Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

Kodak 5300 printer

My Kodak 5300 printer won't print properly in color. It only prints blue. I just changed the color printhead and deep cleaned and calibrated it. What have I done wrong?
Barbara

Posted by on

  • 1 more comment 
  • bowilsonj Jul 10, 2008

    I just changed my color cartridge and the color comes out more green/blue . How can I adjust the color? I have tried the brightness,did a test page,cleaned the print head and calibrate the printer.I did not change the black because it was not empty.Even the colors on my test page were not as bright as they should have been.Mary

  • Anonymous Jul 12, 2008

    I've had the 5300AIO for about 1 year, just about 2 weeks ago I starting having problems with my printer. Contacted Kodak 5 times, they

    sent me a new printhead , I installed the new head some success. Unable to run Kodak AIO home center and scanner. Ready to smash this thing

  • theladysgirl Dec 14, 2008

    colar isnt right it looks like **** dall it wount print on paper it prints parts of things but not all

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

1-Deep clean and calibrate the printhead
2-Try a firmware update @ www.kodak.com/go/downloads
3-Try a removal and reinstall of the printhead and inks
If all this fails, call Kodak Aio support : 1-800-421-6699 (USA)

Posted on Jul 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My KodakEasy Share 5300 will not print in black.


92b8b47.jpgThe Kodak AiO printers 5000 series and ESP series PRINTHEADs has orange protective cap that need to be remove to fit on the printer carriage. For the ink cartridges 7b91cbc.jpgthere is also a orange protective cap.
Issue that its not printing black and deep clean and removing the printhead and reinstalling the printhead (reseating printhead) is already done and still no black when printing. The printhead should be replace. For futher assistance call 1 800 421 6699 Kodak AiO printer support line

Nov 16, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Blue pics on kodak 5300


Kindly reseat the cartridges 2 times and then close the access door .Click on Menu on the printer and scroll down and choose Clean printhead and select "deep cleaning"
Print a demo sheet after the cleaning process has been completed. If ur issue persists, Call Kodak @ 1800 421 6699 and they will replace printhead of the printer free of cost..
Printhead is the part which takes the ink out from the cartridges. Probably the printhead of the printer has gone bad.

Nov 14, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My printer will not print in black and white. i have already cleaned the print head and that changed nothing. my printer is a kodak easy share 5300


have you done the deep cleaning?If yes Please try also to Calibrate the printer.

Now if this solution did not solved your problem it means the nozzles of the printhead that you are using is already clogged Please call kodak for Printhead replacement Toll Free 1 800 421 6699

Nov 03, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak 5300 prints light or not at all color does better


to resolve the problem try to clean the printhead first, to clean the printhead just press on the menu button, select clean printhead, select deep clean.
After you clean the printhead try to re-calibrate the printhead, just go back to the menu the select calibrate printer then select print calibration page. Once you have the calibration sheet, place it on top of the scanner make sure that the blue arrow on the printout is pointing on the yellow arrow located on the top corner of the scanner glass then press on the start button to scan the calibration page. Once the calibration is complete try to make a test print, just go back to the menu then select print demosheet then press ok. If this will not correct the problem you need to call their technical support hotline

Aug 25, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printer will only print in purple/pink,enstalled new colour cartridge configured as required,still no change. help thank you


Print out a calibration sheet, either from the menu, or press photo and cancel at the same time. Your calibration sheet is probably missing a color. You should have black, blue, yellow, and magenta(pink). If you're missing any of these colors, your printhead is clogged. Try doing a printhead cleaning. Print another calibration sheet, if the color is still missing, you need a new printhead. Call Kodak.

Sep 30, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printer does not make black copies, it will print colored copies but not black kodak 5300 aio printer will not print in black. ink cartridge new.


Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Aug 26, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Kodak 5300 printer


Here are the things you will be asked to try if you call support. They may fix the problems as well. Taking the printhead out and putting it back in is the big helper.

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
(If this is a 5100, do it in the home center ->? in the top right ->Maintainence ->Clean Printhead.)
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Aug 12, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak 5300 print quality


The problem is in your printhead in which the cartridges sit on.

You will need to contact Kodak for a replacement print head. Once replaced this will correct your issue.

Thank you. - Go Columbus BlueJackets!!

Jun 28, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Ink pooling on phot paper


1-Deep clean and calibrate the printhead
2-Try a firmware update @ www.kodak.com/go/downloads
3-Try a removal and reinstall of the printhead and inks
If all this fails, call Kodak Aio support : 1-800-421-6699 (USA)

Jun 22, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak 5300 not printing colors


Kodak told me to take the printhead off and reseat it several times, which I did. I then deep cleaned it, calibrated it, and replaced the color cartridge. It didn't solve the problem. Kodak will replace the printhead for free, and after I return the defective one, will send me a free color and black cartridge. Very nice service. I've been very happy with the 5300.

Mar 09, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...