Question about JVC Televison & Video

1 Answer

Jvc lcd. i set sleeptimer to turn off. now it wont turn back on.

Posted by on

  • 2 more comments 
  • smoothscorpi Nov 09, 2010

    unplugging did not work. Tv is a JVC 47" lcd. 2 years old. # lt47em59

  • smoothscorpi Nov 09, 2010

    unplugging did not work, i agree it is probaly not a sleep timer issue. The TV is a JVC 47" LCD. It is 2 years old, # LT47EM59.

  • smoothscorpi Nov 10, 2010

    No i am not going inside TV. when i hit the power button , the light stays on 4 30 seconds. Then it starts blinking. there is just a blank screen when the power light is on, then u can hear it switch off.

  • smoothscorpi Nov 10, 2010

    i have a older TV that has the same problem it is bliking and won't reset. they were both hooked up to the same surge protecter. there r other devices in the same surge protector that were not affected. there were no storms over the weekend, but i have bought a new surge protector. Zip is 77071.

    thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Hi,
First off what is the make and model of the tv and how long have you owned it? If you haven't already try unplugging it for a couple minutes and plugging it back in. Then see if it will turn on. Most likely the issue you are having is totally unrelated to using the sleep timer.
Thank you,
Lee

Posted on Nov 09, 2010

  • 1 more comment 
  • Lee A.
    Lee A. Nov 10, 2010

    Are you planning on attempting any repairs yourself. You may need to end up taking the tv apart and checking for any bulged capacitors and then using a multimeter to check for voltages. If the tv won't turn on at all first thing to look at is the power supply board.
    Thank you,
    Lee

  • Lee A.
    Lee A. Nov 10, 2010

    There is definitely a problem inside the tv. If you give me your zip code I would be happy to assist you in finding someone to give an estimate/repair the television.
    Thanks,
    Lee

  • Lee A.
    Lee A. Nov 10, 2010

    Ok, and just to make sure did you try plugging the tv directly into the wall and you had the same problem? Here are a couple tv repair companies in your area:

    http://jandkelectronics-px.rtrk.com/

    http://www.bammeltv.com/

    If you need any further assistance please let me know.
    Thank you,
    Lee

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my Jvc the screen won't power on. When I reset it the lights on the buttons light up...but shut off right away. It has power because the red light on the bottom left corner stays lit.


JVC LT-46AM73 LCD TV Won't Turn On - YouTube

? 3:28
https://www.youtube.com/watch?v=y5j3RGUe4gM
Feb 25, 2015 - Uploaded by Awesome Things
JVC LT-46AM73 LCD TV won't turn on after power outage. ...LCD & LED TV Repair - No Image & Blank Black ScreenFlashlight Test - How to ...

JVC wont turn on - JVC - Streaming Video & TVs

www.tomsguide.com/answers/id-1677424/jvc-wont-turn.html
May 15, 2013 - JVC lcd tv will act like its turning on then the green light after 2 seconds ... wont turn on Forum; SolvedAcer Laptop V4DA2, screen won't turn on.

My Jvc Av-32F476 Tv Won't Power On, The Green On Timer Light Stays ...

www.diyforums.net/my-jvc-av-32f476-tv-wont-power-on-the-green-on-...
Dec 8, 2013 - My jvc av-32F476 tv won't power on, the green on timer light stays on and m. ... On the remote control, look for the buttons PICTURE MODE and DISPLAY, with ... My Jvc Lt24dd52j Won't Turn On The Blue Light Is Flashing But ...
Nov 1, 2014
I Have A JVC LT-42TG30J, Randomly The Tv Has Decided It ...
Aug 29, 2012
I Have No Picture On My 47 Inch On My Jvc Big Screen Just A ...
May 23, 2012
My Dynex 42" Wont Turn On Power Led Is Lit Up But It Won't C ...
May 24, 2011
More results from www.diyforums.net

Jan 18, 2016 | JVC Televison & Video

1 Answer

Why wont my techwod l.c.d 37inch t,v wont switch n from standby


Go to the sitting chaik the Sleeptime and reset all setting other wise sleep mode chaik

Aug 31, 2014 | Televison & Video

1 Answer

How do i connect my jvc camcorder to my lg recorder


These instructions should be very similar to hooking up to your lg recorder Hope this helps

Instructions
    • 1 Plug the white and red audio cables into the left and right Audio OUT ports on the back panel of the DVD player. The ports should be color-coded white and red as well, but if not, connecticon1.png the white plug to the left audio and the red to the right.
    • 2 Connect the yellow plug to the Videoicon1.png OUT port on the DVD player.
    • 3
    • Plug the other ends of the three cables into the matching composite AV IN jacks on the back of the JVC LCD TVicon1.png.
    • 4 Turn on the DVD player and the JVC set, then press and release the "Input" button repeatedly on the TV remote control until the DVD screen appears on the LCD panel.


Read more: http://www.ehow.com/how_6647268_hook-player-jvc-lcd-tv.html#ixzz303ZGkASL

Apr 26, 2014 | Computers & Internet

1 Answer

Jvc tv wont turn on it only displays" retreiving data"


If it displays something it is on, try to remove power from the set and a BOX if being used for a while and then power both back up.

Dec 14, 2012 | JVC Televison & Video

1 Answer

My flat screen tv wont turn on...what does that mean?


most likely your set has an internal failure and will need to be serviced. You can try unplugging it for a while, then plugging it back in to see if it will power up. But it is possible that you have a failure on your power supply board or the main board.

Sep 02, 2012 | JVC 42 in. LCD TV

1 Answer

JVC 32-EX38 LCD TV NO SOUND


You could of course have a audio circuit problem with the set but there are some things to look at first.

1. does set have sound when a DVD etc is connected via a rear audio/video input? This will narrow things down somewhat.

2. are the speakers in the audio menu turned ON or OFF?

3. are you using a cable or sat box or a receiver in line for signal?
If so unplug each for a while and plug back to allow them to try to reboot.


Most of the JVC sets that are LCD the entire audio circuit is on the main board--one of the most expensive boards in the set.

Jun 03, 2012 | JVC Televison & Video

3 Answers

Newer Jvc tv wont turn on


1. hold the [vol-] and [menu] button.
2. while holding those, press the [power] button and let go of the [power]button only
3. wait 5 seconds then let go of [vol-] and [menu]
4. wait for a while(approx 30secs).....do you get a picture

This works for the JVC models that end in "9" and end in "0"

May 25, 2009 | JVC LT-40X776 40 in. LCD HDTV

1 Answer

Screen goes black tv stays on. Turn off and on and TV's fine.


I had this problem on my 42" Philips. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.

The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.

My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.

Hope this helps, may not apply to your situation.

Mar 20, 2009 | Philips 42PFL3603D/27 42 in. LCD TV

2 Answers

Jvc av-32fa44 television


My JVC AV-32FA44 wont turn on. the on timer light blinks. When i unplug it and plug it back in i get beeping (i stoped counting at 50 beeps) then it stops and the light just blinks.

Jan 12, 2007 | JVC AV-32FA44 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74377 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...