Question about PC Desktops
Go to bios by pressing F2 while system get started then after entering the bios in boot sequence choose firstboot device as hdd and press f10 to exit and see
Posted on Jun 16, 2008
Tips for a great answer:
Oct 18, 2014 | PC Desktops
WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL.
Only work inside the computer case when the power has been switched off and disconnected. Never open the power source.
Some of the below steps recommend removing physical parts within the computer.
While in the computer it is highly recommend that you be aware of ESD and its potential hazards
Remove the power lead from the power in put on the computer
remove the side panels on on our computer you will see 4 screws 2 either side unscrew these
then remove the electrical lead and the sata lead remembering where these are located slide the hard drive out then put your new sata hard drive in placing the leads back to there original position then tighten the screws (do not overtighten)
i was unable to locate your spicific computer i hope this will guide you
Replacing a hard drive in a Compaq Presario SR5010NX PC
YouTube video install a second ide hard drive
laptop hard drive
Hope this helps.
Nov 25, 2012 | Compaq Presario 5240 (353200-003) PC...
Aug 05, 2011 | HP Compaq dc7100 PC Desktop
Dec 20, 2010 | Compaq Presario 5150 (320850-003) PC...
Mar 07, 2010 | HP Compaq Presario SR2023WM PC Desktop
May 18, 2009 | PC Desktops
Mar 02, 2009 | Compaq Presario 5000 PC Desktop
Dec 10, 2008 | Compaq Presario 5000 PC Desktop
34 people viewed this question
Usually answered in minutes!