Question about Samsung WEP200 Headset

1 Answer

It doesn't turn on

Hi.it fall on the floor ,with no breakage. when charging red light is on but blue light does't and no sounds.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Mine was doing this as well. I held the headset on the charger with the lid open and the red light on and then held the button down and the blue light flashed. I did a couple op checks and it works fine now.

Posted on Jul 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I plug up the bluetooth to charge the red light appears then it blinks blue red does that mean it is charging or not because it is not working with phone


That might meaning that's it's draining the residual charge left on the battery, before it can be charged, but if it does this for more than an hour, your battery is "toast".

Aug 28, 2014 | Universal QuickCell Q7 Bluetooth Headset -...

1 Answer

Red blinking light


Hi, Ephraim. The flashing red light indicates that the device is showing "low battery". It could be that the LG phone charger fits the charging port on your bluetooth headset but it is not compatible with your device. In order for you to know that it is charging, the device should show a steady red light(means charging).
Please take a look at the table reference below.
----------------------------------------------------------------------
•With the Charger Plugged In
______________________________________________________________________
•Headset Indicator Headset Status
Red-----------------------------------------------Charging (battery level less than 50% charge)
Yellow-------------------------------------------Charging (battery level more than 50% charge)
Green--------------------------------------------Charging complete
----------------------------------------------------------------------
======================================================================
======================================================================
======================================================================
----------------------------------------------------------------------
With No Charger Plugged In
__________________________
Headset Indicator Headset Status
______________________________________________________________________
Off ---------------------------------------------Power off
Three blue flashes------------------------Powering on/off
Steady blue --------------------------------Pairing/connect mode
Rapid blue/purple flashes -------------Connection successful
Quick blue flash --------------------------Incoming/outgoing call
Slow blue pulse --------------------------Connected (on a call)
Slow blue flash ---------------------------Standby (not on a call)
Slow red flash ----------------------------Idle (not connected to phone)
Slow purple pulse -----------------------Connected call muted
Steady red ---------------------------------Attempting to connect
Quick red flash ----------------------------Low battery

Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on
----------------------------------------------------------------------

Hope that'll help you in some way.
**Please rate my post and/or leave a comment** ...Thanks...

Sep 25, 2013 | Motorola Mobility H560 Bluetooth Headset

1 Answer

My plantronics voyager pro wont turn on, It doesn't fill power on-off bottom. I can only charge it correctly with red led. Each time when I press "volume+" bottom for 5 seconds while charging...


Sounds like you have a few things going on here that may be a procedural problem. We recommend reviewing your user guide, paying close attention to the "take a good look" and "tips". The link below for the Plantronics Voyager Pro+ should help.

Plantronics Voyager Pro+

Good luck from Headsets Direct!

Oct 13, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

Bluetooth wont charge or power on. when charging the red light comes on. once disconnected from charger it wont come on


Indicator Lights:
1.Headset Status Headset Indicator Light
2.Powering on Steady blue, then intermittent flashes
(changes to standby mode)
3.Powering off Red appears and goes off
4.Standby Blue intermittent flashes
5.Charging battery Red solid light. Light indicator turns off when
battery is fully charged and headset is off.
6.Low battery Triple red flashes
7.Pairing mode Blue/red alternating flashes
8.Missed call Purple flashes. Press the call control button
to cancel flashing light.
9.Incoming call Triple blue flashes when ringing.
Power on and off:
1.Turn on the headset Press and hold the call control button until the
indicator glows blue. You will hear ascending
tones.
2.Turn off the headset Press and hold the call control button until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
If none of this is helpful then it may be that your battery is dead, if that is the case then you will need to replace the whole headset. The battery's are not replaceable.

Good luck from Headsets Direct!

Sep 21, 2011 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

I just purchased a Voyager Pro. When trying to pair it with my Blackberry, I turned the device on and held the button down waiting for the LED to flash red/blue. The device turn on blue, then flashed red...


You will need to turn off your headset and then press and hold the power button until the LED starts to flash red/blue, red/blue, it will stay in this state for a few minutes.

Good luck from Headsets Direct - 800-914-7996.

Aug 08, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

How do I pair the earpiece with a phone? I do not have my directions.


Well first turn your phone's bluetooth ON Then turn ON your headset.Wait for the indicator light to turn from red to blue. (if it doesn't turn off your headset then turn it back on) Press and hold the Call Control button until the indicator light flashes red and blue. (meaning it's starting to pair) Set your phone to find/add bluetooth device and select your headset from the list found When pairing is successful the indicator light should turn blue and your phone will confirm the pairing.

hope that helps....

Jul 08, 2011 | Plantronics Explorer 240 Bluetooth Headset

1 Answer

The mad catz blue tooth mic #8860 wont charge how can i fix it?


Try to charge it on a USB on the PC, If the red light doesn't stay on, meaning it's charging, then you have a faulty headset and you'll have to contact your retailer to ask for a replacement.
Unfortunately this is a know issue with this headsets...
Hope it helps

Mar 02, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

Hi, I have a problem with my Backbeat 903's Charging. It said in the manual that the headset would glow red when charging. However, when I plugged the charger into an outlet, a small green light shone,...


It sounds like it may be defective, not sure if that is correct. Try a different plug and make sure that it is secure in the charging end. If this is defective, then you should be able to return to retail place of purchase and get a replacement if still under warranty.

Good luck from Headsets Direct!

Dec 27, 2010 | Plantronics Backbeat 903 Bluetooth...

Not finding what you are looking for?
Samsung WEP200 Headset Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Headsets Experts

kakima

Level 3 Expert

96417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xalint1
xalint1

Level 2 Expert

150 Answers

Are you a Samsung Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...