Question about Euro-Pro 9105 Computerized Sewing Machine

Open Question

Power cord and foot peddle

Can you help me? When I moved I lost my power cord and foot peddle. Can I order another. It's for a euro-pro sewing machine model 9105 bought back in january 2004.
Thanks, Penny Bucher
rudidude2@hotmail.com

Posted by on

  • pp11 Jun 16, 2008

    my number on my euro-pro 9105 sewing machine is mach # 00007332 is that the right number or where would I find this make? I did take the panel off the bottom and does not have any information.

    Thanks Penny

    rudidude2@hotmail.com

  • pp11 Jun 22, 2008

    I looked at the motor on my euro-pro 9105 sewing machine to replace my power cord and foot peddle. I found the letters and numbers RS-775SH & Tn112x07 will that help and if not what are my options to get this fixed.

    Thank you for your help,

    Penny Bucher

×

5 Suggested Answers

  • 3422 Answers

SOURCE: Euro Pro 9105 won't catch bobbin thread

Hi,

first of all make sure you have the needle in the correct way round, flat side facing back, try a new needle, it only has to be slightly bent or blunt and it will miss stitches, the tension unit is the small piece near the takeup lever and it only has a small spring but that has nothing to do with the threading picking up, if the machine misses stitches after trying the above then you will need to retime the machine either bu a shop or by yourself, if you are sewing on fabric that collects static such as knitted fabric make sure you use an anti-static needle otherwise it will miss stitches.

Goodluck..

Posted on May 23, 2008

  • 1 Answer

SOURCE: I need a foot pedal

so do i, let me know if you find one, or which brands will fit.

Posted on Jun 17, 2008

SOURCE: replacement foot pedal and wiring for Euro Pro

Here's a place that carries all the pedals. Many are used by various brands, and go under different names for different machine companies. The euro-pro manual has the manufacturer's name and the model #, or you can browse the drawings of pedals to match your own. My euro-pro 9110 uses a model also used by viking and huskevarna. This place carries the cords as well.
Good luck.

http://sewingmachine221sale.bizland.com/store/page36.html

Posted on Jul 26, 2008

  • 1 Answer

SOURCE: help me find a manual for a euro pro 7133 sewing machine

Contact Shark @ 18003614639 they will send you a manual. They were very helpful and courteous.
may we all find some peace in thse manuals.

Posted on Nov 17, 2008

JeremySew
  • 65 Answers

SOURCE: Foot pedal for Euro pro 7132L

Hi Darlene,
I'm from http://sewingpartsonline.com and I guarantee you we have the correct foot control for your machine. All I need you to do is email us a digital picture of the spot on your machine that the foot control plugs into. Once I have this I'll direct you to the foot control you need to order. Our email address is on our website!

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I buy Euro Pro 7500 power cord and foot pedal combo?


check with these sites

sewingpartsonline.com

whitesewingcenter.com

sewingpartsdirect.com

sewingsupplieswarehouse.com

sewforless.com

sewvacdoctor.com

Sep 12, 2011 | Euro-Pro 9105 Computerized Sewing Machine

1 Answer

I AAM TRYING TO FIND A POWER CORD FOR THE SHARK 9105. I LOST MINE DURING A MOVE.


Sears PartsDirect has manufacturer-approved replacement parts and accessories for Euro-Pro sewing machines.

Jul 31, 2011 | Euro-Pro 9105 Computerized Sewing Machine

1 Answer

I have an euro pro shark 373 sewing machine, but during my move I lost the power cord / foot control. Can I find a replacement. Please reply.


CAll Euro-pro at 1-800-798-7395 and you can order one directly from them. Don't panic, just take a deep breath, it will probably cost about $35. but at least you will have the correct one.
Good luck and happy sewing

Sep 11, 2010 | Euro-Pro 373 Mechanical Sewing Machine

1 Answer

I have a shark euro-pro model 9110, i bought it from a seller on ebay, but didn't try to us it until the guant. was up. it only works when the for peddle is not pluged in? i took it to a repair center and...


Call Euro-Pro's customer service for sewing machines at 800-787-7395. They can walk you through some solutions and if nothing else charge a labor fee of $40 to service it. The Euro-Pro model 9110 is supposed to have a 25 year warranty so you should be able get it fixed without too much hassle.

Oct 30, 2009 | Euro-Pro 9105 Computerized Sewing Machine

1 Answer

Euro pro shark 7132l no foot pedal/power cord


Sewing Service shops often have old foot control pedals from retired machines, so widen your local search and don't just look at Europro, as a good tech will service all makes.

Aug 02, 2009 | Euro-Pro Shark 80 - 7133

1 Answer

I need a new power cord and can not find on anywhere


Call Euro-Pro at 1-800-361-4639, you can buy one from them. I had a problem with my bobbin holder and they sent me a new one within a week. I also ordered a set of 24 empty bobbins and the total cost with shipping was about $35.00.
Marge

Jun 04, 2009 | Euro-Pro 9105 Computerized Sewing Machine

Not finding what you are looking for?
Euro-Pro 9105 Computerized Sewing Machine Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Irene Tulloch

Level 2 Expert

449 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...