I would like to pair my Bluetooth H721 but I need the password? and do not use it can you guide me

No. Most mono Bluetooth headsets cannot play music. You need a stereo bluetooth headset or a wired headset.

Mark
Motorola Support

Turn on the headset's bluetooth, then use your phone to search the device, and follow the guides, it should work.


electronics wholesale

Maybe it is not compatible with iPhone.
Buy a new one.

electronics wholesale

Go into the phone and remove the H721 from the bluetooth choices (if it's there.) Turn your phone OFF, then back ON. Then try to pair them again.

Open the boom flip on your headset. Once open, press and hold both volume buttons and the call button on Motorola H721 for more than 10 seconds. The indicator light will flash blue three(3) times and then become steadily lit. The headset is now in pairing mode.

Press and hold both volume keys and the call key on your headset for some 10 seconds, until the indicator led lights steady blue. This will clear all pairing informations stored on it
Your headset works like this: if it is turned on, and doesn't find a paired device within its range, it enters pairing mode again. So, once it is paired, e.g. to your phone, make sure the phone's bluetooth radio is on, prior to turning the headset on.
Hope it's the kind of informations you were looking for.
Cheers! Carlos

Hi,
If you never set a passkey for the Bluetooth it should be 0000 or however many digits it is. I'm not exactly sure0.
Please refer back to me for further help if needed. Thanks!

0000

thats it
hope this helps

thank you
jm

try 0000 or 1111

I actually have both products, and I was able to get my bluetooth to work with 2 phones. All you have to do is first pair your phone with the H721. Then in the phones functions, turn off the bluetooth so it is no longer in discovery or connected...but do not turn off the bluetooth itself, just in the phones settings. Then go to the bluetooth settings in the iphone. you should see the H721 in discovery but not connected. Before connecting it you must put the H721 into discovery mode as well. Hold all three buttons down for 19 sec. it will go solid blue. then push connect on your iphone. onces connected, go to the original phone and turn the setting back on for bluetooth connection. both are now connected. Only one may apear to be connected, but both are. test it with another phone. call each number and you will see that you can now answer both calls with one device. If the iphone is connected and phone 1 rings...the H721 disconnects temporarily from the iphone and connects to the other device to answer it. Hope this helps. Cause thats how I got mine to work.