Question about HP LaserJet 4300 Printer

Open Question

How do i set DNS settings for HP LASERJET 4300. I

How do i set DNS settings for HP LASERJET 4300. I have the IP address and can go into the configuration page through the browser but cannot find where to change the DNS settings.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
checkitright
  • 1362 Answers

SOURCE: HP LASERJET 3055 Manual IP Address not saving

Try doing a cold reset first, then check that DHCP is manual not Auto. then try to input IP address again. If the Network card is seperate then you may only have to replace the Nic

Posted on Jul 16, 2008

Ad
  • 61 Answers

SOURCE: HP LaserJet 3055 unable to save IP setting

i can solved this problem please give me one chance

Posted on Jul 24, 2008

  • 1 Answer

SOURCE: HP JetDirect IP Address

how to assign the IP address to Hp color laserjet 2550Ln printer?

Posted on Sep 17, 2008

  • 1 Answer

SOURCE: HP LASERJET 3055 Manual IP Address not saving

Try flashing the firmware: one of the fixes is this - (Improved IP address management of DHCP to Manual changes).  See link below. Firmware


Gerben People tend to evaluate events in light of their paradigm rather than evaluate their paradigm in light of events.

Posted on Oct 07, 2008

Prefab
  • 152 Answers

SOURCE: how to i configure the

Hello, When you first install the printer onto the Network it will automatically find an IP Address, this is called "DHCP". In order to change the IP Address the printer needs to be setup as what is known as "STATIC". You can do this in in a couple of ways 1) Type the IP Adrees into an internet explorer Browser, this should open up the printers EWS (embedded Web Browser) if it opens click on the networking tab - Chnge the IP Address , set DHCP to "OFF"and click Apply. 2) From the printers control panel - push the "MENU" button and scroll down to the "CONFIGURE DEVICE" to "I/O" to "EMBEDDED JETDIRECT" Withi the TCIP setting you are able to change the printers IP Address

Posted on Jan 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

49.38.07 error


It a common HP error. It is a non spesific error. Usuly the printer having problems with a specific job you trying to print . The firmware needs updating, delete that job and turn off and on the printer, make sure IP address ,subnet mask and gateway are correct. Also win servers and DNS settings are all correct.update printer driver. Try printing via host name not IP.

Apr 19, 2014 | HP Laserjet Enterprise M4555 Mfp Laserjet...

1 Answer

Find proxy server address


Changing TCP/IP settings Win 7 TCP/IP defines how your computer communicates with other computers.
To make it easier to manage TCP/IP settings, we recommend using automated Dynamic Host Configuration Protocol (DHCP). DHCP automatically assigns Internet Protocol (IP) addresses to the computers on your network, if your network supports it. If you use DHCP, then you don't have to change your TCP/IP settings if you move your computer to another location, and DHCP doesn't require you to manually configure TCP/IP settings, such as Domain Name System (DNS) and Windows Internet Name Service (WINS). To enable DHCP or change other TCP/IP settings, follow these steps:
  1. Open Network Connections by clicking the Start button 4f6cbd09-148c-4dd8-b1f2-48f232a2fd33_818.jpg, and then clicking Control Panel. In the search box, typeadapter, and then, under Network and Sharing Center, click View network connections.
  2. Right-click the connection that you want to change, and then click Properties. 18abb370-ac1e-4b6b-b663-e028a75bf05b_48.jpg If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  3. Click the Networking tab. Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties. 25e7e385-9327-4f7d-aab0-afa5aaf952ba_49.jpgThe Network Connection Properties dialog box
  4. To specify IPv4 IP address settings, do one of the following:
    • To get IP settings automatically using DHCP, click Obtain an IP address automatically, and then click OK.
    • To specify an IP address, click Use the following IP address, and then, in the IP address, Subnet mask, and Default gateway boxes, type the IP address settings.
  5. To specify IPv6 IP address settings, do one of the following:
    • To get IP settings automatically using DHCP, click Obtain an IPv6 address automatically, and then click OK.
    • To specify an IP address, click Use the following IPv6 address, and then, in the IPv6 address, Subnet prefix length, and Default gateway boxes, type the IP address settings.
  6. To specify DNS server address settings, do one of the following:
    • To get a DNS server address automatically using DHCP, click Obtain DNS server address automatically, and then click OK.
    • To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.
    f598cd96-6bf9-47be-942d-7d0b0afdbd88_47.jpgThe Internet Protocol Version 4 (TCP/IPv4)Properties dialog box
  7. To change advanced DNS, WINS, and IP settings, click Advanced.

