Question about Acer Aspire One PC Notebook

1 Answer

Camera assistance software for acer - Acer Aspire One PC Notebook

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Acer Expert
  • 239 Answers

Hi,

Please follow the below mentioned steps:

Camera Assistant Software:

a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.
b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.
NOTE: If you are not hearing the audio portion of the video you created, try the following: Verify that you do not have the audio capture muted. An X appears on the Mute button when Mute is selected.
Click the Functions button, and then click the Audio tab. In the Audio Output section, verify that the Digital Mic is selected from the Audio Device drop down list, and then click Apply. In the Audio Volume section, use the slider bar to increase the volume level. Verify that the notebook's volume is not muted. Pressing the Fn+End keys mutes the volume. Pressing the keys a second time restores the volume. Increase the notebook volume level by pressing the Fn+PgUp keys.
9. It appears that magnifier is turned on the computer. Please follow the steps mentioned below:
Click Start> Control Panel> Ease of Access> Ease of Access Center> Make the computer easier to see> Uncheck "Turn on Magnifier"
10. Reset BIOS Password: If you have forgot BIOS password then you have to reset CMOS jumper setting. Please follow the below steps: Open the Laptop back panel. Locate the CMOS battrey, remove it & then with the help of a screw driver keep on pressing the terminal inside it and turn ON the computer for 10 secs and Turn Off (make sure you keep on pressing the terminal with a screwdriver while turning ON). It will short the BIOS setting. Now, fix the CMOS battrey & restart the computer. This will take care of the issue.

Thanks and regards,
Jitha

Posted on Nov 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Acer Aspire one Netbook has a built it web camera but I can't find where it's located.


Hi,

Please find the below steps to access Camera Assistant Software:
a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.
b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.
NOTE: If you are not hearing the audio portion of the video you created, try the following: Verify that you do not have the audio capture muted. An X appears on the Mute button when Mute is selected.
Click the Functions button, and then click the Audio tab. In the Audio Output section, verify that the Digital Mic is selected from the Audio Device drop down list, and then click Apply. In the Audio Volume section, use the slider bar to increase the volume level. Verify that the notebook's volume is not muted. Pressing the Fn+End keys mutes the volume. Pressing the keys a second time restores the volume. Increase the notebook volume level by pressing the Fn+PgUp keys.

If the the above steps are not working, then follow the below steps:

You can reinstall the WebCam drivers from the Acer recovery management, to do so:
Start Menu> All Programs> Acer erecovery management> Restore> Restore Application & Drivers> Contents> Select Acer Crystal Eye and install it

OR

Got to http://gd.panam.acer.com/home/
Select the computer model
Select Operating System
Click Drivers
Select Camera (Suyin) and download it.
Once downloaded install it on your computer.

If still facing the issue, then you may need to perform full system recovery, to do so please follow the steps mentioned below

You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key
& keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.
NOTE: This will erase all the datas on the computer.

Thanks and regards,
Jitha

Dec 21, 2010 | Acer Computers & Internet

1 Answer

It says that it wont find my camara


Please find the below steps to access Camera Assistant Software:


a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.

b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.


If the the above steps are not working, then follow the below steps:


You can reinstall the WebCam drivers from the Acer recovery management, to do so:

Start Menu> All Programs> Acer erecovery management> Restore> Restore Application & Drivers> Contents> Select Acer Crystal Eye and install it


OR


Got to http://gd.panam.acer.com/home/

Select the computer model

Select Operating System

Click Drivers

Select Camera (Suyin) and download it.

Once downloaded install it on your computer.


If still facing the issue, then you may need to perform full system recovery, to do so please follow the steps mentioned below


You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key

& keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.

NOTE: This will erase all the datas on the computer

Dec 08, 2010 | Acer Aspire 5610-4648 Notebook

1 Answer

My acer orbicam stopped working


Please find the below steps to access Camera Assistant Software:


a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.

b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.


If the the above steps are not working, then follow the below steps:


You can reinstall the WebCam drivers from the Acer recovery management, to do so:

Start Menu> All Programs> Acer erecovery management> Restore> Restore Application & Drivers> Contents> Select Acer Crystal Eye and install it


OR


Got to http://gd.panam.acer.com/home/

Select the computer model

Select Operating System

Click Drivers

Select Camera (Orbicam ) and download it.

Once downloaded install it on your computer.


If still facing the issue, then you may need to perform full system recovery, to do so please follow the steps mentioned below


You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key

& keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.

NOTE: This will erase all the datas on the computer.

Dec 08, 2010 | Acer Computers & Internet

1 Answer

Hi my acer 4530 webcam doesnt work! everytime i click on the icon it says " camera not found" and the resoution goes crazy and everything becomes magnified. i tried downloading different...


Access Camera Assistant Software:


a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.

b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.

NOTE: If you are not hearing the audio portion of the video you created, try the following: Verify that you do not have the audio capture muted. An X appears on the Mute button when Mute is selected.

Click the Functions button, and then click the Audio tab. In the Audio Output section, verify that the Digital Mic is selected from the Audio Device drop down list, and then click Apply. In the Audio Volume section, use the slider bar to increase the volume level. Verify that the notebook

Dec 07, 2010 | Acer Aspire 5610-4648 Notebook

1 Answer

Acer orbicam 3690-2710 stop working after install. Initially worked upon setup, but when I try to reopen after closing it a message appears saying: "A webcam was not found or is not working...


