Question about DISH Network IR Remote Control

1 Answer

I am looking for the code for my Visio Sound Bar to program into my Dish Network remote to the AUX button. Has anyone talked with Visio Support to get this code? Thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 358 Answers

Ronwright22

I have provided a link for you to Vizio's Website. The information below is for a VSB210WS sound bar. I would go to this link and research your model number and look for the code. You may try the code on this screen to see if it will work. I have also provided a link with instructions on programming your DISH remote to other components.

Vizio Website:

http://www.vizio.com/vsb210ws.html
This is the VSB210WS sound bar.

Programming a Universal Remote to operate the HD Sound Bar System If you own a VIZIO TV with a Universal Remote that uses a 5-digit programming code, you may program a device button with code 31517. This will map the Universal Remote button to operate the HD Sound Bar System as follows: Pictured at right is the VIZIO VUR8P Universal Learning remote.

Ray Calo
DISH Network

Posted on Jan 22, 2011

  • Ray Calo
    Ray Calo Jan 22, 2011

    This is the link with instructions for programming the DISH remote to the sound bar:




    Address To Other Equipment Using Code

    • Remotes: Multiple Mode Buttons (TV,VCR, AUX)

      1. Press and hold the desired Mode button until all mode button backlights come on, then release.

      2. Use the number buttons to enter the device code corresponding to the equipment.
        AUX Mode: Before entering the device code:

        • Press 0 for a TV

        • Press 1 for a VCR/DVD

        • Press 2 for any other device.

      3. Press the pound (#) button
        Note: The light will blink off after each digit is entered and then return to a steady light.

      4. Press the POUND (#) button.
        If the code entered is valid for the remote, the mode light flashes three times.

    Ray Calo
    DISH Network

  • John Rambo Jul 02, 2013

    Aux code for my vizio sound bar VHT215 is 2-709

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a dich remote to a visio tv


      Use the RECOVER button to get back to watching satelliteprogramming if you accidentally change channels or inputs on your TV. Press POUND. Press & hold the TV Mode button until all Mode buttons light up. To take the remote out of Limited Mode, use the PAGE DOWN button instead of the PAGE UP button in step 2.

      to download the User Guide - Dish Network

      www.dish.com/downloads/tv.../2-Way_RC_UserGuide.pdf Dish Network
    Feedback

    Program Remote to TV/Other ' MyDISH ' DISH Customer ...

    https://www.mydish.com/support/program-remote-to-tv

Jan 25, 2016 | Televison & Video

1 Answer

Insignia soundbar


I have listed the steps below to assist with programming the remote to your Sound bar. Please know that we do not promise your remote will function with your sound bar. If you have any other questions, let me know at Kimberly.escobar@dish.com!

Visit this link to obtain the code/s to address remote to sound bar: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The Aux button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code and try this procedure http://www.mydish.com/support/program-to-tv-scan-non-basic?WT.svl=leftnav

Kimberly Escobar
Social Media Representative
DISH L.L.C

Feb 12, 2014 | Televison & Video

2 Answers

I can't find a code for my BOSE Solo on the Dish network Hopper remote. Can anyone help?


Don't go and search for IR codes as you'll waste your time. Use the learning method. Take your bose remote and put it on a flat surface and point it toward the little square receiver on the dish remote (located on the top left side). Then press the "aux" mode button on the dish remote until all the mode buttons light up and the aux mode light starts to blink. Then press the record button on the dish remote for 3 seconds until the aux mode button lights up and stays lit (it then stays lit during the whole learning program). On the dish remote press the button you want to learn but don't hold it down (I started with the up volume) . Then press the corresponding button on the bose remote but hold that down until the aux mode button blinks once and comes back on (if the mode button blinks three times the dish remote did not learn the command and you should try changing the batteries on the dish remote if it happens repeatedly that it fails to learn). Program the remaining commands by repeating the process of pressing a button on the remote, then pressing and holding the corresponding button on the bose remote. Don't be afraid to do it with the mute and the power buttons too. During this process if you don't press a button for more than 30 seconds it will time out and nothing will be recorded and you will need to start again. To end the programming press the aux mode button. When you are using the bose solo using the dish remote you just need to remember to press the aux mode button first so it flips to command the bose solo.

Dec 30, 2012 | DISH Network IR Remote Control

2 Answers

Three digit code for ilive sound bar


Hi Scott, my name is Cheri Torres and I work with the DISH Network Internet Response Team. I came across your post and wanted to help! I will list here for you the best code for your iLive sound bar and also the instructions for addressing the remote to your sound bar. I hope you find this information useful and if you have further questions please let me know!

The best code 2835

The instructions for addressing the remote.
1. Press and hold down the AUX button until all the other mode buttons light up.
2. Enter the code 2835.
3. Press the pound(#) button once.
4. Test the functionality of your iLive sound bar.

Jan 18, 2012 | iLive Itp180b Ipod(r)/iphone(r) Speaker...

1 Answer

Wanting to program my dish network remote to control my vizio sound bar. The dish remote is a 5.4 IR and I can't find vizio in my manual. Is there any way to do this?


