Question about Sony PS-LX250H Turntable

1 Answer

My sony pslx250h turnable belt was ordered and i can't find the repair book to repair it.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Pretty simple fix. Remove the mat, remove the turntable, install new belt on bottom of turntable hub. Place turntable back onto spindle. rotate turntable so you can see motor pulley. Stretch the belt from turntable hub over motor pulley, replace mat, enjoy.

Posted on Nov 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ineed a turntable belt for tpc-hd 12


Fixya is not a buying service. Try an internet search for turntable belts.

Oct 17, 2016 | Audio Players & Recorders

1 Answer

My turnable glass tray broke. I need another one.... Where do I find that for p100n30ap-f4


There are appliance parts stores that repair people go to. Check your phone book

Mar 07, 2015 | Microwave Ovens

1 Answer

Need a new belt for cassette drive on rt-sx1


you have a real antique there. Go to radio shack and take the belt with you so it can be measured, they have a parts order book there where you can find the correct belt. its so awesome that you still have this beautiful peice of equipment.

Mar 16, 2011 | Toshiba Sony CFDF10SILVER Boombox

1 Answer

I received a SONY PS-LX250H turntable with the drive belt off. Where do I route the drive belt to get it back on?


The Operating and Install Guides are here...

http://www.retrevo.com/support/Sony-PS-LX250H-Turntables-manual/id/752ag608/t/2/

http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&externalId=C310321&fes=true&mdl=PSLX250H

Follow this procedure to install the belt on the turntable.
  1. Lift up on the dust cover [FIG. 1] and remove it from the turntable base [FIG. 1].
  2. Remove the rubber mat [FIG. 1] from the platter [FIG. 1].
  3. Lift the platter straight up off the spindle [FIG. 1].
  4. Slip the drive belt around the under side of the platter [FIG. 2]. IMPORTANT: Line up the ribbon that is attached to the belt with the square opening near the edge of the platter .
  5. Place the platter back on the spindle .
  6. Spin the platter so the square opening on the platter is over the motor pulley [FIG. 1].
  7. Stretch the drive belt [FIG. 3] over the motor pulley by pulling the attached ribbon [FIG. 3].
  8. Remove the ribbon from the drive belt .
  9. Reinstall the rubber mat and the dust cover .

Jan 29, 2011 | Sony PS-LX250H Turntable

1 Answer

Turnable plate isn't working


in order to be 100 % sure
you would have to check voltage to the motor while its suppposed to operate
take off the bottom 6 screws, you might need whats called a safe t, a torque wrench or star with a hole
most use phillips,
drop the bottom, you should see the turn table motor
disconnect the two leads and connect them to a voltmeter,,,
turn the unit on
you should read voltage to the meter
if not the problem is in your control board and will need to be replace
if you do read voltage and the motor is not turning
you will need to replace the actual motor
either way its a pretty simple repair and can be done without taking the unit dwon

Oct 24, 2009 | GE XL1800 1100 Watts Microwave Oven

2 Answers

Where can i find a diagram to install serpentine


Most parts stores can print this out for you for free.

Sep 10, 2009 | 1991 Chrysler LeBaron

1 Answer

How do you put the belt back on my sony pslx250h.b?


its simple the belt goes around the platter and the motor spindle, thats it!

Jun 04, 2009 | Sony PS-LX250H Turntable

2 Answers

Need help wit belt 1194 940 volvo!


It is possible you are looking at the page for the 1994 960 and not the 940. The 960 had one (serpentine) belt. Your 940 has three. Hopefully chiltons has the repair order for the 940s as well.

I know it's not alot, but I hope it helps

Feb 21, 2009 | 1994 Volvo 940

2 Answers

Drive belt on Sony turntable


Usually, for most turntables, the belt goes on the bottom of the platter first. Then you put the platter back on the turntable. From here you should see an opening on the platter where you can 'grab' the belt. Pinch the belt, and then wrap it around the rotating motor's shaft. This is usually at the top left side - around the 10 o'clock position.

- OPTiC
Turntable Technician
www.1200s.com

Sep 07, 2008 | Sony PS-LX250H Turntable

Not finding what you are looking for?
Sony PS-LX250H Turntable Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...