The panasonic TDA 200 the cards are only showing red light and the system is not initializing

have you tested the same line directly with an analog phone?Is it working?

If you still have that problem,visit www.wanetelecoms.com for help

The Panasonic TDA-50g comes out of the box with one ringing phone, extension 101. All the other phones light a solid red light when 101 rings. Is that what your system is doing?

Unless you have access to programming or a Maintenance Console and have intimate knowledge of system programs 623 and 624, you need to let your installer or dealer program ICD groups.

That programming is beyond the scope of a free forum.

Carl

A 7630 is a digital phone that connects to a TDA/TDE or NCP Panasonic phone system. There are 4 analog ports in a TDA-50 or lower phone system, so you could install an answering machine on the first 4 ports of a TDA by default. If you have a TDx-100 or higher, you have to have cards that contain analog ports.

However, you could always wire the answering machine on a specific line.

Carl

Not exactly sure what you're asking, so I'll give you 2 answers. If you mean extension number 134, the answer is yes. The whole universe of numbers are available to you and by default you can use 100-599 in a 3-digit numbering plan. You can grow beyond extension 134 if you have the hardware to support it.

If you're talking about 134 physical extensions, the answer is "maybe" The 200 has 11 card slots. Slot 11 is usually reserved for an option board for a message card and other features. Card slot 1 is usually a digital card for digital extensions, and you need at least one trunk card (slot 10?). That leaves slots 2-9 (8 total) for other cards. Each card is 16 analog or 32 digital extensions, so if the system is being used for single line stations, the answer is 128, but if digital you can expand the memory and address more than 128 extensions. Actually, I think you can address 256 ports before you have to expand the memory.

Carl

If your system wasnt installed by a certified dealer/tech then there isn't much you can do. The tools can be gotten from them. If you bought this from someone who doesn't support it or have the software then it hasn't been registered and will be useless. Again you must contact a dealer that can install these to help you.

i will making tda-200 ext and co lines cable

I am currently running Windows XP on my PC and upgraded it to a Windows Vista operation System does a USB driver exist for Windows Vista that will allow me to connect to my Panasonic KX-TDA 200 Phone System.

There may be some issue from the field side. use GDD fuses to protect the system. These are connected in the krone modules.

dear sir can i get softwear version 5 for tda 100 pbx exchange panasonic