Access Camera Assistant Software:


a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.

b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.



If the the above steps are not working, then follow the below steps:


You can reinstall the WebCam drivers from the Acer recovery management, to do so:

Start Menu> All Programs> Acer erecovery management> Restore> Restore Application & Drivers> Contents> Select Acer Crystal Eye and install it


OR


Got to http://gd.panam.acer.com/home/

Select the computer model

Select Operating System

Click Drivers

Select Camera (Orbicam) and download it.

Once downloaded install it on your computer.


If still facing the issue, then you may need to perform full system recovery, to do so please follow the steps mentioned below


You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key

& keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.

NOTE: This will erase all the datas on the computer

Dec 06, 2010 | Acer Aspire 3690-2710 Notebook

1 Answer

I have my own acer ASPIRE 4745 laptop. my acer crystal eye webcam is not found. what should i do?


Access Camera Assistant Software:


a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.

b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.

If the the above steps are not working, then follow the below steps:


You can reinstall the WebCam drivers from the Acer recovery management, to do so:

Start Menu> All Programs> Acer erecovery management> Restore> Restore Application & Drivers> Contents> Select Acer Crystal Eye and install it


OR


Got to http://gd.panam.acer.com/home/

Select the computer model

Select Operating System

Click Drivers

Select Camera (Crystal Eye) and download it.

Once downloaded install it on your computer.


If still facing the issue, then you may need to perform full system recovery, to do so please follow the steps mentioned below


You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key

& keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.

NOTE: This will erase all the datas on the computer.

Dec 06, 2010 | Acer Computers & Internet

1 Answer

I have a Acer aspire 5516 and every time i click on Acer crystal eye Webcam it says that Camera cant be found please help!


Hi,
Please find the below steps to access Camera Assistant Software:
a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.
b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.
NOTE: If you are not hearing the audio portion of the video you created, try the following: Verify that you do not have the audio capture muted. An X appears on the Mute button when Mute is selected.
Click the Functions button, and then click the Audio tab. In the Audio Output section, verify that the Digital Mic is selected from the Audio Device drop down list, and then click Apply. In the Audio Volume section, use the slider bar to increase the volume level. Verify that the notebook's volume is not muted. Pressing the Fn+End keys mutes the volume. Pressing the keys a second time restores the volume. Increase the notebook volume level by pressing the Fn+PgUp keys.

If the the above steps are not working, then follow the below steps:
You can reinstall the WebCam drivers from the Acer recovery management, to do so:
Start Menu> All Programs> Acer erecovery management> Restore> Restore Application & Drivers> Contents> Select Acer Crystal Eye and install it

OR

Got to http://gd.panam.acer.com/home/
Select the computer model
Select Operating System
Click Drivers
Select Camera (Suyin) and download it.
Once downloaded install it on your computer.

If still facing the issue, then you may need to perform full system recovery, to do so please follow the steps mentioned below
You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key
& keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.
NOTE: This will erase all the datas on the computer.

Thanks and regards,
Jitha

Nov 27, 2010 | Acer Aspire 3610 Notebook

1 Answer

Acer aspire 5536 crystal cam is not working on my windows 7


Hi,
Please follow the steps below:
Camera Assistant Software:
a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.
b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.
NOTE: If you are not hearing the audio portion of the video you created, try the following: Verify that you do not have the audio capture muted. An X appears on the Mute button when Mute is selected.
Click the Functions button, and then click the Audio tab. In the Audio Output section, verify that the Digital Mic is selected from the Audio Device drop down list, and then click Apply. In the Audio Volume section, use the slider bar to increase the volume level. Verify that the notebook's volume is not muted. Pressing the Fn+End keys mutes the volume. Pressing the keys a second time restores the volume. Increase the notebook volume level by pressing the Fn+PgUp keys.
Thanks and regards,
Anil.B.R

Oct 27, 2010 | Acer Aspire 5536-5224 Notebook

1 Answer

How do i switch on crystal eye on an acer aspire 5535 laptop?


Camera Assistant Software:
a. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.
b. On the Camera Assistant Toolbar, click the Start Camera button and click on the icons on the software.
NOTE: If you are not hearing the audio portion of the video you created, try the following:
Verify that you do not have the audio capture muted. An X appears on the Mute button when Mute is selected.
Click the Functions button, and then click the Audio tab. In the Audio Output section, verify that the Digital Mic is selected from the Audio Device drop down list, and then click Apply.
In the Audio Volume section, use the slider bar to increase the volume level.
Verify that the notebook's volume is not muted. Pressing the Fn+End keys mutes the volume. Pressing the keys a second time restores the volume.
Increase the notebook volume level by pressing the Fn+PgUp keys.

May 20, 2010 | Acer Aspire 5610-4648 Notebook

1 Answer

Hi i downloaded ares and it doesnt let me download music it sais i need a registration code how can i get it with out paying?


1. On the taskbar double-click the Camera Assistant Software icon , or from the Windows® Start menu, point to All Programs, Camera Assistant Software, and then click Camera Assistant Software. The Camera Assistant Toolbar location briefly displays on the desktop.
1. On the Camera Assistant Toolbar, click the Start Camera button .
2. In the Camera Assistant, click any one of the options.

Mar 14, 2010 | Acer Aspire One PC Notebook

Not finding what you are looking for?
Acer Aspire One  PC Notebook Logo

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

633 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...