Question about Minn Kota Deckhand Electric Anchor Lifts Deck Hand 25

2 Answers

Anchor will not go down but will go up - Minn Kota Deckhand Electric Anchor Lifts Deck Hand 25

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have two deckhand anchor units. I ve tested both on battery, and both went up. I replaced switches, and I get nothing, but I heard a light click coming from unit. Is the motor bad?

Posted on Mar 08, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you try to check the interrupter. I had a similar problem when then i took a flat head screwdriver and pushed the interrupter towards the bow of the boat (towards the anchor and spring) and it worked properly. At least until the next drop in which I needed to reset the interrupter again. I am not sure why there is an auto stop for lowering the anchor when resistance is low, I believe the unit should have an auto stop for too much drag when raising the unit. That would make sense to me for if the anchor is attempting to enter the deckhand housing and doesnt stop to prevent the anchor from breaking the deckhand or if there is a HUGE snag with attempting to raise the anchor and the anchor is too stuck on the bottom to prevent the boat from undergoing too much stress from a unretrievable anchor.

Posted on May 22, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot fold down my rear seat to access the child seat anchors. is there any way to release the rear seat from the boot?


Child Seat Restraints - FSB Forums - FullSizeBronco.com

www.fullsizebronco.com/forum/23.../182333-child-seat-restraints.html
Sep 22, 2010 - My rear seat hasnt been mounted in 6 years and my son Wyatt has ....Join Date: Oct 2006 .... Tether Strap Anchor Attachment for the Second Row Center Seating ... With the rear seat folded forward, remove the bolt retaining the rear ..... If you can't track down the part, send me a PM and I will get my Ford ...

Solution for car seat anchor tether - Tundra Solutions

www.tundrasolutions.com/.../119126-solution-for-car-seat-anchor-tether/
Dec 11, 2007 - I have a 2004 Tundra and I just installed a forward facing convertible carseat. It's almost impossible to get the tether strap attached to the ...

Child Car Seat Fitment in Trucks ' IH8MUD Forum


Dec 02, 2015 | 2006 Rover 75 Connoiseur

1 Answer

What is an orthill anchor?


you probably meant a northill anchor.
this is an anchor made of 2 blades that look like plows and are mounted to a shank. as well, there is a folding stock crossing through the anchor's drown. this type of anchor was invented to be used for seaplanes.

Feb 18, 2013 | Boating

1 Answer

Can I drop anchor anywhere in St. John?


You can drop anchor in every bay around St. John except for Cruz Bay because there is heavy traffic there due to the ferries coming in and out. However, it is important to note that you can only do so for a number of hours and not overnight without paying a small fee. This is because they are national parks that the island is trying to keep less crowded. By charging a small fee, it keeps the traffic in these bays down.

Jan 14, 2013 | Boating

1 Answer

I bought a 2004 mercury sable i notice the back seat it dont have the seat belt snap that click but on the top of the seat is like a anchor


The anchor points that you describe are on all late model cars. They're made for attaching baby car seats without using seat belts. Your car should have both the anchors AND seat belts. Most likely, the lower seat belt latches have beeb pushed down into the seat. Fish around with your hand and you should find them.

Good luck.

Feb 19, 2011 | 2004 Mercury Sable

2 Answers

Why does expat shield no longer work in order to receive bbc iplayer.


Usually what has happened is that the Beeb blocks the ip#'s that anchor uses. Anchor then does a change and it shows up as ip#'s outside of that range and it works again. Until the next time.

I think the longest I have had anchor down was a bit over two weeks. Usually it is off for a day or so every few weeks. Just keep trying Anchor is are pretty good at getting it working again quickly.

Feb 02, 2011 | AnchorFree Expat Shield

1 Answer

Anchor pulls up won't release to go down on either of the two switches


Im getting power to motor, but can't get it go down. When I hit switch I can hear a clicking sound from the unit

Nov 05, 2010 | Minn Kota Deckhand Electric Anchor Lifts...

2 Answers

How do you anchor the dishwasher so it doesn't move around? There are no brackets on the front to anchor to the counter.


Open the door and look at the top edge of the washer. It should have 1 or 2 small straps to screw down to the cabinet. If no straps look for small holes to screw a piece of metal strap to the cabinet.

Nov 02, 2009 | Dishwashers

1 Answer

Removing sharp R1831 over the counter convection microwave


the two long rectangular rod should slide down 1" to 1.5" unlocks the back plate and then it will slide forward and come off the wall.. hope it helps

Sep 19, 2009 | Microwave Ovens

1 Answer

I need fan/heat sink anchors for 775 cpu. nylon tips broke off letting fan pull away from cpu can I buy the anchors only. desk pc is custon built.


If you have another heat sink laying around, perhaps in an old computer you don't use? Try using the anchors from that.

I have also had success mounting fans to heat sinks using wire ties. Not sure that will work with your problem though because it seems you're talking about the actual gadget (usually a piece of metal) that locks the heat sink down onto the CPU.

Aug 23, 2009 | Computers & Internet

4 Answers

Shoulder straps


You can contact EvenFlo directly, they will be happy to help you out: http://www.evenflo.com/ Evenflo ParentLink Department: 1-800-233-5921

Mar 31, 2007 | Evenflo Aura Traditions Travel System...

Not finding what you are looking for?
Minn Kota Deckhand Electric Anchor Lifts Deck Hand 25 Logo

Related Topics:

928 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minn Kota Boating Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14584 Answers

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Are you a Minn Kota Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...