Question about Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher
My Frigidaire Gallery dishwasher quit working and there was this clicking sound coming from it that would not go away until I unplugged it. Nothing appears to be stopped up and none of the control buttons works now. There is just this clicking sound. I am trying to figure out if it is just a broken part that can be replaced or if I need a new dishwasher. I am not a fix-it genius but do know enough to unplug it before working on it, if you can suggest what part I might need. Thanks!
The clicking sound is most likely the valve opening and closing. i would check the control board and the keypad. it's most likely the keypad, specifically the connector needs to be plugged into the board.
Posted on Sep 13, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Good Afternoon Jean, thanks for your inquiry!
I understand that your Frigidaire dishwasher is displaying an error code of "E R U O". From the code you provided it sounds like the code is "UO" which means the vent is open. This could be a possible issue with your vent assembly, wiring harness, or control panel. I would suggest checking the vent assembly to assure it is opening and closing. If the vent is working properly I would advise you to perform a reset on your dishwasher and you can do that by flipping the household circuit breaker off for at least ten minutes. If this does not resolve your issue I would recommend having a professional technician out to perform proper repairs. This will prevent you from purchasing unnecessary parts. -Matt
Apr 27, 2015 | Frigidaire Dishwashers
Thank you for your post, Jacques Lanthier!
From what you have described it sounds like you could have a loose or bad gasket on your Frigidaire dishwasher. Typically, to clean any seals you would remove them and wipe them off with a rag and warm water. If you continue to experience an issue with water leaking I would recommend replacing the gaskets. I hope this information has been helpful. -Matt
Jan 10, 2015 | Frigidaire Gallery FGHD2455LF Full Console...
If you select the Normal Cycle, twice during the cycleyou will hear the wash motor going on and off at amuch different cadence. The pump will pulse severaltimes, repeatedly turning on for less than a secondand off for 10 seconds. This allows it to drive soils off the filter and into the drain while using very littlewater. If, after selecting the Normal Cycle, you select either the Sanitize or Hi-Temp Wash options your dishwasher will understand that a stronger wash is needed and it will not use this pulsing routine
Jul 25, 2013 | Frigidaire 24 in. FDB1050REC Stainless...
Aug 30, 2012 | Frigidaire Dishwashers
Jan 29, 2010 | Dishwashers
Nov 12, 2009 | Frigidaire 24 in. FDB636GF Built-in...
Aug 12, 2008 | Frigidaire 24 in. FDB1050REC Stainless...
Nov 18, 2007 | Frigidaire 24 in. FDB1050REC Stainless...
Jul 12, 2014 | Frigidaire 24 in. FDB1050REC Stainless...
235 people viewed this question
Usually answered in minutes!