Question about AT&T DECT 6.0 Cordless Phone System with Digital Answering Machine

2 Answers

One of my cordless phones says not registered. How do I fix that? Also, another phone says check battery. Where can I get another battery? Warranty?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Put the non-registered handset in the master base unit. Unplug the base unit for about 10 seconds and plug it back in. Wait for a message to change on the handset and press and hold the handset locator button for 4 seconds. This will re-register the handset. Do not remove the handset from the base while performing the above steps. Good Luck!

Posted on Nov 12, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Handset for a cordless phone does not transmit or receive a signal to and from other hadsets or other phones.

Posted on Aug 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phones base and cordless have been plugged in since yesterday and I've checked all batteries and connections. Do I need to register with vetch before I can use the phones?


No - do you have the base connected to a landline? - Does the phone display show check tel line? I am assuming this is your typical home cordless phone. Is there power to all the handsets? If the screen is blank - you may have a bad battery. More information would help.

May 02, 2017 | Lands Phones

1 Answer

My vtech phone say not registered and see manual #cs6114


General - Product Troubleshooting - VTech® Cordless Phones

www.vtechphones.com/support/.../35/178

VTech Communications Inc.My handset displays Not Registered. ... If PRESS FIND HS 4 SEC ON BASE does not appear on the screen after a few seconds, lift up handset and recradle it in ...

My vtech phone says not registered and not sure why ... - Fixya

www.fixya.com/support/t10092346-vtech_phone_says_not
Aug 13, 2011 - my vtech phone says not registered and not sure why and how come? can ... See page 26 of the manual for detailed instructions on HOW TO ...

My vtech dect 6.0 phone says not registered how do i fix it ...

www.fixya.com/.../t7993579-vtech_dect_6_0_phone_says_not_registere...
Jan 26, 2011 - my vtech dect 6.0 phone says not registered how do i fix it - VtechDECT 6.0 ... If you click on the above it will take you through to the manual, hope i`ve helped .... See all Vtech DECT 6.0 Digital Cordless Phone Questions ...

vtech cordless handset, how to register - YouTube

? 3:21
https://www.youtube.com/watch?v=dV9rZ_cYcks
Feb 22, 2015 - Uploaded by Brian Williams
My phone says no line plz help me. Been without a ... VTechuser manual had no instructions to set up an ...

[PDF]User's manual - Vtp-media.com



Feb 10, 2015 | VTech Communications CS6114 - cordless...

1 Answer

How do I fix phone check base power out of range


Check power supply is connected properly at base unit.reseat handset on base to re register the phone.check battery on phone is charged and phone line is live.sometimes units have intercom buttons so see if you can activate the intercom from the base unit to see if base talks to handset.

Jan 19, 2015 | Uniden Cordless Phone

1 Answer

Why wont my cordless phone work no reception?


The cordless phones have to be registered to the base station (the part connected to the phone line). Perhaps they are not registered. Check you documentation for information on how to register them.

Jul 27, 2014 | Siemens Gigaset E455 Cordless Phone

1 Answer

Phone says searching


Bring the handset that says searching into the same room as the base and see if the handset stops searching. Next unplug the handset batteries (yes from all handsets) and the base power cord (from both the base and the wall outlet). Wait a few minutes and then reconnect the batteries and base power cord. Next try to de-register and then re-register the handsets. (If you add a comment with the phone model, I'll help you with this step. Uniden has the manuals for their phones on their site: http://www.uniden.com/bin/venda?ex=co_disp-view&bsref=uniden&scat=dectphones_mnl .)

If this doesn't help, next try a new battery (and make sure that the battery is fully charged) for the phone. (If the phone is under warranty, contact Uniden. Note: batteries lose their ability to hold a charge over time. This includes the time on the shelf in the package.)

If a new battery doesn't help, then there is something wrong with the handset. Decide if it is worth having the unit fixed if the phone is out of warranty.

I hope this helps.

Cindy Wells
(I'm assuming that both handsets are cordless. If you have a corded/cordless model, then check that the base has power before you go farther with the above diagnostics. The power brick should be warm. We had a cordless phone on a power strip (UPS) that got turned off. The handset was searching for a signal that wasn't being sent. If you have power to the base, try sending the Find Handset message. The problem could be either the base or the handset not sending and receiving the signals between them.)

Dec 11, 2011 | Uniden DECT 6.0 Cordless Phone

1 Answer

HOW DO U CONNECT THE HANDSET TO THE BASE.ALREADY TRIED THE REGISTER BUTTON,DID NOT WORK.IT CAME WITH NO DIRECTIONS,WE BOUGHT AT A FLE MARKET FOR 5 DOLLARS.


Are you sure of the model number? The D1680 should register the handset when you put it on the base for 30 seconds. (You should see Handset Registering followed by Registration Complete.) Then press Talk/Flash to check for dial tone. On this model if the registration fails, charge the battery (or replace the battery and then charge that). Then repeat the registration.
The manual for the Uniden D1680 is available here: http://news.uniden.com/pdf/D1680om.pdf .

For other Uniden phones, like the DEC1060, you need to navigate through the handset menus to find the Handset Registration command. Then press and hold the Register Handset (Find Handset) key on the base for 3+ secondsThen the base and handset will synch. (Low batteries could interfere with the process.)

For the D3288, you access the base menu for Register Accy and then press and hold # on the handset for 30+ seconds. (You will see Registering followed by Registration Complete.)


Additional Uniden cordless phone manuals are available here: http://www.uniden.com/scat/cordlessphones_mnl .

I hope this helps.

Cindy Wells
(with a flea market phone, my first suggestion is to try a new battery for the handset. They only have a given number of recharge cycles and you do not know the history. However, sometimes the chargers do fail and a new battery will not work. In that case, the phone should be replaced. It isn't worth the cost of out-of-warranty repairs.)

Jul 01, 2011 | Uniden D1680 Cordless Phone

1 Answer

Phone won't register


Try this,

remove the battery from each of the handsets that will not register for about 30 seconds. Reinstall, and try to register the handsets.

I had the same problem, and this is how I got it to register.

Reply back if this worked.

Jan 23, 2009 | Uniden Cordless Phone

1 Answer

Uniden cordless phones


Okay, this solved it for me, so maybe it'll help others.

Basically, you just need to re-register the phones by placing each one on the base unit and leaving it there for at least five seconds after the charge/in use LED light stops flashing.

According to the manual, it's necessary to re-register each phone after a power failure or if the batteries get very low or die. If you're experiencing the "connecting..." problem, this will probably fix it!

Mar 21, 2008 | Uniden Cordless Phone

Not finding what you are looking for?
AT&T DECT 6.0 Cordless Phone System with Digital Answering Machine Logo

Related Topics:

1,885 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Paul C.

Level 1 Expert

59 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...