Question about Philips Remote Controls

Open Question

Programming code for daytek dk191

Hello i just purchased phillips universal remote sru4050
i need to find out the code to program my lcd tv daytek dk191

Posted by on

6 Suggested Answers

centralhigh
  • 260 Answers

SOURCE: RCA Universal #RC402A

Programming Your RCA Universal Remote.

The RCA universal remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes: TV-000, VCR-000, Cable Box-000, and AUX is programmed with VCR code 037. For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search: 1- Manually turn ON your device (TV, VCR, Cable Box) 2- Press and "HOLD" CODE SEARCH 3- Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once. 4- Release CODE SEARCH. 5- Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second). 6- Once the device turns off, press and release ENTER. 7- With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists: 1- Find codes for each device and brand below. 2- Press and "HOLD" CODE SEARCH. 3- Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step. 4- Enter the three digit code from the TV, VCR or Cable Box code lists. 5- Release CODE SEARCH. 6- With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists. TV Codes Admiral 005 MTC 011,019,027 Amtron 064 Multivision 081 Akai 002 NAD 018,023 Anam National 038 NEC 011,014,019,027,038 AOC 011,019,027,088 MTC 0017,0023 Bell & Howell 005 NEC 0017,0023 Candle 011,027,033 Panasonic 012,013,038,086 Citizen 011,027,033,064 Penny 000,008,011,019,027,068,086 Colortyme 011,027,084 Philco 006,007,010,011,013,016,019,027 Concerto 011,027 033,035,037,038,043,087,089 Contec/Cony 036,037,040,042,064 Philips 006,007,010,011,013,016,033,035 Craig 064 037,038,043,066,073 Curtis Mathes 000,011,015,027 Pioneer 011,027,045,062,093 CXC 064 Portland 011,019,027 Daewoo 011,019,027 ProScan 000 Daytron 011,027 Proton 011,027,037,072 Dimensia 000 Quasar 012,038,092 Electrohome 006,011,014,027,038 Radio Shack 000,021,025,036,037,059,064 061,068 RCA 000,006,011,019,027,034,038,044 Emerson 011,026,027,028,029,030 046,088 031,032,037,042,053,064 Realistic 021 065,067,075,076,079 Sampo 011,027 Envision 011,027 Samsung 006,011,014,015,019,027,036,037 Fisher 017,021,039,041 077 Funai 064 Sanyo 017,021,039,056,057,058 GE 000,008,009,011,012,027 Scott 028,037,064 038,068,086,089,091 Sears 000,006,011,014,017,018,021,023 Goldstar 003,004,006,011,019 027,039,040,041,051,071,083 027,037,050 Sharp 011,020,025,027,037,052,053,059 Hallmark 011,027 060 Hitachi 009,011,027,036,037 Signature 005,094 040,047,048,063,080 Sony 002 Infinity 013 Soundesign 011,027,033 JBL 013 Sylvania 006,007,010,011,013,016,027,033 Jensen 011,027 035,043,049,066,087,089 JVC 012,024,036,037,040,048,051,074 Symphonic 064,076 Kawasho 002,011,027 Tatung 038 Kenwood 006,011,014,027 Technics 012 Kloss Novabeam 035,043 Techwood 011,027 KTV 078 Teknika 011,019,027,033,037,040,066 Loewe 013 Telecaption 090 Luxman 011,027 TMK 011,027 LXI 000,013,018,021,023,054 Toshiba 018,021,023,071,085,090 Magnavox 006,007,010,011,013,016 Universal 008,009 027,033,035,043,066,087,089 Victor 051 Marants 013 Vidtech 019,027 Marantz 011,013,027,069 Wards 000,005,006,007,008,009,010,011 Memorex 005 013,019,025,027,028,035,043,059 MGA 006,011,014,019,022 066,076,082,089 027,041,056,061,068 Yamaha 006,014,019,027 Mitsubishi 006,011,014,019,022,027,041,055 Zenith 001 056,061,068

Posted on Jun 25, 2008

  • 1 Answer

SOURCE: Rrmote control codes

i need the code for philips universal remote i lose the code

Posted on Oct 12, 2008

imend
  • 66 Answers

SOURCE: unable to program Directv universal remote for tv

The RC64RB has more codes in it. Unfortunately, it is an extra $25. BUT, it is backlit, which is very cool at night. With my RC64RB, I get 16 codes to enter for your TV (Emerson HDTV).

Posted on Apr 07, 2009

  • 3 Answers

SOURCE: instructions on how to program RCA universal remote control

This link is a .pdf of the manual with directions on how to program the remote as well as all of the codes for various electronic brands for all equipment (DVD, TV, VCR, etc.):
http://www.lexrixa.com/vcr%20codes.pdf

Posted on Jun 20, 2009

  • 5 Answers

SOURCE: need code to program philips universal remote

most philips universal remotes have the "code search" option this is done by:
1: Manually turn on ur tv
2:hold setup untill red indicator stays on and release button
3: press and quickly release what you wanna program (i.e tv,vcr,ect.)
4:press channel up repeatedly untill your t.v changes channels(up to 300 times) if you over shoot the channel change press down til it changes again.
5: press and release MUTE to install the code.

Posted on Jul 17, 2009

  • 2 Answers

SOURCE: Need the instructions and Code to Program universal remote control PHILIPS (Magnavox) and Magnavox TV.

SETTING CODES
HOLD THE CODE SEARCH BUTTON DOWN UNTIL THE RED LIGHT STAYS LIT.