Mar 10, 2014 | Dell Latitude D600 Notebook

1 Answer

Try to connect the hp laserjet 8000 to network, since we connected with static ip, how could I change to dynamic ip?


First, why would you want a printer with a dynamic address? Do you have one reserved in the dhcp scope for it? Do you have the printer named in DNS? Printers are much easier to deal with when they have a static address, they're always in the same place on the network.
All that said, browse through the menus till you find the network setup find the IP menu and set it to automatic. Very simple. Make sure to save your configuration change.

Oct 24, 2013 | HP LaserJet 8000 Printer

1 Answer

Hp laserjet P2055dn - print config report indicates IPv6 Address, will not network print. How can I clear this?


IPv6 is upgraded from IPv4 (Internet protocol).. Its implemented in 1994 this adres is stored in DNS, it is no way connection with the printer, when the printer is connected through lan net work, auto IP adress will assign by the DNS server depend up on the settings.. you can change the desire IP adress with the family range. If the printer is not showing IPv6 adress, system administrator can help you in this regards depens upon their permissions. Selected printer IP adress ahould be with in the family range and no IP conflict definately printer will work..

Nov 19, 2011 | HP Office Equipment & Supplies

1 Answer

4300 laserjet wont print docs. IP address is same as a network computer, cannot change IP address? Configuration page prints and I check ports etc but will not print. cannot change IP address. Help....


Have you tried changing the IP address from within the driver's properties? Go into the print driver properties, and under the Ports tab, edit the 4300's port and change the IP address that it is associated with. You may need to reboot the printer once you make the change and save it, but that should allow you to change its IP address.

Jun 13, 2011 | HP LaserJet 4300 Printer

1 Answer

What is the default ip address of the printer hp laserjet 4250n?


There is no default IP address on HP printers with Jetdirect print server card.
You set the IP address in the printer's network settings. The IP address need to be set to match your network's address range.
To configure the HP network printer to work on your network, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559242-setting_up_hp_jetdirect_print_server_p

Dec 14, 2010 | HP LaserJet 4250n Printer

1 Answer

How do i change the ip address on an hp laserjet 430?


Use the buttons and the LCD on the printer, to navigate through the main-menu and the sub-menus, to change the IP-address.

Also, via the manufacturer's web-site: http://support.hp.com
select & download the "Quick Setup Guide" for your specific model of printer, and follow its instructions.

Nov 18, 2009 | HP LaserJet 4300 Printer

2 Answers

Dual Router Configuration


Plug the second router into the lan not the wan and it will act as a switch instead of a router

Oct 02, 2008 | D-Link DGL-4100 Router (DGL4100)

2 Answers

Cant get internet connection on my ps


first check wether you received a valid ip address for your local network. usually, this should be something like 192.168.x.y. if so, then you might indeed face a dns issue. dns is used to resolve web site names to ip address. usually, your ip service provider will broadcast the external dns servers for your router to recognize.

try to connect with a computer first. if it works, check the ip settings. if your computer also cannot connect without explicit dns server settings you can do one of the following:
- explicit dns server address in ps3. go to "advanced internet connection settings", and then to "dns settings" and set the dns server address
- purchase a 30$ network router and hook it between your internet and the ps3. in the router settings, set the dns server address to be broadcasted to the clients. you can use 168.126.63.1 and 2 which are dns servers in korea (i live in korea), but you might want to find the server near to your location or promoted by your isp

Jul 28, 2008 | Sony Playstation 3 (PS3) Console

3 Answers

HP LaserJet 3055 unable to save IP setting


i can solved this problem please give me one chance

Jul 05, 2008 | HP LaserJet 3055 All-In-One Printer

Not finding what you are looking for?
HP LaserJet 4300 Printer Logo

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...