Question about Pioneer Car Speakers & Subwoofers

1 Answer

I need a wiring harness for my deh-p730 - Pioneer Car Speakers & Subwoofers

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Most Pioneer units follow the below detailed color codes for the wiring.
Yellow - +12V Constant Power
Red - +12V Switched (accessory) Power
Blue - Power Antenna
Blue/White - Amp Turn-on
White - Left Front Positive Speaker Wire (LF+)
White/Black - (LF-)
Gray - Right Front Positive Speaker Wire (RF+)
Gray/Black - (RF-)
Green - Right Rear Positive Speaker Wire (RR+)
Green/Black - (RR-)
Purple - Left Rear Positive Speaker Wire (LR+)
Purple/Black - (LR-)

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jun 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need wiring diagram for a deh 2100 pioneer


If you are going to install the radio, I recommend you get a wiring harness specific to your vehicle. It will have the color codes on the package. All aftermarket radios have standardized color coding for wires. hope this helps

Aug 27, 2011 | Pioneer Car Speakers & Subwoofers

1 Answer

Lost wiring diagram deh-p2500 pioneer


If you going to install it, I recommend getting a wiring harness for the vehicle you are putting it in. The harness package will have the color code on it. All aftermarket radios have standardized wire color coding.

Aug 26, 2011 | Car Speakers & Subwoofers

1 Answer

Wiring diagram pioneer deh-p4950mp


If you are installing the radio, I recommend you purchase a wiring harness to your specific vehicle. The wiring harness will have the color code and all you have to do is match colored wires. All aftermarket radios have standardized color codes for their wires. Hope this helps.

Aug 25, 2011 | Car Speakers & Subwoofers

1 Answer

I have a DEH-P4900IB, and i need the wiring color codes


If you are planning to install this unit, I recommend using a wiring harness. The harness for your vehicle will come with the color codes on the package. All radio wires are standardized. Hope this helps.

Aug 18, 2011 | Pioneer Car Speakers & Subwoofers

1 Answer

I need to install a pioneer deh-p6600 in a 95 rodeo.


you only need 2 things and a few tools and tape or crimp clips and crimp tool, 1. installation kit for that year and make, 2. wire harness for that year and make. then all you have to do is follow the colors on the harness and radio harness, yes they are color coded.

Jan 10, 2010 | Car Speakers & Subwoofers

1 Answer

Installing A pioneer stereo Model DEH SP091 in to a chrysler sibering. Wiring on car is different the Pioneer stereo


you need a model specific wiring harness available at your local auto parts store, best buy, circuit city, etc...

Nov 30, 2008 | Car Speakers & Subwoofers

1 Answer

Got a new deh-6000ub and wire harness for honda accord dont know how to install the harness


You need an installation harness. You can get them at most anyplace that installs car stereos. Once you have the installation harness for your car, you just match up the colros of the wires on it to the same colors of the harness for the Pioneer. Make sure that each wire is insulated from anything by using some electrical tape and make sure they all have good connections. Strip away close to about an inch on each wire and then twist them together and then tape them good. After all the wires have been connected, all you need to do is plug the Pioneer harness into the Pioneer radio and then plug the installation harness into the factory wire harnees connector in the car. If you have any wires that do not match up in color, you can normally leave then not connected to anything, but make sure they are insulalted with electrical tape. Most all the wires should say what they are for. Matching the colors is the easiest way to do this.
Let me know if you need more help. I can always give you a detailed wiring of the Pioneer. I do not have the wiring diagrams for the car though.

Jul 20, 2008 | Pioneer Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Speakers & Subwoofers Experts

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Pioneer Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...