PRESS THE DEVICE BUTTON (ie TV)

CHANNEL UP BUTTON UNTIL THE CHANNEL CHANGES. (300 SHOULD BE MAXIMUM)

PRESS THE MUTE BUTTON TO SET THE CODE

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need to program my phillips universal remote CL035A to my Sylvania TV


Look in the manual of your
Phillips universal remote CL035A for ther listing of TV codes, take notes of codes for Sylvania and input codes accordig to instructions of your manual.
If you can locate Sylamia, follow instrucions for unspecified device.
You don't have a manual?

How to Program Philips Remote Control Without the Codes eHow

Jun 19, 2015 | Sylvania Remote Controls

2 Answers

I NEED TO PROGRAM A MAGNAVOX TV WITH A PHILLIPS UNIVERSAL REMOTE CONTROLL


Find codes and methods here.
http://www.docstoc.com/docs/23925020/Programming-Remote-Control-Brand-Codes-TV-Sets

If those codes dont work try the last three(or four) numbers of your TV's serial number.

On my universal remote is just a matter of holding down the TV button till the light stays on, then punching in the three digit TV code. When the TV turns off it's the right code. But read your manual for your controller.

Oct 08, 2010 | Universal Remote Control Universal IR...

1 Answer

How do I link my shaw cable remote to my daytek TV


If your Shaw cable remote is universal, you will need to find the codes to program the remote to work with your Daytek TV. If it is not, you need to purchase one (usually @ $10) and program both devices to function with the new one. I hope this helps and good luck.

Oct 27, 2009 | Remote Controls

2 Answers

Need code to program a phillips universal remote control CL035A


Hello Allen,
Here is a link for you. Hope this helps you out

http://www.universal-remote.net/philipsmagnavox.html

Cheers Little Dish Fitter.

If this helps you out please leave a thumbs up

Oct 09, 2009 | Philips Remote Controls

1 Answer

Cannot program new phillips remote to rca tv


[http://voxrightnow.custhelp.com/cgi-bin/voxrightnow.cfg/php/enduser/std_adp.php?p_faqid=1769&p_created=1209688350&p_sid=6-sdxLAj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9ODE4LDgxOCZwX3Byb2RzPTE1OCZwX2NhdHM9MCZwX3B2PTEuMTU4JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1yY2Egc3lzdGVtIDUgcmVtb3RlIGNvbnRyb2w*&p_li=&p_topview=1] follow this web link it will take you to the RCA customer support web page for programming universal remote controls and lists codes under system components. The television codes for the universal remote are listed under TV. This web page should be able to help you solve your problems with the programming of the universal remote control and give you the codes needed to use it with the components in your system. Thank you for using FixYa and have a nice day!

Dec 02, 2008 | RCA DIRECTV Satellite Remote Control

3 Answers

I NEED CODES FOR TV DAYTEK AND HOW TO PROGRAM THIS


we have a 21" daytek hi def tv with no book or control. help?

Oct 31, 2008 | One For All URC-3021 Remote Control

2 Answers

Philips sru4050/17


Well I can set your mind at rest Melissa, your remote DOES exist and is supported on the manufacturers website. Manual is available at the following address:

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?qslg=on&mode=search&session=20080317191830_80.5.101.123&scy=US&ctn=SRU4050%2F17&ds=SRU4050%2F17&slg=AEN&searchtext=manual&submit.x=10&submit.y=5

Hope that helps,

erch.

Feb 24, 2008 | Philips Magnavox Learning Universal Remote

10 Answers

Remote control code/daenyx tv/dvd combo


Your TV is made by Daewoo and is distributed by Daytek. If you call the 800 number on the warranty card you will reach Daytek.
So, what you need to know is this:

#1. A lot of new products won't have a website available. That does not say anything to their quality or the company, just that you've bought a new product and you're one of the first purchasers.

#2. A lot of times if you buy a "no name" TV, you're actually getting components inside the TV that are made by brand name manufacturers. For example, "Prima" uses LG panels in some of their plasma TVs (as well as Daytek). How do I know this? Because I'm the authorized service provider for Daytek, and Prima and quite a few other "no name" TVs, and I've been working on LCD and Plasma since they came out, as well as having worked in the electronics repair industry for over 20 years. I own an Insignia 42" LCD and am quite happy with it.

#3. Most new products that have remote controls will not have codes available for them no matter what brand of universal remote you buy. You have to wait for the people who make the universal remote to have time to make a code for this new brand of TV. This can take up to a year for cable companies, and cheaper universal remotes may never get the code. Expensive universal remotes may be able to have their firmware updated through the internet, so adoption of new codes for new products may happen faster.

#4. Stores like Walmart and Costco are excellent places to buy products like this because they usually have a "no questions asked" return policy if you get the TV back to the store within the stores time limit for returns (some stores are 15 days, some are 30 days, phone the store and ask them). I had purchased a 40" Digistar LCD TV from Walmart what had a flickering problem, I took it back the next day without any problem at all. Then I bought a 42" Insignia Plasma TV from Future Shop that I wasn't happy with. I took it back 3 days later and had no problem at all. As long as you know the stores policy for returns and follow the policy, you won't have any problems either.

#5. Try to avoid buying big-ticket items from smaller stores unless you know their return policies. Some smaller stores will not accept returns on LCD monitors, TVs or plasma TVs but instead require you to handle any problems through the manufacturer.

#6. Best bet it to call Daytek and ask them if they know of any universal remotes that work on that particular model.

Oct 07, 2007 | RCA Universal Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

597 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Remote Controls Experts

Ross Keen

Level 3 Expert

1138 Answers

gbob59

Level 3 Expert

2963 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Philips Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...