Tv channel

Here are some steps to tune a Teac LED/LCD digital TV without a remote:

1. Find the TV's on-screen menu buttons on the TV itself (often located on the side or bottom of the TV)
2. Use the arrow buttons to navigate to the channel setup or tuning menu
3. Select "Auto Tuning" or "Channel Scan" and follow the on-screen instructions to scan for available channels
4. If the TV has manual tuning option, select it and input the frequency, symbol rate, and other information for each channel you want to add manually.
5. Once the tuning process is complete, the TV should display all the available channels. If you are unable to access the menu without a remote, consider using a universal remote that is compatible with your TV or obtaining a replacement remote from the manufacturer.

Hi,
Did you try to manual tune/search the channel? If you are using the autosearch/tune feature and the signal is not strong it will simply skip the channel. Find channel 3 with manual search and then save it. Good luck!

If you don't have a remote, your TV should have a built-in "Menu" button. Find and select the "Channel Scan" option in your TV's menu. This option is sometimes labeled "Rescan," "Tune," or "Auto-tune." If you can't find the "Channel Scan" option, dig through the TV's "Settings," "Tools," "Channels," or "Options" menu.
https://www.howtogeek.com/424853/how-to-scan-or-rescan-for-channels-on-your-tv/

you can program the channel manually, just press the menu button in the tv panel. select preset and then manual fine tuning to tuned every channel you want to watch and then save it.to make a manual fine tuning, press manual then select channel you want to tuned and then press vol. up/down button to search right frequency channel.do this process in every channel you want to tuned. hope this can help.

Go into the setting menu on the tv and go to channel setup,then select add channel.



please rate this solution

Hi i had the same problem but i have sorted mine now. What i was doing wrong was i wasnt tuning in the analoge channels only the freeview digital ones. To do this you need to first turn your tv on. Then press the "source" button, this will bring up a little menu at the top left hand side. When this menu comes up press the "Programme +" button (the one that you use for changing channels near the volume button) press this until you get up to "TV", when T.V is highlighted just wait 3 secs and it will switch over. You will probably get a blue screen with a no signal message (you are now on analogue) when you get this blue screen press the "tune" button. It will automatically start tuning in all of your channels, at first they will be fuzzy but as it works they will become clearer. Your sky channel will also be tuned in. When mine tuned in it didnt tune them in on the right numbers though, bbc2 was on number 1 etc. If you ever need to use a playstation or something it goes into the scart connection at the side of the t.v and you need to press "source" and go up to "scart". To get back onto the digital channels just press "dtv/dvd".
hope i helped!

use your tv/video button to change inputs

Hi,

If you've store the earlier channel, off the tv and on it again. Every should come back as normal.

Regards
alan

Your TV is set to Antenna. You need to go into the menu and change it to Cable. Then do an autoprogram.

Sounds like the signal is probably too strong. The TV is not the problem.