Question about Garden

1 Answer

Cannot loosen or tighten a loose impeller blade bolt on a ryobi leaf blower, rgbv3100

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

After taking the housing apart grab the opposite end of the impeller shaft with a good set of channel locks (my old standbys weren't sharp enough). Then while holding it tightly hit the old impeller blade with some sharp raps with a hammer, knocking the blade loose (hit the blade at a tangent, it loosens to the left like a regular nut and bolt). Once the impeller is loosened it can be unscrewed by hand and replaced.

Posted on Dec 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot get nut loose on impeller


might find that it's a left handed thread, as they often are.

May 12, 2012 | Ryobi Blower Vac 205mph Leaf Blower Or...

2 Answers

Having trouble getting old blade off my ryobi brush clearing attachment. Whats the trick?


Is definitely a left hand thread on the bolt...your machine came with a small rod to hold the head while loosening or tightening the nut which holds the blade....there is a hole and a slot in the machines head to insert the rod....if you've lost it you can probably use a small piece of drill rod about 5/16 diameter or a drill bit to hold it ...turn nut in clockwise direction and it will probably come loose....good luck !!! ;-D

Jul 12, 2010 | Ryobi 30 Cubic Centimeter Curved Shaft Gas...

1 Answer

RGBV3100 Ryobi removed carb. to install new fuel lines,now it will not start, acts like not getting neough fuel


try changing the fuel lines around and try again its easy to get the wrong

Nov 05, 2009 | Ryobi Garden

2 Answers

I just picked up a used ryobi rgbv3100 mulcher vacum blower ,it had no gas in it i put the oil gas mix in it ,followed the instructions on the blower ,but cant get it to start ,any ideas on what i can do?


test for spark.
while spark plug is out - put finger over hole see how much compression there is.

If good spark - look for holes in fuel line.

Jul 06, 2009 | Ryobi Garden

2 Answers

How do I replace the blower Fan Blade on my HOMELITE blower. How do I hold the shaft to keep from turning while loosening the nut?


you take a screw driver and put it in between the flywheel fan teeth then unbolt the fan bolt for the inpeller

Apr 25, 2009 | Homelite Consumer Products MightyLite...

5 Answers

Changing the saw blade on a Ryobi Mitre saw


There may be a push button type blade lock, and on many of these saws the retaining bolt for the blade is backwards threads, e.i., looking at the top of blade retaining bolt, turn it clockwise to loosen. This would normally tighten, but in the case of many of these saws, it loosens it.

Jan 04, 2009 | Ryobi ZRTS1342L Factory-Reconditioned 14...

Not finding what you are looking for?
Garden Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

10993 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...