Question about Microsoft LifeCam VX-3000 Web Camera

Open Question

When I try to install my microsoft lifecam halfway through the installation the setup says i lost my connection and have to restart but my internet connection is 100%. What can I do?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 38 Answers

SOURCE: microsoft lifecam 1.4 does'nt respond

are you sure your microphone isn't muted?. Check your microphone volume setting by doing this:

Control panel > sounds and audio devices > click the audio tab across the top.

Under 'sound recording' , click volume. turn your volume up on the selected device. you may even need to change the selected device to the correct one. Play arround with that audio screen until you get it to work

Regards

Tony

Posted on Feb 28, 2008

Ad

SOURCE: LifeCam VX-1000-- Life Messenger won't install

wat if it wont install?

Posted on Mar 01, 2008

  • 1 Answer

SOURCE: i lost my installation cd of touchmate webcam, where can i download easier installer here?

wil u pls send me a pc suit .......
model no:TM-CAM110

Posted on Oct 06, 2008

yooperbud
  • 8637 Answers

SOURCE: installation problem with microsoft lifecam 2.04

Try disconnecting the camera from the USB port and reinstall the software program. When the program asks you to connect the camera, then do so and not before. After the program finishes it should properly. Don't forget that you will then have to have a messenger or Skype to communicate with family and friends. Here is how to set thst up:
Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this is of some help. Bud

Posted on Jan 11, 2009

  • 14 Answers

SOURCE: Microsoft LifeCam 2.07 installation error

Hello

First of all check the minimum requirements(hardware , like RAM , processer etc.) to install the software .

Second , check are you logged in with the administrator rights.

Third , check if camera software is compatible with your current operating system.

I hope it will help.

Posted on Jun 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Microsoft LifeCam VX-1000 Model 1080. Unfortunately I lost my installation CD Rom. Please guide me how can I free download from internat.


i lost the cd whit driver,i took the driver from internet but during downloding the files my pc is restarting.what can i do?

Feb 16, 2011 | Microsoft LifeCam VX-1000 Webcam

1 Answer

How can i install my webcam (microsoft VX-3000) if i lost the CD ?


Hi there,
You can still download the drivers from the links below for your windows
For Windows 7 LifeCam 3.2 32-bit and 64-bit for Windows 7
For Windows XP (32-Bit) LifeCam 3.2 32-bit for Windows XP SP2 or higher (excluding 64-bit)
For Windows XP (64-Bit) LifeCam 2.04 for Windows XP 64-bit
Download the drivers, unplug the camera from the computer and run the setup Lifecam3.22.exe, Install the drivers and follow on-screen instruction, Within the setup it might will prompt you to plug in the camera, connect the camera and the drivers will be loaded automatically and you will need to restart your computer once,
If you require more assistance, feel free to reply to this post
Thanks For Asking FixYa! Regards-BA

Jan 28, 2011 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

Hey there, I just purchased the web cam today, and when I insert the installation CD it says that setup cannot continue because there is no internet connection, but there is. I've tried just about...


Visit the Microsoft hardware support page
http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001
Fill in the details and click 'GO'
Click on the link:-
"Microsoft LifeCam Readme and Troubleshooting Information"
All the information you require should be found here, Including the latest software to download and Customer Support
Check out any additional software you have to download as well as the Lifecam software.

Procedure
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Microsoft
Run the installer and choose your options when prompted
Connect your webcam when prompted.

Sep 05, 2010 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

When i open the setup it is telling me to make sure i am connected to the internet even though i already am


Visit the Microsoft hardware support page
http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001
Fill in the details and click 'GO'
Click on the link:-
"Microsoft LifeCam Readme and Troubleshooting Information"
All the information you require should be found here, Including the latest software to download and Customer Support
Check out any additional software you have to download as well as the Lifecam.

Procedure
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Microsoft
Run the installer and choose your options when prompted
Connect your webcam when prompted.

Aug 16, 2010 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

Lifecam 600 wont install


Checkout Microsoft support - you can also download the software from here
http://support.microsoft.com/search/default.aspx?query=lifecam+vx-6000+driver&catalog=LCID%3D2057&mode=r

I could not see a lifecam 600 only Lifecam NX-6000 and Lifecam VX-6000

Aug 31, 2009 | Microsoft LifeCam VX-6000 Webcam

1 Answer

Trying to install the software for Microsoft Lifecam 1.4


If you're installing a USB webcam don't connect a cable before installing drivers. So, run setup from CD continue with install sometimes in the middle of installation it asks you to connect webcam to USB, do it and finish setup. If it's not asking you to connect Webcam, first finish setup and than connect Webcam. Good Luck!

Apr 26, 2009 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

IM HAVING TROUBLE INSTALLING THE LIFECAM VX- 6000 SOFTWARE!!!


Hi,

I suggest that you uninstall the software of that cam first. Find it in the Remove/Install Programs then remove. Next go to Program Files and find the installation folder, delete it. Then download this program:

http://www.howtodrivers.com/model28830.html

and install it


Mar 22, 2009 | Microsoft LifeCam VX-6000 (68C-00001)...

1 Answer

Lifecam vx1000 not working after installation.


Make sure that the camera is plugged in and that the software is actually installed(check your start menu for Microsoft Lifecam).

If you didn't restart after you installed the software do that.

Go into My Computer and look in there for an icon that is labeled something like Microsoft Lifecam vx-1000. If you see that, you are connected to the camera -- its plugged in. If you don't see it, plug it into different usb slots. You can try to Open (double click) the Microsoft Lifecam VX-1000 icon to see if it starts a video feed.

Run the software and see what happens, I believe there is a setup wizard that will help you configure some things.



Dec 30, 2008 | Microsoft LifeCam VX-1000 Webcam

Not finding what you are looking for?
Microsoft LifeCam VX-3000 Web Camera Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2727 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...