try this

SecureEasySetup (Orange/White) The Cisco logo is the Router's SecureEasySetup button. It

lights up and will stay orange when the Router is powered on. The color orange indicates that

the Router is not using the SecureEasySetup feature, while the color white indicates that the

Router is using the SecureEasySetup feature. When the Router enters SecureEasySetup

mode, the Cisco logo will turn white and start flashing. After the Router has generated

the SSID and WPA Personal key, the Cisco logo will stop flashing and stay white.

To clear the SSID and WPA Personal key, press and hold down the Cisco logo for five seconds.

The Cisco logo will flash slowly as the Router resets itself. The Cisco logo will turn orange to

indicate a successful reset.NOTE: SecureEasySetup is a feature that makes

it easy to set up your wireless network. If you have SecureEasySetup devices, run the Router's

Setup Wizard CD-ROM and follow the onscreen instructions to use SecureEasySetup.

Power (Green) The Power LED lights up and will stay on while the Router is powered

on. When the Router goes through its selfdiagnostic mode during every boot-up, this

LED will flash. When the diagnostic is complete, the LED will be solidly lit.

DMZ (Green) The DMZ LED indicates when the DMZ function is being used. This LED will

remain lit as long as DMZ is enabled. WLAN (Green) The WLAN LED lights up when

the wireless feature is enabled. If the LED is flashing, the Router is actively sending or

receiving data over the network. 1, 2, 3, 4 (Green) These numbered LEDs, corresponding with the numbered ports on the Router's back panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected to a device through that port. A flashing LED indicates network activity over that port.

Internet (Green) The Internet LED lights up when there is a connection made through the

Internet port. A flashing LED indicates network activity over the Internet port.

Good luck

Nov 26, 2010 | Computers & Internet

2 Answers

I need to restore the factory settings on my router


You will find a reset button at the bottom of the router
Hold that button for 30seconds
Your router will be restored to factory settings
Ensure that you reconfigure it after you reset

Feb 10, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

CANNOT RESTORE MY E SYSTEM 5083 LAP TOP


1. restart ur system
2. press F8 when u see BIOS logo/Toshiba logo
3. u will get list of options
4. select "last known configuraion" like message using arrow key, and press enter

Dec 29, 2009 | Computers & Internet

1 Answer

Lap top dell inspiron 6400, cant get into windows,


Have you tried doing a winXP repair:

XP repair
When you boot with the Dell Win XP install CD-ROM, it loads a minimal operating system, similar to DOS, but compatible with Win XP. At the first screen you select install Win XP (not Recovery Console) and at the next screen it will find that you already have Win XP and offer to attempt a repair. This repair should not touch your Applications or data; it just reinstalls the Windows files. This is great because when it works you don't need to reinstall all your software.

If the repair does not fix it :

If you have documents you need,you would have to set the hard drive in an enclosure and copy the files over. Then you can run the Dell recovery disk . This will set it up as when it came from Dell.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Feb 22, 2009 | Dell Inspiron 6400 Notebook

Not finding what you are looking for?
Linksys Wireless-G WRT54GS Router (e125894) Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...