How do I reset the time on my Citizen Eco-drive Skyhawk WR200, also I have never been able to set up the satelite support.

Arturs Kalnins

• 2338 Answers
• Posted on Mar 09, 2009

SOURCE: Citizen Eco-Drive Skyhawk JR 3060-59F

Paste this link into your browser and follow instructions:

http://www.citizenwatch.com/CUK/English/settings_int.asp?caliber=C650&interactive=C650

If this is not the correct caliber number, click on technical support tab in the same webpage and find the right one for your watch.
DO NOT FORGET TO RATE, PLEASE.

SOURCE: Setting the time on a Citizen Eco-Drive Watch

Go to this link and pay particular instructions on how to find your watches movement or caliber number.
http://www.citizenwatch.com/COA/English/settings.asp

SOURCE: setting time on my citizen eco drive skyhawk model jr3090-58l

I would like to set this watch for my son, and request help.

Bill

SOURCE: I cannot set the date on my Citizen SkyHawk Eco-Drive

The watch will automatically set the time and date when it is in receive mode (Mode hand is on CAL, TME, RXS) Pull crown out 1 click, turn crown to put mode hand in the ORANGE zone. push crown in. Set on stable surface with the 9:00 position facing the direction of the atomic clock signal. Push and hold lower button for 2 seconds till it beeps. it will enter RECEIVE mode and in 2 -15 minutes it will (if there is signal) update time and date automatically. While in RX mode the lcd windows will flash between RC & RX, the second hand should show signal level between 1 & 3 hr positions.
Do NOT move the watch until it has resumed the one second sweep motion and made a beep.

Janelle Schoonover

• 842 Answers
• Posted on Jul 21, 2010

SOURCE: Citizen Skyhawk Eco-Drive JR3090-58L instruction

http://www.citizenwatches.com.au/instruction-manuals

You will need the calibre number on the back of the watch but try this citizen site.