I don't show we have any codes for the Vizio sound bar. Have you checked your Visio manual for the code; I know that Vizio TVs provide codes for different providers. If you still can't find a code, I have provided instructions on how you can perform a power scan for programming the remote.

Address To Other Equipment Using Power Scan
  • Remote: All Remotes (except Basic)
    1. With the desired equipment on, press and hold the correct Mode button until all mode button back lights illuminate, then release.
    2. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device
      Then Press STAR (*)
    3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
    4. Press the POUND (#) button. Note: If the code entered is valid for the remote, the mode light flashes three times.

Aug 15, 2011 | DISH Network IR Remote Control

1 Answer

I want to program my Magnavox TB110MW9DTV Digital analog converter box to the aux button on my Dish network 4.0 IR/UHF PRO remote. I can't find a code to program this. I have talked with Dish and I have...


Hey there, Cheri Torres with DISH Network Customer Service here. We unfortunately do not have any codes for our DISH network remote controls that will program a Magnavox digital converter box. An option you can try is a power scan which will basically find the code for you in some cases. I will list here for you the instructions for addressing your DISH remote to your converter box. I hope you find these instructions helpful and if you have any other questions feel free to post back here and I would be happy to help.

Instructions for performing a power scan
  1. With the desired equipment on, press and hold the AUX Mode button until all mode button back lights illuminate, then release.
  2. Press and release the # 2 then the STAR (*) button.
  3. Press and release the Power button.
  4. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
  5. Press the POUND (#) button as soon as the desired equipment powers off. Note: If the code entered is valid for the remote, the mode light flashes three times.

Apr 09, 2011 | DISH Network IR Remote Control

3 Answers

Need dish code for remote for vizio soundbar


Hey there, this is Cheri Torres with DISH Network customerservice. I wanted to see if I could help you with the question you posted aboutthe Vizio sound bar. I was unfortunately not able to find any codes for theVizio sound bar. Another option you can try is running a channel scan to findyour code that will work best to control your sound bar. I hope that theseinstructions are useful to you. If you have any further questions or concernsplease feel free to post back here or email me at Cheri.Torres@Dishnetwork.com.

Remote: All Remotes (except Basic)
    1. With the desired equipment on, press and hold the correct Mode button until all mode button back lights illuminate, then release.
    2. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device.
      Then Press STAR (*)
    3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
    4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Dec 27, 2010 | DISH Network IR Remote Control

1 Answer

I have a Philips sound bar and I need the code to add it to my dish network remote


It would be our pleasure in assisting you with this. Pleaseknow that the code provided will only work with either the 20.0 or 21.0remotes. We want to start with pressing and holding the AUX button located onthe top of your DISH Network remote control until all mode button back lights come on, then release. Once the AUX button is blinking, on the numberpad enter 2* then anyone of these codes: 733, 640, 685, or 725. Once thecode as been entered, press the pound (#) button. Check that the code works by trying several differentfunctions on the remote to make sure it properly operates your Philips soundbar. Keep in mind that some codes may not be compatible with your equipment.

We hope this helps, and thanks for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Support Representative

Dec 09, 2010 | Philips Code Free DVD Player

1 Answer

DWIN tv, Marantz receiver and Dish system. Three different remotes needed to control. One for On/Off of the tv, one for the volume and the third for the Dish network. What is the best way to get to one...


Youdo have the ability to program your current DISH Network remote to all of yourcomponents. If you decide you would like to do so, I have included instructionsto assist you in programming your remote. In order to program your remote toyour DWIN television without the remote code, (I'm sorry unfortunately I wasunable to locate a remote code for a DWIN Tv L) you can complete what we refer to asa "Power Scan," to do this you would complete the following steps. 1. Withthe desired equipment on, press and hold the correct Mode button until all modebutton backlights illuminate, then release. (In this case the mode button willbe "TV") 2. Pressand release the Power button. 3. Pressthe Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, theequipment will power off. 4. Pressthe POUND (#) button. If the codeentered is valid for the remote, the mode light flashes three times.

-In addition, you can also program the remote to yourMarantz receiver this can be done by pressing and holding the AUX botton inupper left corner of remote next to the SAT button.
-Press & hold AUX until all the other mode buttonslight up, then release AUX button, all the other mode buttons should turn off,only AUX button should be blinking now,
-While AUX button is blinking enter in the remote code742 for the Marantz receiver and then press the # key (pound key.) Afterpressing the # key on your remote, the AUX mode button should blink 3 timesmeaning the programming has been completed successfully. While still in AUXmode try any function on the remote, such as turning the volume up or down onyour Marantz receiver. The DISH Network remote should now be programmed tocontrol the receiver.
-If the 742 code doesn't program the DISH Network remotesuccessfully you can also try each of the following using the same procedures, 743,651, or 740. After completing the power scan to program the DISHNetwork remote to your DWIN t.v, & completing the AUX mode buttonprogramming, the remote should now work for your TV to powere on and off, theMarantz amplifier- to control the volume, and the DISH Network receiver. Hopethis helps! -Kirstie DISH Network

Oct 04, 2010 | DISH Network IR Remote Control

Not finding what you are looking for?
DISH Network IR Remote Control Logo

2,668 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

Jaime Hernandez

Level 3 Expert

2317 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...