How do i set the time on a timex 27 lap watch

SOURCE: Setting Timex watch

Since you have changed to the newest program I cannot get in the watch program I was using to set the watch. Please help.

SOURCE: Timex 1440 sports watch, WR50M

In "Time Mode" when time is displayed, hold the "mode" button until the alarm flashes. Press the "mode" button again and the display should change to the seconds flashing. Press the st/stop button to change location between seconds, minutes, hours, date, month, and day. Use the lap/reset button to make any changes.

SOURCE: timex 1440 sports digital watch time setting

1. Press and hold the mode button until it starts to blink, then release.
   
2. First the alarm time will come up.
   
3. Press the mode button once to get to the time and date.
   
4. The seconds will flash first. 
   
5. Press the st/stop button to toggle between the seconds, hour, minutes, date (month and day) and day of the week.
   
6. Press the lap/reset button to change the values.
   
7. When done, press the mode button again to return to normal.
   

SOURCE: Timex Expedition sports watch - how to view lap times?

I ran into the same problem w/ my new Timex Expedition. I emailed their help desk and they said that the Expedition models do not have lap memory feature. You need an IronMan watch to get lap recall. Wish I knew that before getting this Expedition watch...
Brian

SOURCE: how do you set Timex Triathlon Ironman watch?

First look for the set button then press it ,a long press and If it is blinking that's the time you to select the hour ,the minutes,the day/date,the alarms and the special features of your watch.The right button the up and down or for scrolling.Try all of this so your time will set.

Hope it may help you;

Regards;
VOTIT