Question about Pass & Seymour 5410CC10 Black Feed Cord Switch

1 Answer

How to install Pass & Seymour 5410CC10 sp2 cord switch on a torchiere lamp? Can it be used the same as an sp1 switch?

Posted by on

1 Answer

The cord that runs to your light contains two wires.
The cord switch interrupts one wire.
The second wire runs uninterrupted between wall plug and light.

The photo below is not the same switch as yours, but it shows how one wire is interrupted and the other wire is uninterrupted.

How to install Pass & Seymour 5410CC10 sp2 - geno_3245_26.jpg

Which wire do you want to interrupt?
Look at the wall plug.
Is the plug polarized, where one blade of the plug is wider?
If the plug is polarized, then one blade is wide and the other is narrower.
Each blade of the plug feeds one of the two wires going to lamp.
Locate the narrower blade, and the wire that comes from that side of plug.
The narrow-blade wire is the wire you want to interrupt when installing the cord switch.

If the plug is not polarized, then choose one wire.

Posted on Nov 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vanity cabinet with lights needs power


Dimmer wires in series on either wire of the cord.

Nov 27, 2013 | Pass & Seymour Pass Seymour 90611WV 600W...

1 Answer

Installing two pole switch


Copy following link to help identify switch and wiring:
http://waterheatertimer.org/How-to-wire-switches.html#PandS
Add a comment and describe timer and wiring in detail.
Gene

Jul 31, 2013 | Pass & Seymour Pass and Seymour Decorator...

1 Answer

I'm want to install a toggle switch/outlet but have 2 white wires and 1 black. It's a Pass & Seymour 691-WCC6 switch. Can I install this switch?


More information is needed.
Unknown what wiring device was there before, and which wires were connected to which screw terminals.
Wire color is not as important as knowing what wire is for.
If both white wires were connected together before, then they need to be put back same way.
Separate wires. Turn on power. Test each wire to bare ground. Tester lights up on Hot wire. The Hot wire is usually black.
In back of box are white wires twisted together and covered with wire nuts. These are the neutrals.
Test black hot wire to neutrals and tester will light up. If box does not have neutrals, then device cannot be installed to code.

Open following link for illustration of wiring:
http://waterheatertimer.org/How-to-wire-combination-switch-outlet.html

Aug 01, 2011 | Pass & Seymour #660IGU 15A Ivory SP Toggle...

1 Answer

I have installed the Pass and Seymour combination GFCI and the test button disconnects the recepticles and the light remains on.


I believe the GFCI is only meant to protect the receptacle. Plig something into it and try the test button and it should work as expected.

Jul 07, 2011 | Pass & Seymour 1595SWTTRWCC4 COMBINATION...

2 Answers

Download older version of Avira Antivir


Why xp SP1??.

If you dont update your OS, even with the best Antivirus you will be in big trouble with security breaches/holes.

IF your copy of windows will not pass the WGA then you are out of luck with Avira . Avira needs SP2 so you could try AVAST, its min requirements are.
Processor Pentium 3, 128 MB RAM, 100 MB of free hard disk space
Microsoft Windows 2000, Microsoft Windows XP/Vista/7 (32/64 bit)

Jul 31, 2010 | Microsoft Windows XP Home Edition

1 Answer

Don't know how to fit the wire into the inside of the switch


Since there are only 2 wires, it doesn't matter which wire goes where. Either way it will work.

Apr 26, 2010 | Pass & Seymour #5410WBPCC5 White In Line...

1 Answer

Sp2 on dual core cpu


Please read and follow the article for your issue trouble shooting.

http://forum.notebookreview.com/showthread.php?t=60416






Thanks

~~~~~~~~~~~~~
Cyber_kaka
~~~~~~~~~~~~~

Nov 21, 2008 | Microsoft Windows XP Professional With...

Not finding what you are looking for?
Pass & Seymour 5410CC10 Black Feed Cord Switch Logo

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pass & Seymour Electrical Supplies Experts

ken skalski

Level 2 Expert

152 Answers

Ottoniel

Level 2 Expert

202 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Pass & Seymour Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...